Modelling of induced aeration in turbine aerators by use of radial basis function neural networks

Gas induction in agitated vessels with turbine impellers can be modelled accurately by means of radial basis function neural nets. The results obtained with the radial basis neural net were significantly better than those obtained by multivariate regression models or standard back propagation neural nets. Moreover, by using the radial basis function neural net model, it was possible to conduct a sensitivity analysis of the variables affecting aeration. Increased medium density showed a strong adverse effect, while variation of the viscosity can cause an increase or a decrease in the rate of aeration, depending on the prevailing process conditions.     

Ultrasonic defouling of reverse osmosis membranes used to treat wastewater effluents

On-line ultrasonic cleaning was used to remove fouling from a commercially important polyamide based reverse osmosis membrane during cross-flow filtration of CaSO₄, Fe³⁺ and carboxyl cellulose solutions. In each case, the permeate flux of the membrane increased significantly, with virtually no decrease in rejection in the presence of ultrasonication. Membrane surface characterization via scanning electron microscopy (SEM) confirmed the beneficial effect of ultrasonication on the membrane permeate flux. These studies suggest that ultrasonic defouling may be a very useful approach for the future development of reverse membranes, especially as far as fouling with organic materials is concerned.     

Differencing and merging of architectural views

Differencing and merging architectural views is an important activity in software engineering. However, existing approaches are still based on restrictive assumptions, such as requiring view elements to have unique identifiers or exactly matching types, which is often not the case in many application domains. We propose an approach based on structural information. We generalize a published polynomial-time tree-to-tree correction algorithm that detects inserts, renames and deletes, into a novel algorithm that additionally detects restricted moves. Our algorithm also supports forcing and preventing matches between view elements. We incorporate the algorithm into tools to compare and merge Component-and-Connector (C&C) architectural views. We provide an empirical evaluation of the algorithm. We illustrate the tools using extended examples, and use them to detect and reconcile interesting differences between real architectural views. This article is an expanded version of the following paper: Abi-Antoun, M., Aldrich, J., Nahas, N., Schmerl, B., and Garlan, D: 2006, ‘Differencing and Merging of Architectural Views’. In: Proceedings of the 21st IEEE International Conference on Automated Software Engineering, pp. 47–58.     

Phonon dispersion in He II at long wavelengths and low temperatures

Phonon dispersion in liquid He II at long wavelengths and low temperatures is calculated using a generalized polarization potential approach and shown to yield results in good agreement with both superthermal phonon propagation and neutron scattering experiments at pressures up to 24 bar. It is shown that the long-wavelength dispersion relation is of the form _q =s ₀ q(1+₂ q ²+₃ q ³+...) suggested by Feenberg and by Kemoklidze and Pitaevskii, but that the validity of such an expansion is restricted to wave vectorsq0.1Å ^–1. For larger values ofq, one can force a polynomial fit, containing only odd powers ofq, to the dispersion curve and other parameters of interest, but the number of terms which must be kept is so large as to render such an approach unwieldy.Work supported in part by the National Science Foundation Grant NSF DMR72-03026.     

Histopathologic spectrum of vaginal adenosis and related changes in stilbestrol-exposed females

A total of 98 colposcopically directed biopsies were obtained from the vagina, cervix, and cervicovaginal ridge (hood) of 80 young women believed to have had intrauterine exposure to stilbestrol (DES). Specific investigation of the patient's medical records corroborated the history of maternal stilbestrol administration in 36 patients (45%), while in the remainder the drug history was regarded as presumptive since medical records were unavailable for review. The findings did not differ significantly in those biopsies taken from patients with confirmed or presumptive drug histories. Histologic evidence of vaginal adenosis was detected in vaginal biopsies from 43 patients. In 30 cases (70%) benign Müllerian-type glandular epithelium was in the superficial vaginal wall, residing on the mucosal surface and/or in the lamina propria. The glandular epithelium predominantly was of endocervical type, but in six instances it resembled endometrial or fallopian tubal epithelium. The glands were accompanied by varying degrees of squamous metaplasia in 22 cases. When extensive the metaplasia produced transformation zones similar to those seen in the normal cervix. Vaginal biopsies of adenosis from the other 13 patients (30%) revealed squamous metaplasia without demonstrable glands due to complete transformation of all antecedent glandular epithelium by squamous metaplasia. Our studies indicate that squamous metaplasia is a component of major importance in the natural history of adenosis and that the concept of adenosis should be broadened to include those examples comprised exclusively of metaplastic epithelium. In such examples metaplasia is identified by the immaturity and poor glycogenation of the squamous cells and their accompanying squamous pegs which often contain residual gland openings or squamous "eddies." Similar findings were present in biopsies of seven cervicovaginal ridges and in cervical biopsies from 37 patients, except for the absence of endometrial or tubal type glands in the latter site. Although no adenocarcinomas were detected, six patients had squamous dysplasia of the vagina and/or cervix. In no case were premalignant or dysplastic changes of glandular cells found. Our findings support the thesis that stilbestrol-associated adenosis represents anomalous embryologic localization of the original squamocolumnar junction in the vagina rather than in the cervix. It is closely related to so-called cervical "erosions." The development of squamous metaplasia accounts for modifications in the clinical and histologic appearances by producing transformation zones which then may be subject to the same oncogenic stimuli for squamous neoplasia as are their counterparts in the cervix.     

Power to the people or regulatory ratcheting? Explaining the success (or failure) of attempts to site commercial US nuclear power plants: 1954–1996

Between 1954 and 1996, more than 200 nuclear power projects were publicly announced in the USA. Barely half of these projects were completed and generated power commercially. Existing research has highlighted a number of potential explanations for the varying siting outcomes of these projects, including contentious political protests, socioeconomic and political conditions within potential host communities, regulatory changes (‘ratcheting’), and cost overruns. However, questions remain about which of these factors, if any, had an impact on these outcomes. This article uses a new data set of 228 host communities where siting was attempted to illuminate the factors that led projects towards either completion or cancelation. Controlling for factors highlighted by past studies, we find that regulatory, site‐ and reactor‐specific factors predict the outcomes of attempts to site nuclear reactors over this time period. These findings have important implications in the post‐Fukushima ‘nuclear renaissance’ era when many still hope to revitalize the nuclear industry in the USA. Copyright © 2016 John Wiley & Sons, Ltd.     

Acidified sodium chlorite antimicrobial treatment of broiler carcasses

An acidified sodium chlorite (ASC) solution was investigated for its antimicrobial effects on broiler carcasses processed under conditions similar to those used in U.S. commercial poultry facilities. Of particular interest was the ability of the ASC solution to reduce natural bioburden in a prechill procedure. A number of parameters such as pretreatment washing of carcasses with water (no wash versus water wash), ASC concentration (500, 850, and 1,200 ppm), method of application (spray versus dip), and method of acid activation (phosphoric acid versus citric acid) were explored to evaluate disinfection conditions. ASC dip solutions (18.9 liters) were freshly prepared for groups of five prechill eviscerated carcasses per treatment (n = 10 carcasses). ASC treatment was shown to be an effective method for significantly reducing naturally occurring microbial contamination on carcasses. Reductions following immersion dipping were demonstrated at all disinfectant concentrations for total aerobes (82.9 to 90.7%), Escherichia coli (99.4 to 99.6%), and total coliforms (86.1 to 98.5%). Additionally, testing showed that ASC solutions maintained stable pH and minimal chlorite ion concentration deviations throughout each treatment. The results of the parameter evaluations indicated that maximal antimicrobial activity was achieved in carcasses that were prewashed and then exposed to a 5-s dip in a solution containing phosphoric acid- or citric acid-activated ASC. At 1,200 ppm ASC, a mild but transitory whitening of the skin was noted on dipped carcasses. The results support the methods currently approved by the U.S. Department of Agriculture for the use of ASC solutions as a prechill antimicrobial intervention in U.S. poultry processing plants.     

The grain size dependence of the yield,flow and fracture stress of commercial purity silver

Heavily cold-rolled sheet material of 99.9 pct purity Ag has been recrystallized at varying temperatures to give average grain diameters,l, in the range between 1 and 60 μ. For this material, the yield stress, flow stress at several strain values, and fracture stress follow the Hall-Petch relation: $$\sigma _\varepsilon = \sigma o_\varepsilon + k_\varepsilon l^{ - 1/2} $$ whereσ _ε is the flow stress at a particular value of strain, ε, ands _{o ε} andk _ε are the experimental constants appropriate to a particular strain value. The range in grain size obtained for this material was sufficiently large to determine that silver can be appreciably strengthened by grain size refinement and that several other relations previously suggested to relate the stress and grain size could be discounted. The finest grain sizes were measured from replicas of etched specimens as viewed with the electron microscope. It is proposed that this type of grain size strengthening may be responsible for the exceptional strength which occurs in certain films of silver fabricated by vapor deposition techniques.     

Linguistic and location effects in compliance with pesticide warning labels for amateur and professional users

Three studies explored amateur and professional users' compliance with pesticide warning labels. Professionals were classified as people working in a profession in which the use of pesticides is a necessary part of their job. Amateurs used pesticides only in their leisure time. The first study showed that the wording used affected perception of the appropriateness of hazard statements, one of the most effective variations being the use of the personal pronoun (statements beginning "You should..."). The location of warning information was also found to affect actual compliance: Compliance increased when warning information was presented in the directions for use section. A supplemental directive increased compliance only for professional users. In a final study, "best-case" and "worst-case" linguistic variations were combined with best-case and worst-case locations for safety information. Instruction statements using the personal pronoun and presented in the directions for use section resulted in the highest levels of compliance. The differences in compliance between amateur and professional users are interpreted within the framework of Rasmussen's (1986) distinction among skill-, rule-, and knowledge-based behavior. Actual or potential applications of this research include the design of warning labels and safety information.