This work aimed to examine the performance of the hybrid sintering of clay ceramic in a microwave furnace, compared to the sintering process in a conventional furnace. The raw materials were subjected to X-ray fluorescence, loss on ignition (LOI), X-ray diffraction, particle size distribution, real specific mass, and thermogravimetric analyses. The red clay ceramic mass was prepared, extruded, pre-sintered in a conventional furnace at 600°C/60 min, and sintered at temperatures between 700 °C and 1100 °C. The sintering conventional (resistive oven) was carried out for 60 min with a heating rate of 10°C/min. In the microwave furnace, the sintering times were 5, 10, and 15 min, with a heating rate of 50°C/min, with a sintering chamber coated with silicon carbide (susceptor). The sintered specimens were characterized according to linear shrinkage, water absorption, apparent porosity, apparent specific mass, X-ray diffraction, Raman spectroscopy analysis, spectroscopy analysis in the ultraviolet and visible regions, microhardness, and scanning electron microscopy. The results showed that microwave sintering promoted an increase in the microhardness and apparent specific mass, and reduction in water absorption and apparent porosity values, due to greater densification in the microstructure. The best results occurred for specimens sintered at 1100°C. 相似文献
Mother–daughter dyads from incestuous vs nonclinical families were compared in terms of (1) family life stress, (2) problem-solving appraisal, (3) direct coping behaviors, (4) mother–daughter communication, and (5) family adaptation and cohesion. 15 mother–daughter pairs from an incestuous family involving an adult male caretaker were matched on several variables to 16 mother–daughter pairs from a nonclinical family. The results revealed that mothers from the incest group (compared with the nonclinical group) reported greater amounts of family life stress, had more negative perceptions of their problem-solving appraisal, and reported more communication difficulties. The daughters from the incest group appeared to be quite similar to the nonclinical group daughters, although they did acknowledge more family stress. Implications of the results for therapeutic interventions as well as future research were discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved) 相似文献
In the XML file of the original article, H. Redl’s affiliation is incorrect. It is listed correctly in both the paper and
PDF versions of the article, and can be found below:
The online version of the original article can be found at 相似文献
The aerospace industry still uses fault trees to perform reliability analysis. This is because fault-tree modeling and analysis (FTA) seems easier to practical engineers when compared with Markov models, even though FTA provides a weaker form of analysis. In this paper, we propose an automatic strategy for generating Markov-based models and corresponding analysis formulations, according to ARP 4761, directly from Simulink diagrams annotated with failure information. The generated Markov-based models are expressed in the formal language PRISM, and the analysis is carried out by the PRISM model checker. The strategy is compositional and based on a comprehensive set of translation rules from Simulink to PRISM. We briefly address soundness and completeness of the rules and, to illustrate the application of the strategy, we apply it to a classical avionics case study: an actuator control system. 相似文献
Tau protein is largely responsible for tauopathies, including Alzheimer’s disease (AD), where it accumulates in the brain as insoluble aggregates. Tau mRNA is regulated by alternative splicing, and inclusion or exclusion of exon 10 gives rise to the 3R and 4R isoforms respectively, whose balance is physiologically regulated. In this sense, one of the several factors that regulate alternative splicing of tau is GSK3β, whose activity is inhibited by the cellular prion protein (PrPC), which has different physiological functions in neuroprotection and neuronal differentiation. Moreover, a relationship between PrPC and tau expression levels has been reported during AD evolution. For this reason, in this study we aimed to analyze the role of PrPC and the implication of GSK3β in the regulation of tau exon 10 alternative splicing. We used AD human samples and mouse models of PrPC ablation and tau overexpression. In addition, we used primary neuronal cultures to develop functional studies. Our results revealed a paralleled association between PrPC expression and tau 4R isoforms in all models analyzed. In this sense, reduction or ablation of PrPC levels induces an increase in tau 3R/4R balance. More relevantly, our data points to GSK3β activity downstream from PrPC in this phenomenon. Our results indicate that PrPC plays a role in tau exon 10 inclusion through the inhibitory capacity of GSK3β. 相似文献
Social network services (SNSs) have brought new possibilities and challenges to the design of software environments that respect people’s cultural differences. These systems may represent an opportunity for social and digital inclusion. However, search mechanisms in these systems impose serious barriers for people in the process of acquiring digital literacy. One of the barriers is the difficulty of using the adequate terms/keywords to perform content searches. This paper presents an approach to allow ordinary, non-technology proficient people to access the content of a network through the use of search parameters that make sense to them. The proposal is grounded on Semantic Web technologies (Web ontology) combined with Organizational Semiotics concepts and methods to identify the users’ profile and language. A case study was conducted with the search mechanism integrated into a SNS, and a preliminary evaluation reveals the advantages and drawbacks of the approach. 相似文献
AbstractSewage treatment can be classified into three phases: liquid, gaseous, and solid. Treatment of solids is performed in several steps, and the greatest difficulty in removing water from sewage sludge is due to the bound water present in the sludge. Thus, biodrying, a drying method that can be classified as biological, has been recently applied to treat this type of waste. This review paper aims to report and compile data from 49 biodrying assays of sewage sludge found in the literature (through the present, 2019) into one synthesis table, to discuss and compare the numerous variables found in these papers and their implications for biodrying, and to suggest possibilities for future research. This paper additionally intends to improve knowledge of biodrying and to consequently contribute to the monitoring and understanding of the process. 相似文献
Multimedia Tools and Applications - Measuring and analyzing the flow of customers in retail stores is essential for a retailer to better comprehend customers’ behavior and support... 相似文献
For an autonomous system to perform maintenance tasks in a networking device or a radio base station (RBS), it has to deal with a series of technological challenges ranging from identifying hardware-related problems to manipulating connectors. This paper describes the development of a robot maintenance system dedicated to detect and resolve faulty links caused by unplugged or poorly connected cables. Although the maintenance system relies on four subsystems, we significantly focus on our low-cost and efficient custom gripper solution developed to handle RJ45 Ethernet connectors. To examine our gripper, we conducted three experiments. First, a qualitative questionnaire was submitted to 30 users in the case of the teleoperated scenario of the gripper attached to a robotic arm. Similarly, we also tested the automatic operation mode. The results showed that our system is reliable and delivers a highly efficient maintenance tool in both teleoperated and autonomous operation modes. The practical experiment containing the removal or unplugging of connectors demonstrated our gripper’s ability to adequately handle these, whereas the feedback from the questionnaire pointed to a positive user experience. The automatic test assessed the gripper’s robustness against the continuous operation.