Phosphine-induced sterility in Ephestia cautella (Lepidoptera: Pyralidae)

The present study was conducted to explore the sterilizing effect of phosphine on Ephestia cautella. Three to four-day old pupae were exposed to 0, 0.007, 0.014, 0.021, 0.028, 0.035, 0.042 and 0.049 mg/l of phosphine for 24 h at room temperature. The normally developed adults of each treatment were pair mated and several physiological and genetical parameters were investigated. The results showed gradual increases with dose in pupal mortality and adult malformation. The crossing results showed no changes in adult longevity and mating frequency. However, consistent reduction was noted in the fecundity and fertility of normally emerged adults. Preliminary data indicated similar levels of inherited sterility in the F₁ adults raised from the above mentioned crosses.     

On the kinetics of the autoxidation of fats: influence of pro‐oxidants,antioxidants and synergists

The influence of minor amounts of pro‐ and anti‐oxidants on the kinetics of the autoxidation of fat has been evaluated. The reaction rates of oxygen with the substrates were found to follow the same basic equation, hitherto established for pure substrates. There is evidence that the surface of the reaction vessel also acts as a reaction catalyst and its effect is proportional to the area of glass in contact with lipids. Oxidation is enhanced by trace metal ions as well as by surface‐active compounds (e.g. hydroperoxides and sterols). Antioxidants such as α‐tocopherol and butylated hydroxyanisole inhibit the oxidation by delaying the start of oxygen consumption (the induction period) while retarders like amino acids only decrease the rate of oxidation. Thus pro‐ and anti‐ oxidants affect either the start or the rate of oxygen consumption. The empirical formula dx/dt = k [O₂] (1‐x/n) f′(t) was found applicable to the different stages of oxidation.     

Lignan contents in sesame seeds and products

Sesame seed (Sesamum indicum L.) is a rich source of furofuran lignans with a wide range of potential biological activities. The major lignans in sesame seeds are the oil‐soluble sesamin and sesamolin, as well as glucosides of sesaminol and sesamolinol that reside in the defatted sesame flour. Upon refining of sesame oil, acid‐catalyzed transformation of sesamin to episesamin and of sesamolin to epimeric sesaminols takes place, making the profile of refined sesame oils different from that of virgin oils. In this study, the total lignan content of 14 sesame seeds ranged between 405 and 1178 mg/100 g and the total lignan content in 14 different products, including tahini, ranged between 11 and 763 mg/100 g. The content of sesamin and sesamolin in ten commercial virgin and roasted sesame oils was in the range of 444–1601 mg/100 g oil. In five refined sesame oils, sesamin ranged between 118 and 401 mg/100 g seed, episesamin between 12 and 206 mg/100 g seed, and the total contents of sesaminol epimers between 5 and 35 mg/100 g seed, and no sesamolin was found. Thus, there is a great variation in the types and amounts of lignans in sesame seeds, seed products and oils. This knowledge is important for nutritionists working on resolving the connection between diet and health. Since the consumption of sesame seed products is increasing steadily in Europe and USA, it is important to include sesame seed lignans in databases and studies pertinent to the nutritional significance of antioxidants and phytoestrogens. It is also important to differentiate between virgin, roasted and refined sesame oils.     

A multivariate study of the correlation between tocopherol content and fatty acid composition in vegetable oils

The main biochemical function of the tocopherols is believed to be the protection of polyunsaturated fatty acids (PUFA) against peroxidation. A critical question that must be asked in reference to this is whether there is a biochemical link between the tocopherol levels and the degree of unsaturation in vegetable oils, the main source of dietary PUFA and vitamin E. We used a mathematical approach in an effort to highlight some facts that might help address this question. Literature data on the relative composition of fatty acids (16:0, 16:1, 18:0, 18:1, 18:2, and 18:3) and the contents of tocopherols (α-, β-, δ-, and γ-tocopherol) in 101 oil samples, including 14 different botanical species, were analyzed by principal-component analysis and linear regression. There was a negative correlation between α- and γ-tocopherols (r=0.633, P<0.05). Results also showed a positive correlation between linoleic acid (18:2) and α-tocopherol (r=0.549, P<0.05) and suggested a positive correlation between linolenic acid (18:3) and γ-tocopherol.     

Variations in the composition of sterols,tocopherols and lignans in seed oils from fourSesamum species

Seeds from different collections of cultivatedSesamum indicum Linn and three related wild species [specifically,S. alatum Thonn.,S. radiatum Schum & Thonn. andS. angustifolium (Oliv.) Engl.] were studied for their oil contents and fatty acid composition of the total lipids. The oils from wild seeds were characterized by higher percentages of unsaponifiables (4.9, 2.6 and 3.7%, respectively) compared toS. indicum (1.4–1.8%), mainly due to their high contents of lignans. Total sterols accounted forca. 40, 22, 20 and 16% of the unsaponifiables of the four species, respectively. The four species were different in the relative percentages of the three sterol fractions (the desmethyl, monomethyl and dimethyl sterols) and in the percentage composition of each fraction. Campesterol, stigmasterol, sitosterol and Δ⁵-avenasterol were the major desmethyl sterols, whereas obtusifoliol, gramisterol, cycloeucalenol and citrostandienol were the major monomethyl sterols, and α-amyrin, β-amyrin, cycloartenol and 24-methylene cycloartanol were the main dimethyl sterols in all species. Differences were also observed among the four species in sterol patterns of the free sterols compared to the sterol esters.Sesamum alatum contained less tocopherols (210–320 mg/kg oil), andS. radiatum andS. angustifolium contained more tocopherols (ca. 750 and 800 mg/kg oil, respectively) than didS. indicum (490–680 mg/kg oil). The four species were comparable in tocopherol composition, with γ-tocopherol representing 96–99% of the total tocopherols. The four species varied widely in the identity and levels of the different lignans. The percentages of these lignans in the oils ofS. indicum were sesamin (0.55%) and sesamolin (0.50%).Sesamum alatum showed 1.37% of 2-episesalatin and minor amounts of sesamin and sesamolin (0.01% each).Sesamum radiatum was rich in sesamin (2.40%) and contained minor amounts of sesamolin (0.02%), whereS. angustifolium was rich in sesangolin (3.15%) and also contained considerable amounts of sesamin (0.32%) and sesamolin (0.16%).     

Variation in fatty acid composition of the different acyl lipids in seed oils from fourSesamum species

Seeds from different collections of cultivatedSesamum indicum Linn. and three related wild species [specifically,S. alatum Thonn.,S. radiatum Schum and Thonn. andS. angustifolium (Oliv.) Engl.] were studied for their oil content and fatty acid composition of the total lipids. The wild seeds contained less oil (ca. 30%) than the cultivated seeds (ca. 50%). Lipids from all four species were comparable in their total fatty acid composition, with palmitic (8.2–12.7%), stearic (5.6–9.1%), oleic (33.4–46.9%) and linoleic acid (33.2–48.4%) as the major acids. The total lipids from selected samples were fractionated by thin-layer chromatography into five fractions: triacylglycerols (TAG; 80.3–88.9%), diacylglycerols (DAG; 6.5–10.4%), free fatty acids (FFA; 1.2–5.1%), polar lipids (PL; 2.3–3.5%) and steryl esters (SE; 0.3–0.6%). Compared to the TAG, the four other fractions (viz, DAG, FFA, PL and SE) were generally characterized by higher percentages of saturated acids, notably palmitic and stearic acids, and lower percentages of linoleic and oleic acids in all species. Slightly higher percentages of long-chain fatty acids (20∶0, 20∶1, 22∶0 and 24∶0) were observed for lipid classes other than TAG in all four species. Based on the fatty acid composition of the total lipids and of the different acyl lipid classes, it seems thatS. radiatum andS. angustifolium are more related to each other than they are to the other two species.     

Recycling of used engine oil by different solvent

The refining of lubricating oils from waste lubricating oil was examined utilizing a novel blend of solvent extraction and activated alumina adsorbent. The activity of these solvent extraction blends {toluene, butanol and methanol (A)}, {toluene, butanol and ethanol (B)} and {toluene, butanol and isopropanol (C)} was evaluated experimentally, oil to solvent proportions from 1:1 to 1:3 were analyzed for mixture blend (C). The results confirm solvent mixture (A) gave good efficiency with the highest percent sludge removal. The maximum percent of sludge removal improves with the increase of solvent to oil ratios. The physical properties of the recycle oil were measured. The results show the change in the properties of recycling oil and have good efficiency.     

Natural convection from isothermal flat surfaces

Local heat-transfer coefficients along a flat plate in natural convection in air were measured using Boelter-Schmidt type heat flux meters. Experiments were carried out for different temperature differences in heating and cooling, and with inclinations varying from the horizontal “facing upwards” position, through the vertical position, to the horizontal “facing downwards” position.

The results are presented in terms of local Nusselt number as a function of the local Grashof number “tangential component”. All runs were in the range accepted as that of laminar boundary layer flow. However, under certain conditions when the normal velocity component of the air is directed away from the surface, separated flow is indicated along the trailing part of the surface, well before turbulence sets in in the boundary layer. Separation starts at a certain point along the surface. This point is nearer to the leading edge the higher the temperature difference, and the larger the inclination of the surface to the vertical.

In a separation region, the flux density is uniform. In all other regions the results agreed closely with established theories of laminar boundary layer flow.

A leading adiabatic section, used in some of the experiments, did not affect the results. An appendix gives relations recommended for engineering calculations.