The impacts of a GTL plant on Brazil's oil products supply and refinery expansion

This paper assesses the impacts of a GTL plant on the expansion of Brazil's oil refining segment. The GTL plant (50,000 bpd) was sized to start up operations in 2015, producing diesel and naphtha through the indirect route (FT-synthesis). This plant will consume the non-associated natural gas production from the recent discoveries at the Santos Basin (around 419 Bm³), and the associated gas production from the Campos Basin. Both basins are located in the Southeast of Brazil, the most populated, rich and industrialized region of the country. Two different criteria for refinery expansion were simulated in order to meet oil product demand scenarios. Findings show that depending on the refinery expansion criteria considered GTL will play a fundamental hole to meet the oil product demand forecast to Brazil in the next 10 years.     

Various Scale Levels of the Gel-to-Glass Transformation

The gel-to-glass transition in SiO₂ xerogels prepared by inorganic sol-gel synthesis was studied. The evolution of the molecular structure is traced using the infrared and lowfrequency Raman spectroscopy methods. The elastic moduli of the samples as well as the pore wall moduli at various stages of heat treatment are determined from the data on Brillouin scattering. The formation of monolithic glass on the macroscopic level manifests itself within a narrow temperature range by the dramatic increase of Young's modulus to the accepted value for fused silica. This phenomenon coincides with structural transformations on the molecular scale: (i) the definite correlation radius (the long-range order sphere) appears; (ii) local distortions of the silica network relax. The presence of structural defects influences the kinetics of vitreous SiO₂ formation during xerogel heat treatment.     

Unified reliability estimation and management of NoC based chip multiprocessors

We present a new architecture level unified reliability evaluation methodology for chip multiprocessors (CMPs). The proposed reliability estimation (REST) is based on a Monte Carlo algorithm. What distinguishes REST from the previous work is that both the computational and communication components are considered in a unified manner to compute the reliability of the CMP. We utilize REST tool to develop a new dynamic reliability management (DRM) scheme to address time-dependent dielectric breakdown and negative-bias temperature instability aging mechanisms in network-on-chip (NoC) based CMPs. Designed as a control loop, the proposed DRM scheme uses an effective neural network based reliability estimation module. The neural-network predictor is trained using the REST tool. We investigate how system’s lifetime changes when the NoC as the communication unit of the CMP is considered or not during the reliability evaluation process and find that differences can be as high as 60%. Full-system based simulations using a customized GEM5 simulator show that reliability can be improved by up to 52% using the proposed DRM scheme in a best-effort scenario with 2–9% performance penalty (using a user set target lifetime of 7 years) over the case when no DRM is employed.     

Search intensity versus search diversity: a false trade off?

An implicit tenet of modern search heuristics is that there is a mutually exclusive balance between two desirable goals: search diversity (or distribution), i.e., search through a maximum number of distinct areas, and, search intensity, i.e., a maximum search exploitation within each specific area. We claim that the hypothesis that these goals are mutually exclusive is false in parallel systems. We argue that it is possible to devise methods that exhibit high search intensity and high search diversity during the whole algorithmic execution. It is considered how distance metrics, i.e., functions for measuring diversity (given by the minimum number of local search steps between two solutions) and coordination policies, i.e., mechanisms for directing and redirecting search processes based on the information acquired by the distance metrics, can be used together to integrate a framework for the development of advanced collective search methods that present such desiderata of search intensity and search diversity under simultaneous coexistence. The presented model also avoids the undesirable occurrence of a problem we refer to as the ‘ergometric bike phenomenon’. Finally, this work is one of the very few analysis accomplished on a level of meta-meta-heuristics, because all arguments are independent of specific problems handled (such as scheduling, planning, etc.), of specific solution methods (such as genetic algorithms, simulated annealing, tabu search, etc.) and of specific neighborhood or genetic operators (2-opt, crossover, etc.).     

Étude de la précision de l’estimation de la densité spectrale de puissance croisée,obtenue par transformation de fourier de la fonction de corrélation

The authors compare two different estimators of the crosscorrelation function and show that they give equivalent estimators in the frequency domain. They calculate the first and second order moments of the estimator of the cross-spectral-density (DSPC)due to the statistical errors and the quantification of inputs. From these general formulas, they perform numerical calculations for a particular case and they compare them to practical measurements. They show the interesting fact, that the variance of the statistical errors on the dspc is inferior by estimating its phase than by estimating its module. Furthermore, the quantification of the inputs may influence the variance of the phase of the DSPC estimated.     

Environmental Fatigue and Static Behavior of RC Beams Strengthened with Carbon-Fiber-Reinforced Polymer

Many countries around the world have tremendous needs to repair and strengthen their transportation infrastructure. Almost everywhere, traffic loads have reached levels largely exceeding design expectations. Northern countries also experience severe winter conditions that are combined with an extensive use of deicing salts and accelerate structural deterioration. In Canada, the extent of deterioration has prompted many authorities, including the federal and provincial governments, to investigate the potential use of fiber-reinforced polymer products to extend the life of their existing structures. However, it is widely recognized that the large-scale implementation of these products is often impaired by the lack of data on their durability. This paper presents an experimental project undertaken in order to assess the durability of reinforced concrete beams externally strengthened with two types of carbon-fiber-reinforced polymer (CFRP). The beams were first exposed to either wet-dry cycles or continuous immersion in water and then were loaded in fatigue. Finally, they were tested quasi-statically under four-point bending up to failure. The test results presented here provide some insights on the potential long-term performance of CFRP-strengthened beams exposed to severe environmental conditions.     

Riverbed: a novel user-steered image segmentation method based on optimum boundary tracking

This paper presents an optimum user-steered boundary tracking approach for image segmentation, which simulates the behavior of water flowing through a riverbed. The riverbed approach was devised using the image foresting transform with a never-exploited connectivity function. We analyze its properties in the derived image graphs and discuss its theoretical relation with other popular methods such as live wire and graph cuts. Several experiments show that riverbed can significantly reduce the number of user interactions (anchor points), as compared to live wire for objects with complex shapes. This paper also includes a discussion about how to combine different methods in order to take advantage of their complementary strengths.     

The PANOPTIC Camera: A Plenoptic Sensor with Real-Time Omnidirectional Capability

A new biologically-inspired vision sensor made of one hundred “eyes” is presented, which is suitable for real-time acquisition and processing of 3-D image sequences. This device, named the Panoptic camera, consists of a layered arrangement of approximately 100 classical CMOS imagers, distributed over a hemisphere of 13 cm in diameter. The Panoptic camera is a polydioptric system where all imagers have their own vision of the world, each with a distinct focal point, which is a specific feature of the Panoptic system. This enables 3-D information recording such as omnidirectional stereoscopy or depth estimation, applying specific signal processing. The algorithms dictating the image reconstruction of an omnidirectional observer located at any point inside the hemisphere are presented. A hardware architecture which has the capability of handling these algorithms, and the flexibility to support additional image processing in real time, has been developed as a two-layer system based on FPGAs. The detail of the hardware architecture, its internal blocks, the mapping of the algorithms onto the latter elements, and the device calibration procedure are presented, along with imaging results.