Novel electrospun polymer electrolytes incorporated with Keggin‐type hetero polyoxometalate fillers as solvent‐free electrolytes for lithium ion batteries

In this study, solvent‐free nanofibrous electrolytes were fabricated through an electrospinning method. Polyethylene oxide (PEO), lithium perchlorate and ethylene carbonate were used as polymer matrix, salt and plasticizer respectively in the electrolyte structures. Keggin‐type hetero polyoxometalate (Cu‐POM@Ru‐rGO, Ni‐POM@Ru‐rGO and Co‐POM@Ru‐rGO (POM, polyoxometalate; rGO, reduced graphene oxide)) nanoparticles were synthesized and inserted into the PEO‐based nanofibrous electrolytes. TEM and SEM analyses were carried out for further evaluation of the synthesized filler structures and the electrospun nanofibre morphologies. The fractions of free ions and crystalline phases of the as‐spun electrolytes were estimated by obtaining Fourier transform infrared and XRD spectra, respectively. The results showed a significant improvement in the ionic conductivity of the nanofibrous electrolytes by increasing filler concentrations. The highest ionic conductivity of 0.28 mS cm^?1 was obtained by the introduction of 0.49 wt% Co‐POM@Ru‐rGO into the electrospun electrolyte at ambient temperature. Compared with solution‐cast polymeric electrolytes, the electrospun electrolytes present superior ionic conductivity. Moreover, the cycle stability of the as‐spun electrolytes was clearly improved by the addition of fillers. Furthermore, the mechanical strength was enhanced with the insertion of 0.07 wt% fillers to the electrospun electrolytes. The results implied that the prepared nanofibres are good candidates as solvent‐free electrolytes for lithium ion batteries. © 2020 Society of Chemical Industry     

An adaptive tracking problem for a family of retarded time-delay plants

Most of the existing switching control techniques are developed specifically for finite-dimensional linear time-invariant (LTI) systems. In many practical applications, however, it is essential to take time delay into consideration in the modelling as the control system can be highly sensitive to delay. In this paper, a multi-model switching control algorithm is proposed for retarded time-delay systems. It is assumed that the plant is represented by a family of known multi-input multi-output, observable, LTI models with multiple delays in the states, and that corresponding to each model in the known family, there exists a high-performance finite-dimensional LTI controller. In addition, it is supposed that a bound on the magnitude of the external inputs and disturbances is available. It is then shown that the proposed switching controller can stabilize the uncertain system, and that under some mild conditions, output tracking can be achieved in the given problem setting. Copyright © 2007 John Wiley & Sons, Ltd.     

A model to predict the solubility and permeability of gaseous penetrant in the glassy polymeric membrane at high pressure

In this work, the transport properties of gaseous penetrant through several dense glassy polymeric membranes are studied. The nonequilibrium lattice fluid (NELF) in conjunction with the modified Fick's law and dual mode sorption model was used to simulate the gas transport in glassy polymeric membranes. The approach is based on the sorption, diffusion, in which solubility is calculated based on the NELF model, and diffusion coefficient is obtained from the product thermodynamic coefficient and molecular mobility. The governing equation is solved by the finite element method using COMSOL multi-physics software. The developed model for gas permeability of glassy polymeric membrane can be applied in a wide range of pressure and temperature. The comparison of the calculated permeability and solubility of gasses with the experimental data represented the ability of the developed model. Increasing feed gas temperature increases the gas permeability, while this variation leads to lower gas solubility in the glassy polymeric membranes. The effect of feed temperature and pressure on permeability and solubility is investigated, and the experimental data from literature are described by the developed model. A good prediction of the experimental data can be observed over the considered condition.     

Pervaporative removal of acrylonitrile from aqueous streams through polydimethylsiloxane membrane

This study describes the successful separation of acrylonitrile (ACN) from dilute aqueous streams using pervaporation process. The influences of ACN feed concentration, permeate pressure, operating temperature, feed flow rate and membrane thickness on the membrane separation performance were investigated. The results showed that with an increase in ACN concentration in the feed solution, the permeation flux of ACN increased while the enrichment factor decreased. It was also indicated that increasing the permeate pressure reduced the driving force for mass transfer and consequently the permeation flux dropped while the enrichment factor enhanced. Polydimethylsiloxane membranes used in this study showed very good properties in the separation process, leading to enrichment factors in the range of 70-140. Furthermore, the activation energy for pervaporation of both ACN and water calculated from Arrhenius plot indicated that the permeation of water through the membrane was more temperature dependant than ACN.     

Investigating the effect of nano-silica on efficiency of the foam in enhanced oil recovery

Due to the vast production of crude oil and consequent pressure drops through the reservoirs, secondary and tertiary oil recovery processes are highly necessary to recover the trapped oil. Among the different tertiary oil recovery processes, foam injection is one of the most newly proposed methods. In this regard, in the current investigation, foam solution is prepared using formation brine, C₁₉TAB surfactant and air concomitant with nano-silica (SiO₂) as foam stabilizer and mobility controller. The measurements revealed that using the surfactant-nano SiO₂ foam solution not only leads to formation of stable foam, but also can reduce the interfacial tension mostly considered as an effective parameter for higher oil recovery. Finally, the results demonstrate that there is a good chance of reducing the mobility ratio from 1.12 for formation brine and reservoir oil to 0.845 for foam solution prepared by nanoparticles.     

One-pot synthesis of hematite-alumina hollow sphere composite by ultrasonic spray pyrolysis technique with high adsorption capacity toward PAHs

A hybrid nanocomposite of alumina and hematite was synthesized by ultrasonic spray pyrolysis technique. The study of microscopic images, mapping analysis, and XRD patterns revealed that the Al₂O₃ – Fe₂O₃ nanocomposite was composed of separated spherical particles with a thin layer ball-shaped structure that metal oxides are uniformly distributed in the wall of hollow sphere particles, led to a coherent and monotonous construction. A series of coefficients of equilibrium sorption of polycyclic aromatic hydrocarbons (PAHs) as hazardous materials were measured on the prepared composite material in a batch technique. The free or pure Al₂O₃ or Fe₂O₃ showed negligible removal efficiency for the mentioned analytes. The various significant variables, such as initial analyte concentration, solution pH, adsorbent dose, and contact time to remove analyte, were studied in the aqueous solutions. Adsorption data were modeled to Langmuir, Freundlich, and Temkin isotherms, and a good correlation found in the case of Langmuir isotherm and adsorption capacity for anthracene, phenanthrene, and naphthalene were 370, 333, and 322 mg g^?1, respectively. Investigation of the kinetic models proved a pseudo-second-order, and the prepared adsorbent can be reused more than 7 times without a significant decrease of adsorption performance.     

Vernacular architecture: questions of comfort and practicability

A paradoxical situation exists where vernacular building traditions are in a state of decline and are being replaced by modern counterparts, but they are repeatedly cited in the academic literature as exemplary models of environmental practice. This paradox is examined through research on whether vernacular passive cooling systems in the hot and dry climates of present-day Iran are practicable for the provision of comfortable indoor temperatures. Investigating their technical thermal performance as well as user perceptions and behaviour, positive and negative attributes of the cooling systems are identified. If conclusions about the long-term viability of vernacular buildings are to be drawn, then social, cultural, economic and environmental attributes need to be taken into consideration. Despite rather widespread and persistent assumptions, vernacular building traditions are not necessarily able to survive and the choices made by local people regarding the continuation or abandonment of specific traditions are influenced by a variety of cultural and practical factors. This substantiates the necessity of an integrated and holistic approach that engages with these variables in order to acquire a better understanding of the conditions for the survival of vernacular traditions.

Le fait que les traditions architecturales vernaculaires se trouvent dans un état de déclin et sont remplacées par leurs équivalents modernes, alors même qu'elles sont citées à maintes reprises dans la littérature universitaire comme des modèles exemplaires de pratique environnementale, constitue une situation paradoxale. Ce paradoxe est étudié au travers de recherches visant à déterminer si les systèmes de refroidissement passif vernaculaires sous les climats chauds et secs de l'Iran d'aujourd'hui peuvent être mis en pratique pour assurer des températures intérieures confortables. L’étude de leurs performances thermiques techniques aussi bien que des perceptions et du comportement des utilisateurs permet d'identifier les attributs positifs et négatifs des systèmes de refroidissement. S'il faut tirer des conclusions concernant la viabilité à long terme des bâtiments vernaculaires, il est alors nécessaire de prendre en considération les attributs sociaux, culturels, économiques et environnementaux. En dépit de présomptions plutôt répandues et tenaces, les traditions architecturales vernaculaires ne sont pas nécessairement capables de survivre et les choix opérés par les populations locales quant à la poursuite ou l'abandon de traditions spécifiques sont influencés par divers facteurs culturels et pratiques. Ceci confirme la nécessité d'une approche intégrée et holistique qui, par ces variables, incite à acquérir une meilleure compréhension des conditions propres à assurer la survie des traditions vernaculaires.

Mots clés: confort adaptatif, performances des bâtiments, attentes, traditions locales, occupants, refroidissement passif, architecture vernaculaire, Iran