Manganese ferrite-polyaniline hybrid materials: Electrical and magnetic properties

Magnetic MnFe₂O₄ nanopowders were synthesized by an original solvothermal method in the absence and in the presence of tetra-n-butylammonium bromide (TBAB) and Tween 80 (TW) as surfactants. Manganese ferrite/polyaniline (PANI) hybrid materials were synthesized by in situ polymerization of aniline on the surface of MnFe₂O₄ using ammonium persulfate as oxidant. The purpose of the study was to investigate the influence of the two surfactants on the properties of the MnFe₂O₄ powders and of their composites with PANI. The specific surface area, the cumulative surface area of pores and the cumulative volume of pores are influenced by the nature of surfactant in case of MnFe₂O₄ powders and are higher by comparison to those of the MnFe₂O₄/PANI hybrid materials. The values of saturation magnetization in case of MnFe₂O₄ powders are higher than those of the hybrid materials and are not influenced by the surfactant nature. These features revealed that MnFe₂O₄ powders can be efficiently used as adsorbents for the purification of wastewaters. The values of the electrical conductivity of the composites exhibit a significant increase in comparison to the MnFe₂O₄ powders and depend on the surfactant nature. The highest value of electrical conductivity was achieved by the composite obtained using Tween 80 as surfactant (σ_DC = 54.5·10^?5S?m^?1) which was close to that of PANI (σ_DC = 61.2·10^?5 S?m^?1). The fact that the magnetic and electric properties of the synthesized MnFe₂O₄/PANI composites can be changed by design, demonstrate the high potential of these materials to be used in magneto-electric applications.     

Measurement of the working parameters of an air-post vertical-cavity surface-emitting laser

We present a complete experimental evaluation of the effective parameters necessary to describe the dynamical behavior of an air-post vertical-cavity surface-emitting lasers, on the basis of theoretical equations which are also derived in this paper. The experimental investigation is composed of several steps, including power versus current measurement, noise spectrum analysis, linewidth evaluation. The complete set of parameters derived, in particular the linewidth-enhancement factor and the spontaneous emission factor, is particularly important for accurate comparisons of theoretical models on the laser dynamics with experiments.     

Utilization of chopped and long alfalfa by dairy heifers

Two physical forms of alfalfa hay, chopped and long, were fed at maintenance and for ad libitum consumption to dairy heifers to determine effects upon digestibility and energy utilization. Ad libitum intake was associated with lower digestibility of dry matter (56 versus 58%), neutral detergent fiber (45 versus 58%), and acid detergent fiber (45 versus 52%). Energy balance was 1.77 Mcal/day at ad libitum versus .08 Mcal/day at maintenance. Dry matter intake was similar for chopped (5.4 kg/day) versus long alfalfa (5.5 kg/day). Digestibilities of dry matter, neutral detergent fiber, acid detergent fiber, and cellulose were 7 to 10 percentage units lower when heifers were fed the chopped alfalfa. Metabolizable energy intake generally reflected digestible energy intake, which was about 2 Mcal/day less for heifers consuming chopped alfalfa. Heat production was similar for the two physical forms. Consequently, heifers consuming chopped alfalfa had lower energy balance. Reducing particle size of the alfalfa resulted in lower dry matter and energy digestibility, presumably because of increased rate of passage. Increased intake to compensate for depressed energy utilization of the chopped alfalfa did not occur; effects upon animal gain could not be assessed.     

Eigenschaften von binären mischungen aus polyethylenen hoher dichte mit ultrahoher und normaler molmasse

The study is on two component blends of high density polyethylenes, having normal and ultra-high molecular weight. The polyethylenes were homogenized by two routes: in powder state or by rolling in melt, then pressed at temperatures in the range from 140°C to 220°C. Comparative studies showed that the way of homogenizing of the components does practically not affect the main mechanical properties of the blends when pressed at temperatures ≥ 160°C. Of special interest are the characteristics of those systems where ultra-high molecular weight polyethylene is the matrix component.     

Late effects of radiotherapy in children

PURPOSE: To examine benzoporphyrin derivative angiography as a modality for studying photosensitizer biodistribution in experimental choroidal melanomas. METHODS: A liposomal preparation of benzoporphyrin derivative was used in this study. Digital benzoporphyrin derivative angiograms were performed in 10 rabbits (six for experimental choroidal melanomas, two for normal choroids, and two for irides) using a Topcon ImageNet H1024 digital imaging system, a Kodak Megaplus video camera, and a Topcon TRC-50-VT fundus camera. Only one eye from each rabbit was used. Filters specifically designed for benzoporphyrin derivative (peak absorption at 580 nm and peak emission at 695 nm) were used. Benzoporphyrin derivative (1 mg/kg) was injected into an ear vein while images of tumor, normal choroid, or iris were being obtained. Follow-up images were obtained during the first 3 hours and at 24 hours after injection. Fluorescence microscopy was performed in all 10 rabbits using 1 mg/kg of benzoporphyrin derivative. Tumor-bearing eyes were enucleated at the same time points that angiograms were performed, and the two sets of results were compared for maximum dye accumulation. RESULTS: Digital angiography demonstrated that maximal benzoporphyrin derivative fluorescence occurred in tumors 15 to 45 minutes after injection. Fluorescence photometry corroborated these results. CONCLUSION: Photosensitizer angiography is a valid modality for determining the optimum treatment time for photodynamic therapy.     

Turbulent Details Simulation for SPH Fluids via Vorticity Refinement

A major issue in smoothed particle hydrodynamics (SPH) approaches is the numerical dissipation during the projection process, especially under coarse discretizations. High‐frequency details, such as turbulence and vortices, are smoothed out, leading to unrealistic results. To address this issue, we introduce a vorticity refinement (VR) solver for SPH fluids with negligible computational overhead. In this method, the numerical dissipation of the vorticity field is recovered by the difference between the theoretical and the actual vorticity, so as to enhance turbulence details. Instead of solving the Biot‐Savart integrals, a stream function, which is easier and more efficient to solve, is used to relate the vorticity field to the velocity field. We obtain turbulence effects of different intensity levels by changing an adjustable parameter. Since the vorticity field is enhanced according to the curl field, our method can not only amplify existing vortices, but also capture additional turbulence. Our VR solver is straightforward to implement and can be easily integrated into existing SPH methods.     

A new approach to predict ulcerative colitis activity through standard clinical–biological parameters using a robust neural network model

Neural Computing and Applications - Colonoscopy is the “gold” standard for evaluating disease activity in ulcerative colitis (UC). An important area of research is finding a...     

Is implementation of continuous improvement possible? An evolutionary model of enablers and inhibitors

The purpose of this article is to present an evolutionary model of the enablers and inhibitors affecting the implementation and sustainability of continuous improvement. With this aim, a qualitative study using the grounded theory was carried out. Interviews were conducted with managers responsible for continuous improvement in first‐tier suppliers in the automotive sector. As a result, two existing lines of research in the continuous improvement literature are synthesized: on one hand, the literature concerning the enablers and barriers associated with continuous improvement sustainability; and on the other, the literature concerning the evolutionary model. © 2011 Wiley Periodicals, Inc.