A Light Weight Secure Communication Scheme for Wireless Sensor Networks

Wireless Personal Communications - The majority of security systems for wireless sensor networks are based on symmetric encryption. The main open issue for these approaches concerns the...     

Cesium salt of a heteropolyacid in nanotubular channels and on the external surface of SBA-15 crystals: preparation and performance as acidic catalysts

The Cs-salt of heteropolyacid with stoichiometry Cs_2.5H_0.5PW₁₂O₄₀ (CsHPW) was deposited selectively at the external surface of the SBA-15 silica microcrystals, inside its mesoporous channels and simultaneously at both location modes. The structure, texture and performance of these CsHPW/SBA-15 composites were compared with that of a reference bulk salt of the same composition. Location of CsHPW salt on the external surface of SBA-15 microcrystals leads to disintegration of its agglomerates increasing acidity of the catalytic phase. A novel preparation strategy consisting of grafting the basic Cs-species at the internal pores surface of SBA-15 stabilized the CsHPW phase inside the channels in form of 5–8 nm nanocrystals at 30–70 wt.% loadings. The catalytic tests demonstrated that insertion of the CsHPW catalytic phase inside the nanotubular channels of SBA-15 in combination with location of an additional amount of this phase at the external surface of SBA-15 microcrystals allows to increase the specific activity of this phase in MTBE synthesis, propionylation of anisole and alkylation of catechol with t-butanol by a factor of 1.5–3. This level of specific activity in combination with high total loading of catalytic phase >60 wt.% permit to get composite catalytic materials with catalytic activity higher by a factor of 1.2–1.5 with respect to the bulk CsHPW catalyst and stabilizing the catalytic phase against colloidization in polar media.     

Extraction of anthocyanins from red cabbage and purification using adsorption

There is an increasing interest in anthocyanins, as natural food colorants, in food products and also in pharmaceutical products due to their antioxidative potential. The present study deals with extraction and purification of anthocyanins from red cabbage. Conventional extraction methods of anthocyanin from plant material are non-selective and yield pigment solutions with large amounts of byproducts such as sugars, organic acids and proteins. Some of these impurities may accelerate anthocyanin degradation. Different extracting media were used and the mixture of 50% (v/v) ethanol and acidified water resulted in maximum anthocyanin content (390.6 mg/L). In order to obtain anthocyanins in a purified form, adsorption was carried out with six different adsorbents. Among these, non-ionic acrylic ester adsorbent, namely Amberlite XAD-7HP, showed the highest adsorption capacity (0.84 mg/mL of resin) and desorption ratio (92.85%). Adsorption results were found to be correlated best using the Langmuir isotherm equation especially at low temperature. The resulting anthocyanin solution after purification was free from sugars, which are the major cause for degradation of anthocyanin. No browning was observed and chroma increased by 27% compared to crude anthocyanin.     

Design and analysis of low power high-speed 1-bit full adder cells for VLSI applications

This paper presents a low power and high speed two hybrid 1-bit full adder cells employing both pass transistor and transmission gate logics. These designs aim to minimise power dissipation and reduce transistor count while at the same time reducing the propagation delay. The proposed full adder circuits utilise 16 and 14 transistors to achieve a compact circuit design. For 1.2 V supply voltage at 0.18-μm CMOS technology, the power consumption is 4.266 μW was found to be extremely low with lower propagation delay 214.65 ps and power-delay product (PDP) of 0.9156 fJ by the deliberate use of CMOS inverters and strong transmission gates. The results of the simulation illustrate the superiority of the newly designed 1-bit adder circuits against the reported conservative adder structures in terms of power, delay, power delay product (PDP) and a transistor count. The implementation of 8-bit ripple carry adder in view of proposed full adders are finally verified and was observed to be working efficiently with only 1.411 ns delay. The performance of the proposed circuits was examined using Mentor Graphics Schematic Composer at 1.2 V single ended supply voltage and the model parameters of a TSMC 0.18-μm CMOS.     

Denoising functional MR images: a comparison of wavelet denoising and Gaussian smoothing

We present a general wavelet-based denoising scheme for functional magnetic resonance imaging (fMRI) data and compare it to Gaussian smoothing, the traditional denoising method used in fMRI analysis. One-dimensional WaveLab thresholding routines were adapted to two-dimensional (2-D) images, and applied to 2-D wavelet coefficients. To test the effect of these methods on the signal-to-noise ratio (SNR), we compared the SNR of 2-D fMRI images before and after denoising, using both Gaussian smoothing and wavelet-based methods. We simulated a fMRI series with a time signal in an active spot, and tested the methods on noisy copies of it. The denoising methods were evaluated in two ways: by the average temporal SNR inside the original activated spot, and by the shape of the spot detected by thresholding the temporal SNR maps. Denoising methods that introduce much smoothness are better suited for low SNRs, but for images of reasonable quality they are not preferable, because they introduce heavy deformations. Wavelet-based denoising methods that introduce less smoothing preserve the sharpness of the images and retain the original shapes of active regions. We also performed statistical parametric mapping on the denoised simulated time series, as well as on a real fMRI data set. False discovery rate control was used to correct for multiple comparisons. The results show that the methods that produce smooth images introduce more false positives. The less smoothing wavelet-based methods, although generating more false negatives, produce a smaller total number of errors than Gaussian smoothing or wavelet-based methods with a large smoothing effect.     

Microstructure and residual stress distribution of similar and dissimilar electron beam welds – Maraging steel to medium alloy medium carbon steel

The influence of parent metal heat treatment condition on the residual stress distribution in dissimilar metal welds of maraging steel to quenched and tempered medium alloy medium carbon steel has been investigated. It has been observed that the residual stress distribution would be more compressive if the maraging steel is in soft condition. This is attributed to stress absorbing nature of highly yielding soft maraging steel.     

Synthesis and biological activity of novel thiazolidinediones

Novel compounds having a dual pharmacophore were synthesised and evaluated for their insulin sensitiser and anti-inflammatory properties in different animal models.     

On the statistics of extra generation in an avalanche diode

The fluctuation characteristics of the output current from an avalanche diode are investigated, allowing a spatial creation of extra carriers in the space charge layer. A spectral density is obtained for the extra generation current, assuming a uniform thermal or optical activation.     

Friction stir welding of thick section reduced activation ferritic–martensitic steel

Full penetration friction stir welding was conducted on 12?mm thick reduced activation ferritic–martensitic steel at tool rotational speeds of 500 and 900?rev?min^?1. Comparator welds at 500?rev?min^?1 were also produced in 6?mm thick reduced activation ferritic–martensitic steel plate to evaluate section thickness effects. Increase in section thickness led to an increase in heat input, which strongly influenced the microstructure evolution in stir zone (SZ), thermo-mechanical affected zone and the overall hardness in the SZ of this steel. In the as-welded condition, the base metal microstructure was significantly altered and resulted in carbide-free grain boundaries. The desirable microstructure and mechanical properties were achieved by subjecting the as-welded joints to appropriate post-weld heat treatments.     

An exact method for determining local solid fractions in discrete element method simulations

A novel solid fraction algorithm is presented which accounts for the partial volume of a sphere straddling cuboidal bin boundaries. The algorithm accounts for spheres intersecting a single plane (face), two perpendicular planes (edge), or three perpendicular planes (corner). Comparisons are made against the more common algorithm in which the solid fraction is determined by assigning the sphere's total volume to the bin in which the sphere's center of volume (COV) is located. Bin size‐to‐sphere diameter ratios >30 must be used to give errors <5% when using the traditional method when applied to simple cubic (SC) and hexagonal packing assemblies. Bin size‐to‐sphere diameter ratios larger than five are required for random sphere packings. Although time averaged solid fraction measurements are similar using either the exact or COV solid fraction schemes, the scatter in the COV method is much larger than for the exact method. © 2010 American Institute of Chemical Engineers AIChE J, 2010