Quantitative analysis of organochlorine pesticide residues in Chinese drugs

This paper reports the GC determination of 20 organochlorine pesticides in Chinese drugs Flos Ionicerae and Moluodan etc by the present method of Japan for determinaing pesticide residues. The results suggest that except Folium Isatidis, Radix Codonopsis and Sanqi Pian all accord with the for provisions pesticide residues in Japanese foodstuffs.     

A 3-V, 2%-mW multibit current-mode ΣΔ DAC with 100 dBdynamic range

The area ratio of analog to digital for mixed-mode chip has been inversely proportional to the process design rule for a given dynamic range objective, in contradiction to the LSI trend. This paper presents a design approach to realize a high degree of size reduction with process design rules for analog circuitry and a signal processing architecture for digital circuitry. A five-level current-mode ΣΔ digital-to-analog converter (DAC) system reveals full scale total harmonic: distortion plus noise (THD+N) of -90 dB and dynamic-range of 100 dB at 3 V (low power of 22 mW). Analog-area down-scaling can be accomplished by this architecture to be 1.09 mm², using 0.6-μm double-poly double-metal (DPDM) CMOS. For the digital filter, a pipeline instruction sequence with multiplierless architecture also gives small area of 1.98 mm²     

Accelerated neutrophil apoptosis in mice lacking A1-a, a subtype of the bcl-2-related A1 gene

To elucidate the role of A1, a new member of the Bcl-2 family of apoptosis regulators active in hematopoietic cell apoptosis, we established mice lacking A1-a, a subtype of the A1 gene in mice (A1-a-/- mice). Spontaneous apoptosis of peripheral blood neutrophils of A1-a-/- mice was enhanced compared with that of either wild-type mice or heterozygous mutants (A1-a+/- mice). Neutrophil apoptosis inhibition induced by lipopolysaccharide treatment in vitro or transendothelial migration in vivo observed in wild-type mice was abolished in both A1-a-/- and A1-a+/- animals. On the other hand, the extent of tumor necrosis factor alpha-induced acceleration of neutrophil apoptosis did not differ among A1-a-/-, A1-a+/-, and wild-type mice. The descending order of A1 mRNA expression was wild-type, A1-a+/-, and A1-a-/-. Taken together, these results suggest that A1 is involved in inhibition of certain types of neutrophil apoptosis.     

Properties of networks obtained by internal plasticization of epoxy resin with aromatic and aliphatic glycidyl compounds

In order to improve the fracture properties of p, p′-diaminodiphenylmethane-cured epoxy resin, various kinds of aromatic and aliphatic glycidyl compounds were investigated as a modifier at an amount of 30 wt %. Several compounds promoted the fracture toughness. In any glycidyl compounds, however, heat resistance was decreased by the modification. The dynamic mechanical properties of the modified epoxy resins were measured. The crosslinking density ρ was calculated from the theory of rubber elasticity, and the mechanical properties of the resins were discussed in regard to the crosslinking density. Tensile strength was scarcely affected by the crosslinking density. Elongation at break and Izod impact strength increased remarkably with decrease in crosslinking density. The fracture toughness K_Ic- increased with decrease in crosslinking density except at small ρ.     

Numerical simulation of molding-defect formation during resin transfer molding

The present study investigated a numerical simulation of molding-defect formation during resin transfer molding using boundary element method and line dynamics. The proposed method enables to simulate small molding defects by increasing the node for required position during time evolution; thereby, the method computes high-resolution flow front without being affected by the initial mesh geometry. The method was applied to the radial injection RTM with single inlet, and it was confirmed by comparison with theoretical value based on Darcy’s law that the flow advancement was computed with high accuracy. In addition, the method was also applied to the flow advancement for inclusion problem with cylinder, and four-point injection problem. The simulated flow behavior, void formation, and shrinkage agreed with the results in references. Finally, the method was compared with experiments using two-point injection problem. The computed configuration of the flow front and weld line agreed well with the experimental results.     

Band 3 protein: physiology, function and structure

Band 3 protein is a typical polytropic membrane protein and mediates the exchange of the cellular HCO3- with CI- in plasma, which has been known as the "Chloride Shift". Owing to the "Chloride Shift", red blood cells can discriminate the metabolically active cells from inactive cells and deliver oxygen particularly to metabolically active tissues that produce carbon dioxide. Thus, band 3 protein is a sensor for metabolically active tissues and no excess oxygen is supplied to tissues as far as oxygen is delivered by red blood cells. In this chapter, we review the physiological role of the anion exchange mediated by band 3 protein and our work concerning the structure and function relationship in band 3 protein, that, is, affinity labeling of the active center for the anion exchange with pyridoxal phosphate, conformational change during the anion exchange process, examination of fidelity of hydropathy prediction on band 3 protein, and phosphoenolpyruvate transport mediated by band 3 protein and its clinical application.     

Double-action bending for eliminating springback in hat-shaped bending of advanced high-strength steel sheet

The International Journal of Advanced Manufacturing Technology - This paper presents a novel technology called ‘double-action bending (DAB)’ to eliminate springback in hat-shape forming...     

Ferroelectric and Magnetic Properties in Room‐Temperature Multiferroic GaxFe2−xO3 Epitaxial Thin Films

GaFeO₃‐type iron oxide is a promising room‐temperature multiferroic material due to its large magnetization. To expand its usability, controlling the ferroelectric and magnetic properties is crucial. In this study, high‐quality Ga_xFe_2–xO₃ (x = 0–1) epitaxial films are fabricated and their properties are systematically investigated. All films exhibit room‐temperature out‐of‐plane ferroelectricity, showing that the coercive electric field (E_c) decreases monotonically with x. Additionally, the films show in‐plane ferrimagnetism with a Curie temperature (T_C) >350 K at x = 0–0.6. The coercive magnetic field (H_c) decreases with x at x ≤ 0.6, but shows a constant value at x > 0.6, whereas the saturated magnetization (M_s) increases with x at x ≤ 0.6, but decreases with x at x > 0.6. X‐ray magnetic circular dichroism reveals that the large magnetization at x = 0.6 is derived from Fe³⁺ (3d⁵) at octahedral sites. The controllable range of the E_c, H_c, and M_s values at room temperature (400–800 kV cm^?1, 1–8 kOe, and 0.2–0.6 µ_B/f.u.) is very wide and differs from those of well‐known multiferroic BiFeO₃. Furthermore, the Ga_xFe_2?xO₃ films exhibit room‐temperature magnetocapacitance effects, indicating that adjusting T_C near room temperature is useful to achieve large room‐temperature magnetocapacitance behavior.