Reliability of railway traffic personnel

The paper describes an analysis of reliability of railway traffic personnel. The human tasks critical to system safety are identified. Human error probability is chosen as a measure of human reliability in performing these tasks. The probabilities of some critical errors are estimated using the field data collected in the Slovenian railway traffic system. As stress conditions strongly affect the human performance, a simple model of the dependence of human error probability on stress levels is proposed.     

Fast Recognition of Fibonacci Cubes

Fibonacci cubes are induced subgraphs of hypercubes based on Fibonacci strings. They were introduced to represent interconnection networks as an alternative to the hypercube networks. We derive a characterization of Fibonacci cubes founded on the concept of resonance graphs. The characterization is the basis for an algorithm which recognizes these graphs in O(mlog n) time. A. Vesel supported by the Ministry of Science of Slovenia under the grant 0101-P-297.     

Online bin stretching with three bins

Online bin stretching is a semi-online variant of bin packing in which the algorithm has to use the same number of bins as an optimal packing, but is allowed to slightly overpack the bins. The goal is to minimize the amount of overpacking, i.e., the maximum size packed into any bin. We give an algorithm for online bin stretching with a stretching factor of \(11/8 = 1.375\) for three bins. Additionally, we present a lower bound of \(45/33 = 1.\overline{36}\) for online bin stretching on three bins and a lower bound of 19/14 for four and five bins that were discovered using a computer search.     

Development of a solid self-microemulsifying drug delivery system (SMEDDS) for solubility enhancement of naproxen

Context: Comparative evaluation of liquid and solid self-microemulsifying drug delivery systems (SMEDDS) as promising approaches for solubility enhancement.

Objective: The aim of this work was to develop, characterize, and evaluate a solid SMEDDS prepared via spray-drying of a liquid SMEDDS based on Gelucire® 44/14 to improve the solubility and dissolution rate of naproxen.

Material and methods: Various oils and co-surfactants in combination with Gelucire® 44/14 were evaluated during excipient selection study, solubility testing, and construction of (pseudo)ternary diagrams. The selected system was further evaluated for naproxen solubility, self-microemulsification ability, and in vitro dissolution of naproxen. In addition, its transformation into a solid SMEDDS by spray-drying using maltodextrin as a solid carrier was performed. Scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and X-ray diffraction (XRD) were used to evaluate the physical characteristics of the solid SMEDDS obtained.

Results: The selected formulation of SMEDDS was comprised of Miglyol 812®, Peceol?, Gelucire® 44/14, and Solutol® HS 15. The liquid and solid SMEDDS formed a microemulsion after dilution with comparable average droplet size and exhibited uniform droplet size distribution. In the solid SMEDDS, liquid SMEDDS was adsorbed onto the surface of maltodextrin and formed smooth granular particles with the encapsulated drug predominantly in a dissolved state and partially in an amorphous state. Overall, incorporation of naproxen in SMEDDS, either liquid or solid, resulted in improved solubility and dissolution rate compared to pure naproxen.

Conclusion: This study indicates that a liquid and solid SMEDDS is a strategy for solubility enhancement in the future development of orally delivered dosage forms.     

Determination of biogenic amines in cheese by ion exchange chromatography

A sensitive, fully automated method, yielding reproducible results, was developed for the determination of relevant biogenic amines in cheese. Histamine, tyramine, putrescine, cadaverine, tryptamine, agmatine, spermidine and spermine were separated in the ion exchanger of OSTION LG ANB column of the automatic amino acid analyser Mikrotechna 339 T. Elution was carried out at 60 degrees C using a system of two buffers. The samples were extracted and precipitated by trichloroacetic acid and purified, after removal of fat, by membrane filtration. The recovery for individual amines in cheese ranged between 86% and 108%. The detection limit was of 1-5 mg of the respective amine per 1 kg of cheese and the method was linear within the dose range of 0.1-10 micrograms (for tryptamine 0.5-10 micrograms).     

Characterization of steel mill electric-arc furnace dust

In order to make a complete characterization of electric-arc furnace (EAF) dust, as hazardous industrial waste, and to solve its permanent disposal and/or recovery, bearing in mind both the volumes formed in the Croatian steel industry and experiences of developed industrial countries, a study of its properties was undertaken. For this purpose, samples of EAF dust, taken from the regular production process in the Zeljezara Sisak Steel Mill between December 2000 and December 2001, were subjected to a series of tests. The chemical composition of EAF dust samples was investigated by means of a several different analytical methods. The results from the chemical analysis show that the approximate order of abundance of major elements in EAF dusts is as follows: Fe, Zn, Mn, Ca, Mg, Si, Pb, S, Cr, Cu, Al, C, Ni, Cd, As and Hg. Granular-metric composition of single samples was determined by applying sieve separation. Scanning electron micro-structural examination of EAF dust microstructure was performed and results indicated that all twelve EAF dusts were composed of solid spherical agglomerates with Fe, Zn, Pb, O, Si and Ca as the principal element. The investigation of grain morphology and the mineralogical composition of EAF dust were taken by combination of high resolution Auger electron spectroscopy (HR AES), X-ray photoelectron spectroscopy (XPS) and X-ray powder diffraction analysis. The analysis of XPS-spectra determined the presence of zinc in the form of ZnO phase and the presence of lead in the form of PbO phase, i.e. PbSO3/PbSO4 forms. The results of the X-ray diffraction phase analysis show that the basis of the examined EAF dust samples is made of a mixture of metal oxides, silicates and sulphates. The metal concentration, anions, pH value and conductivity in water eluates was determined in order to define the influence of EAF dust on the environment.     

Binary coding of Kekulé structures of catacondensed benzenoid hydrocarbons

An algorithm is described by means of which the Kekulé structures of a catacondensed benzenoid molecule (with h hexagons) are transformed into binary codes (of length h). By this, computer-aided manipulations with, and memory-storage of Kekulé structures are much facilitated. Any Kekulé structure can easily be recovered from its binary code.     

AES investigation of the stainless steel surface oxidized in plasma

Auger electron spectroscopy (AES) depth profiling was used to study the oxidation phenomena of AISI316L stainless steel during treatment with oxygen plasma. Samples were exposed to low-pressure RF plasma with a high dissociation degree, so that the flux of oxygen atoms onto the sample surface exceeded 10²⁴ m⁻² s⁻¹. A set of samples was oxidized 4 min at different temperatures up to 1300 K during plasma treatment. AES measurements showed that the oxide film thickness increased with the increasing temperature. The thickness of the oxide film on the samples oxidized in plasma at 300 K was nearly the same as for the untreated sample. The thickness of the oxide film of the samples which were oxidized at 1000 K was about 170 nm and it consisted of iron oxide. The thickest oxide film of about 350 nm was found on the samples heated in oxygen plasma to 1300 K. Depth profiling showed the uppermost layer of manganese oxide, followed by a mixture of chromium oxide and iron oxide. The scanning electron microscope analyses showed a dramatic increase of the surface roughness.     

New system theory and its impact on control theory

Real systems can include two types of state variables – dynamic and static. While dynamic state variables are a common part of each system, static variables are not and their presence in a system may cause some problems if standard system theories are used. In this paper, it is shown that, due to a new system theory (NST), it is possible to work correctly with systems and subsystems which include not only dynamic state variables, but also static state variables. If standard system theories are used, static variables in the real system cause not only problems in describing systems but also some challenges in control theory. These challenges involve, for example, some questions of controllability, reachability, or observability of a plant that includes static variables or the optimal control design of a plant that includes statical state variables. Some of the challenges mentioned are addressed in this paper after a brief introduction of the NST.