Photocatalytic Property and Electronic Structure of Lanthanide-based Oxysulfides

Lanthanide-based oxysulfides and sulfide, LnTaO_3.5S_0.5, Ln₁₀OS₁₄ (Ln = La, Pr, Nd, Sm) and La₄In₅S₁₃, were successively synthesized by sulfurization in a flowing H₂S. The sulfurization decreased the band-gap energies from >4 eV to <3eV, because of the formation of occupied S3p orbitals on the top of valence band. In accordance with the small band gap, the H₂ evolution from a 0.01 M Na₂S and 0.01 M Na₂SO₃ solution system was observed under irradiation of light up to >500 nm. The rate of H₂ evolution under light irradiation of >500 nm increased in the order of Ni/LaTaO_3.5S_0.5 < Ru/La₁₀OS₁₄ < Pt/La₄In₅S₁₃.     

Successful surgical repair for a patient with atrial septal defect and severe pulmonary hypertension--its surgical indication and prostaglandin E1 use for postoperative pulmonary hypertensive crisis

A 45-year-old woman with atrial septal defect and pulmonary hypertension was admitted for surgical repair. Cardiac catheterization data revealed pulmonary to systemic flow ratio (Qp/Qs) of 1.81, pulmonary artery pressure (PAP) of 82/30 mmHg and pulmonary vascular resistance (PVR) of 10.8 unit. Open lung biopsy was added to evaluate pulmonary vascular obstructive disease (PVOD) which was shown Heath-Edwards grade 3 PVOD. Following closure of the defect, PAP (systolic) exceeded momentarily systemic level after cardiopulmonary bypass. Prostaglandin E1 drip was remarkably effective to bring down PAP during early postoperative period. Although PAP has not been shown significant decrease on catheterization of one year after surgery, great symptomatic improvement has been achieved.     

Formation of low-resistivity poly-Si and SiNx films by Cat-CVD for ULSI application

In this paper, bulk-Si metal–oxide–semiconductor field effect transistors (MOSFETs) are fabricated using the catalytic chemical vapor deposition (Cat-CVD) method as an alternative technology to the conventional high-temperature thermal chemical vapor deposition. Particularly, formation of low-resistivity phosphorus (P)-doped poly-Si films is attempted by using Cat-CVD-deposited amorphous silicon (a-Si) films and successive rapid thermal annealing (RTA) of them. Even after RTA processes, neither peeling nor bubbling are observed, since hydrogen contents in Cat-CVD a-Si films can be as low as 1.1%. Both the crystallization and low resistivity of 0.004 Ω·cm are realized by RTA at 1000 °C for only 5 s. It is also revealed that Cat-CVD SiN_x films prepared at 250 °C show excellent oxidation resistance, when the thickness of films is larger than approximately 10 nm for wet O₂ oxidation at 1100 °C. It is found that the thickness required to stop oxygen penetration is equivalent to that for thermal CVD SiN_x prepared at 750 °C. Finally, complementary MOSFETs (CMOSs) of single-crystalline Si were fabricated by using Cat-CVD poly-Si for gate electrodes and SiN_x films for masks of local oxidation of silicon (LOCOS). At 3.3 V operation, less than 1.0 pA μm⁻¹ of OFF leakage current and ON/OFF ratio of 10⁷–10⁸ are realized, i.e. the devices can operate similarly to conventional thermal CVD process.     

Antiarrhythmic effect related to the plasma concentration of pentisomide in vivo and the antiarrhythmic-concentration relationship in vitro

Pentisomide, 2-(2-diisopropylaminoethyl)-4-methyl-2-(pyridyl)- pentanamide, is a novel antiarrhythmic agent structurally related to disopyramide. Using a glass bead arrhythmic model, the authors studied the antiarrhythmic effect of pentisomide in dogs by monitoring the plasma concentrations. When pentisomide was infused at 1 mg/kg/min for 20 min, the ventricular tachycardia was significantly reduced at 5 min after starting the infusion; the arrhythmias were reduced to less than 5% at the end of the 20 min infusion. The plasma-free concentration of pentisomide was about 3 micrograms/ml at 5 min; it increased to about 10 micrograms/ml at the end of 20 min infusion. With 0.3 mg/kg/min infusion, the arrhythmias were reduced to about 60% but were not significant at 20 min of infusion. The plasma-free concentration of pentisomide did not reach 3 micrograms/ml until 20 min of infusion. The 3 micrograms/ml plasma-free concentration for pentisomide seems to be a critical concentration in inducing a significant antiarrhythmic effect. Pentisomide dose-dependently inhibited ischaemia-reperfusion arrhythmia at doses of 30 microM and higher concentrations in vitro. In conclusion, pentisomide inhibits arrhythmias dependent with the plasma concentration or with the concentration of the external solution. The critical plasma-free concentration for inhibition of arrhythmias was 3 micrograms/ml (not equal to 10 microM) and the in vitro effect also had a similar concentration. Therefore, the in vivo and in vitro antiarrhythmic concentrations were well correlated.     

Characterization of electrodeposited WO3 films and its application to electrochemical wastewater treatment

WO₃ films have been prepared on to IrO₂-coated Ti substrate by cathodic deposition, and as-deposited and annealed films have been characterized using XRD, TEM, Raman and FT-IR spectroscopy. The as-deposited film consists of nanocrystalline, orthorhombic WO₃·H₂O and this phase transforms to amorphous WO₃ by annealing at 250 °C and to monoclinic WO₃ by annealing at and above 350 °C. The as-deposited and annealed films have been used as anodes for electrochemical decomposition of phenol in aqueous solutions with and without chloride ions. The monoclinic WO₃ anodes prepared by annealing at 350 and 400 °C show relatively high electrochemical activity in the chloride-containing solution. In addition, the anodes possess high chemical and physical stabilities: very low dissolution rate of WO₃ during the electrolysis and good adhesion to the substrate. Thus, WO₃ anodes may be promising materials for anodic oxidation of bio-refractory organics in wastewater, although further improvement of electrochemical activity is needed for more effective decrease in total organic carbons in wastewater.     

Mechanism of electrodeposition of copper from cupric pyrophosphate solutions

Cathodic polarization curves were measured for copper in cupric pyrophosphate solutions of different concentrations and temperatures. A rotating disc electrode was used to eliminate concentration polarization. For all solutions, two potential regions are distinguishable in the polarization curve; one is less negative than a critical potential E_b around ?0.75 V vs sce (Region I) and the other more negative than E_b (Region II). A weak adsorption of pyrophosphate ions and hence some inhibition of the electrodeposition of copper is expected for Region I but there is no adsorption in Region II. The exchange current density i_o for the copper deposition was obtained by extrapolating the Tafel relation observed in Region II to the rest potential corresponding to the equilibrium potential. The following reaction mechanisms are proposed to explain the dependence of i_o on the concentration of Cu(P₂O₇)^6?₂ and P₂O^4?₇ ions.

Apparent activation energies are estimated to be about 11 kcal/mol in both cases.     

Phase separation behavior and morphology development of phenolic resin/PMMA/hexamethylenetetrarnine blends

Summary In order to obtain materials with nanopores which will be applicable for many fields, the structures of the cured blends of phenolic resin (PhN), poly(methyl methacrylate) (PMMA) and curing agent were studied. After PMMA was extracted from cured blends, the structures of cured phenolic resins were observed with SEM. As a results, it was found that nanosized continuous pore structures were formed in extremely wide composition region if curing temperature was high.     

Closed-form forward kinematics solutions of a 4-DOF parallel robot

It is well known that the forward kinematics of parallel robots is a very difficult problem. Closed-form forward kinematics solutions have been reported only to a few special classes of parallel robots. This paper presents closed-form forward kinematics solutions of a 4-DOF parallel robot H4. A 16th order polynomial in a single variable is derived to solve the forward kinematics of the H4. The 16 roots of the polynomial lead to at most 16 different forward kinematics solutions. A numerical verification is also presented.     

Observation of three-dimensional elemental distributions of a Si device using a 360 degrees -tilt FIB and the cold field-emission STEM system

A technique for preparation of a pillar-shaped specimen and its multidirectional observation using a combination of a scanning transmission electron microscope (STEM) and a focused ion beam (FIB) instrument has been developed. The system employs an FIB/STEM compatible holder with a specially designed tilt mechanism, which allows the specimen to be tilted through 360 degrees [T. Yaguchi, M. Konno, T. Kamino, T. Hashimoto, T. Ohnishi, K. Umemura, K. Asayama, Microsc. Microanal. 9 (Suppl. 2) (2003) 118; T. Yaguchi, M. Konno, T. Kamino, T. Hashimoto, T. Ohnishi, M. Watanabe, Microsc. Microanal. 10 (Suppl. 2) (2004) 1030]. This technique was applied to obtain the three-dimensional (3D) elemental distributions around a contact plug of a Si device used in a 90-nm technology. A specimen containing only one contact plug was prepared in the shape of a pillar with a diameter of 200nm and a length of 5mum. Elemental maps were obtained from the pillar specimen using a 200-kV cold-field emission gun (FEG) STEM model HD-2300C equipped with the EDAX genesis X-ray energy-dispersive spectrometry (XEDS) system through a spectrum imaging technique. In this study, elemental distributions of minor elements with weak signals were enhanced by applying principal component analysis (PCA), which is a superior technique to extract weak signals from a large dataset. The distributions of elements, especially the metallization component Ti and minor dopant As in this particular device, were successfully extracted by PCA. Finally, the 3D elemental distributions around the contact plug could be visualized by reconstruction from the tilt series of maps.     

Enzyme structure with two catalytic sites for double-sieve selection of substrate

High-fidelity transfers of genetic information in the central dogma can be achieved by a reaction called editing. The crystal structure of an enzyme with editing activity in translation is presented here at 2.5 angstroms resolution. The enzyme, isoleucyl-transfer RNA synthetase, activates not only the cognate substrate L-isoleucine but also the minimally distinct L-valine in the first, aminoacylation step. Then, in a second, "editing" step, the synthetase itself rapidly hydrolyzes only the valylated products. For this two-step substrate selection, a "double-sieve" mechanism has already been proposed. The present crystal structures of the synthetase in complexes with L-isoleucine and L-valine demonstrate that the first sieve is on the aminoacylation domain containing the Rossmann fold, whereas the second, editing sieve exists on a globular beta-barrel domain that protrudes from the aminoacylation domain.