The polar cluster like behavior in Ti substituted BaZrO3 ceramics

In this paper we report the evolution of the polar cluster like behavior with the incorporation of Ti⁴⁺ ion in BaZrO₃ Ceramics. Dielectric behavior of BaZr_xTi_(1−x)O₃ (x = 1.00, 0.95, 0.90, 0.85) ceramics is studied in the temperature range from 300 to 30 K. Polar cluster like behavior becomes more prominent with the increase in content of Ti⁴⁺ ion. The dielectric relaxation is analyzed by Vogel–Fulcher relation and Arrhenius law. Frequency dependence of dielectric constant and low loss tangent of these materials can be useful for the potential applications at low temperature.     

Pharmacogenetics Biomarkers and Their Specific Role in Neoadjuvant Chemoradiotherapy Treatments: An Exploratory Study on Rectal Cancer Patients

Background: Pathological complete response (pCR) to neoadjuvant chemoradiotherapy (CRT) in locally advanced rectal cancer (LARC) is still ascribed to a minority of patients. A pathway based-approach could highlight the predictive role of germline single nucleotide polymorphisms (SNPs). The primary aim of this study was to define new predictive biomarkers considering treatment specificities. Secondary aim was to determine new potential predictive biomarkers independent from radiotherapy (RT) dosage and cotreatment with oxaliplatin. Methods: Thirty germ-line SNPs in twenty-one genes were selected according to a pathway-based approach. Genetic analyses were performed on 280 LARC patients who underwent fluoropyrimidine-based CRT. The potential predictive role of these SNPs in determining pathological tumor response was tested in Group 1 (94 patients undergoing also oxaliplatin), Group 2 (73 patients treated with high RT dosage), Group 3 (113 patients treated with standard RT dosage), and in the pooled population (280 patients). Results: Nine new predictive biomarkers were identified in the three groups. The most promising one was rs3136228-MSH6 (p = 0.004) arising from Group 3. In the pooled population, rs1801133-MTHFR showed only a trend (p = 0.073). Conclusion: This exploratory study highlighted new potential predictive biomarkers of neoadjuvant CRT and underlined the importance to strictly define treatment peculiarities in pharmacogenetic analyses.     

Diet supplementation with donkey milk upregulates liver mitochondrial uncoupling,reduces energy efficiency and improves antioxidant and antiinflammatory defences in rats

Dietary PUFA, mainly those of the n‐3 family, are known to play essential roles in the maintenance of energy balance and in the reduction of body fat deposition through the upregulation of mitochondrial uncoupling that is the main source of reactive oxygen species. We hypothesized that rat supplementation with raw donkey's milk (DM), characterized by low‐fat content and higher n3:n6 ratio, may affect energy balance, lipid metabolism, and prooxidant status as compared to animals treated with cow's milk. In the present study, the effects of drinking raw DM (for 4 weeks) on energy balance, lipid metabolism, antiinflammatory, and antioxidant/detoxifying defences was compared to that produced by rat intake of an iso‐energetic amount of raw cow's milk. The hypolipidemic effect produced by DM paralleled with the enhanced mitochondrial activity/proton leakage and with the increased activity or expression of mitochondrial markers namely, carnitine palmitoyl transferase and uncoupling protein 2. The association of decreased energy efficiency with reduced proinflammatory signs (TNF‐α and LPS levels) with the significant increase antioxidant (total thiols) and detoxifying enzyme activities (glutathione‐S‐transferase NADH quinone oxidoreductase) in DM‐treated animals, indicated that beneficial effects were attributable, at least in part, to the activation of nuclear factor 2 erythroid‐related factor 2 pathway.     

意大利水泥集团研究大楼

新大楼加强了三角状地块的边界设计,并由技术和行政空间两部分组成。新大楼由地上两层及地下两层组成,其中包括停车场。V形设计将实验室和环绕中央庭院的行政区域分隔开,在户外修建花园,并提供进入地下停车场的入口。在四周地下设置的庭院给位于地下的实验室空间提供了自然光线,同时也为设备空间和车库提供了新鲜的空气。     

Thermo‐responsive polyurethane hydrogels based on poly(ethylene glycol) and poly(caprolactone): Physico‐chemical and mechanical properties

In this work, we present the synthesis and characterization of chemically crosslinked polyurethanes (PU) composed of poly(ethylene glycol) (PEG) and poly(caprolactone) diol (PCL‐diol), as hydrophilic and hydrophobic segments respectively, poly(caprolactone) triol (PCL‐triol), to induce hydrolysable crosslinks, and hexamethylene diisocyanate (HDI). The syntheses were performed at 45 °C, resulting in polyurethanes with different PEG/PCL‐diol/PCL‐triol mass fractions. All the PUs are able to crystallize and their thermal properties depend on the global composition. The water uptake capacities of the PU increase as the PEG amount increases. The water into hydrogels is present in different environments, as bounded, bulk and free water. The PU hydrogels are thermo‐responsive, presenting a negative dependence of the water uptake with the temperature for PEG rich networks, which gradually changes to a positive behavior as the amount of poly(caprolactone) (PCL) segments increases. However, the water uptake capacity changes continuously without an abrupt transition. Scanning electron microscopy (SEM) analyses of the hydrogel morphology after lyophilization revealed a porous structure. Mechanical compression tests revealed that the hydrogels present good resilience and low recovery hysteresis when they are subject to cycles of compression–decompression. In addition, the mechanical properties of the hydrogels varies with the composition and crosslinking density, and therefore with the water uptake capacity. The PU properties can be tuned to fit for different applications, such as biomedical applications. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43573.     

Tribological Behavior of Aluminum Alloy AlSi10Mg-TiB<Subscript>2</Subscript> Composites Produced by Direct Metal Laser Sintering (DMLS)

Direct metal laser sintering (DMLS) is an additive manufacturing technique for the production of parts with complex geometry and it is especially appropriate for structural applications in aircraft and automotive industries. Aluminum-based metal matrix composites (MMCs) are promising materials for these applications because they are lightweight, ductile, and have a good strength-to-weight ratio This paper presents an investigation of microstructure, hardness, and tribological properties of AlSi10Mg alloy and AlSi10Mg alloy/TiB₂ composites prepared by DMLS. MMCs were realized with two different compositions: 10% wt. of microsize TiB₂, 1% wt. of nanosize TiB₂. Wear tests were performed using a pin-on-disk apparatus on the prepared samples. Performances of AlSi10Mg samples manufactured by DMLS were also compared with the results obtained on AlSi10Mg alloy samples made by casting. It was found that the composites displayed a lower coefficient of friction (COF), but in the case of microsize TiB₂ reinforcement the wear rate was higher than with nanosize reinforcements and aluminum alloy without reinforcement. AlSi10Mg obtained by DMLS showed a higher COF than AlSi10Mg obtained by casting, but the wear rate was higher in the latter case.     

Influence of copigment derived from Tasmannia pepper leaf on Davidson's plum anthocyanins

Davidson's plum (Davidsonia pruriens, F. Muell.), a native to Australian rainforests, large, crimson-red fruit, which superficially resembles plum, has been commercially cultivated in Australia since 1990s. The current production volume exceeds market demands therefore this study was designed to evaluate the suitability of Davidson's plum extract as a source of anthocyanin-based food colorant. The stability of the Davidson's plum extract towards heat treatment at 95 °C was higher than that of commercial mulberry colorant, but inferior to colorants derived from red cabbage and purple sweetpotato. An addition of a variety of phenolic acids significantly increased color intensity indicating the formation of copigmentation complexes. Commercial chlorogenic acid as well as extract from a native Australian herb rich in chlorogenic acid, Tasmannia pepper leaf (Tasmannia lanceolata, R. Br.), were both tested in model soft drink solutions subjected to light irradiation and heat treatment. In both cases, the addition of the copigment resulted in a lasting increase in color intensity. In conclusion, Davidson's plum extract can successfully be utilized as a source of natural food color. Extract from Tasmania pepper leaf can be used as a co-pigment for Davidson's plum anthocyanins. PRACTICAL APPLICATION: The color properties of an anthocyanin colorant derived from the native Australian fruit Davidson's plum are comparable to those of mulberry, which is currently applied as a food colorant in Australian food products. Utilization of Davidson's plum fruit as a source of natural color will allow the industry to increase the range of natural pigments and will create new opportunities for the emerging native food industry.     

Multi-objective Topology Optimization of Thermo-mechanical Compliant Mechanisms

The material characteristics of a structure will change with temperature variation,and will induce stress within the structure.Currently,the optimal design for the topology of compliant mechanisms is mainly performed in single physical field.However,when compliant mechanisms work in high temperature environments,their displacement outputs are generated not only by mechanical load,but also by the temperature variation which may become the prominent factor.Therefore,the influence of temperature must be considered in the design.In this paper,a novel optimization method for multi-objective topology of thermo-mechanical compliant mechanisms is presented.First,the thermal field is analyzed with finite-element method,where the thermal strain is taken into account in the constitutive relation,and the equivalent nodal thermal load is derived with the principle of virtual work.Then the thermal load is converted into physical loads in elastic field,and the control equation of the thermo-mechanical compliant mechanism is obtained.Second,the mathematical model of the multi-objective topology optimization is built by incorporating both the flexibility and stiffness.Meanwhile,the coupling sensitivity function and the sensitivity analysis equations of thermal steady-state response are derived.Finally,optimality criteria algorithm is employed to obtain numerical solution of the multi-objective topology optimization.Numerical examples show that the compliant mechanisms have better performance and are more applicable if the temperature effect is taken into account in the design process.The presented modeling and analysis methods provide a new idea and an effective approach to topology optimization of compliant mechanisms in electrothermic coupling field and multiphysics fields.     

Improved Markov model for Rayleigh fading envelope

An improved Markov model for Rayleigh fading is proposed. Such a system considers both the amplitude and the speed of the fading envelope which jointly represent the Markov state. By properly selecting the state space size, proper fitting between the proposed system and Jakes' Rayleigh fading simulator has been obtained. Further simulations, using a simple Go back N protocol, confirm the good throughput match between Jakes' and the proposed Markov generators, not obtainable with classic one-dimensional models     

Security of public-key cryptosystems based on Chebyshev polynomials

Chebyshev polynomials have been recently proposed for designing public-key systems. Indeed, they enjoy some nice chaotic properties, which seem to be suitable for use in Cryptography. Moreover, they satisfy a semi-group property, which makes possible implementing a trapdoor mechanism. In this paper, we study a public-key cryptosystem based on such polynomials, which provides both encryption and digital signature. The cryptosystem works on real numbers and is quite efficient. Unfortunately, from our analysis, it comes up that it is not secure. We describe an attack which permits to recover the corresponding plaintext from a given ciphertext. The same attack can be applied to produce forgeries if the cryptosystem is used for signing messages. Then, we point out that also other primitives, a Diffie-Hellman like key agreement scheme and an authentication scheme, designed along the same lines of the cryptosystem, are not secure due to the aforementioned attack. We close the paper by discussing the issues and the possibilities of constructing public-key cryptosystems on real numbers.