Corrosion of tin in citric acid solution and the effect of some inorganic anions

The corrosion behaviour of tin in different concentrations of citric acid solutions (0.3–1.0 M, pH=1.8) was studied at 30 °C by potentiodynamic technique. The E/I profiles exhibit an active passive behaviour. The active dissolution involves one anodic peak A associated with a dissolution of the metals as Sn(II) species. The passivity is due to the formation of thin film of SnO₂ and or Sn(OH)₄ on the anode surface. The cathodic sweep shows a small peak C related to the reduction of the passive film. The peak current density I_p of peak A increases with increasing both acid concentration and sweep rate.

The effects of adding increasing concentrations of Na₂CrO₄, NaMoO₄, NaNO₃ and NaNO₂ on the corrosion of tin in 0.5 M citric acid at 30 °C were investigated. Both CrO₄²⁻ and MoO₄²⁻ ions inhibit the corrosion of tin and the extent of inhibition enhances with their concentrations. Addition of either NO₃⁻ or NO₂⁻ accelerates the corrosion of tin. NO₃⁻ ions are more aggressive than NO₂⁻ ions.     

Egg Thiamine Status of Lake Ontario Salmonines 1995–2004 with Emphasis on Lake Trout

Alewives (Alosa pseudoharengus), the major prey fish for Lake Ontario, contain thiaminase. They are associated with development of a thiamine deficiency in salmonines which greatly increases the potential for developing an early mortality syndrome (EMS). To assess the possible effects of thiamine deficiency on salmonine reproduction we measured egg thiamine concentrations for five species of Lake Ontario salmonines. From this we estimated the proportion of families susceptible to EMS based on whether they were below the ED20, the egg thiamine concentration associated with 20% mortality due to EMS. The ED20s were 1.52, 2.63, and 2.99 nmol/g egg for Chinook salmon (Oncorhynchus tshawytscha), lake trout (Salvelinus namaycush), and coho salmon (Oncorhynchus kisutch), respectively. Based on the proportion of fish having egg thiamine concentrations falling below the ED20, the risk of developing EMS in Lake Ontario was highest for lake trout, followed by coho (O. kisutch), and Chinook salmon, with the least risk for rainbow trout (O. mykiss). For lake trout from western Lake Ontario, mean egg thiamine concentration showed significant annual variability during 1994 to 2003, when the proportion of lake trout at risk of developing EMS based on ED20 ranged between 77 and 100%. Variation in the annual mean egg thiamine concentration for western Lake Ontario lake trout was positively related (p < 0.001, r² = 0.94) with indices of annual adult alewife biomass. While suggesting the possible involvement of density-dependent changes in alewives, the changes are small relative to egg thiamine concentrations when alewife are not part of the diet and are of insufficient magnitude to allow for natural reproduction by lake trout.     

Synthesis and characterization of radiation grafted copolymer for removal of nonionic organic contaminants

Nonionic organic contaminants such as phenol, benzene, and toluene from contaminated wastewater on laboratory scale can be effectively sorbed by cellulosic wood pulp sheet incorporated with three polar functional groups. The synthesis was carried out by graft copolymerization reaction of N,N‐dimethylaminoethylmethacrylate with methacrylic acid onto wood pulp. The preparation conditions at which the grafting process proceeds homogeneously are determined. Characterization and some selected properties of the original and grafted wood pulp were evaluated using FTIR and scanning electron microscope, also, the removal of phenol, benzene, and toluene on laboratory scale was investigated by using gas chromatography. It was found that phenol shows the highest removal percent than that of benzene and toluene. The efficiency of removal of the nonionic contaminants is found to be 97%, which shows a great promise for its applicability in the removal of organic contaminates from wastewater. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3589–3595, 2006     

Dynamic Testing of Prestressed Concrete Bridges and Numerical Verification

This paper describes different dynamic tests carried out on three bridges, B14, B15, and B13, over highway E19, which connects Brussels and Antwerpen in Belgium. Different excitation types are considered: a drop weight, a heavy truck on the bridge, and ambient vibrations mainly due to the traffic under the bridge. Finite-element models are constructed to support and verify the dynamic measurements. The modal parameters are extracted from the response time series using the data dependent system approach. A vector autoregressive model is developed and successfully applied to the measured responses in time domain. Good correlation between the finite-element simulations and the experiments is obtained.     

A general approach for multi-oriented text line extraction of handwritten documents

The multi-orientation occurs frequently in ancient handwritten documents, where the writers try to update a document by adding some annotations in the margins. Due to the margin narrowness, this gives rise to lines in different directions and orientations. Document recognition needs to find the lines everywhere they are written whatever their orientation. This is why we propose in this paper a new approach allowing us to extract the multi-oriented lines in scanned documents. Because of the multi-orientation of lines and their dispersion in the page, we use an image meshing allowing us to progressively and locally determine the lines. Once the meshing is established, the orientation is determined using the Wigner–Ville distribution on the projection histogram profile. This local orientation is then enlarged to limit the orientation in the neighborhood. Afterward, the text lines are extracted locally in each zone basing on the follow-up of the orientation lines and the proximity of connected components. Finally, the connected components that overlap and touch in adjacent lines are separated. The morphology analysis of the terminal letters of Arabic words is here considered. The proposed approach has been experimented on 100 documents reaching an accuracy of about 98.6%.     

The Valve Metal Character of Zirconium as inferred from anode potential measurements in mineral acid solutions

A study on the value metal character of Zr in 0.1 M solutions of H₂SO₄, HNO₃, and H₃PO₄ has been performed using the anode potential as the primary variable in galvanostatic, potentiostatic, and capacity measurements. A method of surface pre-treatment, which suppresses both O₂ evolution and metal dissolution, has been described. Kinetic parameters of oxide growth have been calculated. The results indicate that:

• (i) the high field approximation is applicable following an exponential law, and
• (ii) the height and activation distance of the energy barrier for ion transport through the oxide phase (Verwey model) are the same three acids.

Measurements have been also made on the dielectric breakdown of oxide, and this occurs at potentials above 200 V. Direct capacity measurements give similar results as those based on reciprocal capacity calculated from galvanostatic experiments. It is concluded that the dominant anodic oxide species is ZrO₂ having a dielectric constant of 25. Open circuit potential measurements show that Zr is spontaneously oxidized in the three acids.     

Autocatalytic dissolution of Pb in HNO3

The reaction between Pb and HNO₃ has been investigated using the thermometric technique. Weight-loss measurements on the reaction were also obtained. As the HNO₃ concentration is increased from 5×10^–2 to 4mol l^–1, the corrosion rate increases. This is shown thermometrically by a substantial increase in the maximum temperature attained, T _m, as well as a decrease in the time, t, required for reaching T _m. Dissolution of Pb in HNO₃ is proposed to take place according to an autocatalytic mechanism. Passivation sets were detected in solutions 11 mol l^–1 HNO₃. A parallel indication between the thermometric technique and weight-loss measurements was obtained. The rate-determining step of the autocatalytic process involves HNO₂ in dissolution of Pb in HNO₃. This is supported by the results of addition of hydrazine to the solution. This additive raises the maximum measured temperature, without affecting the corresponding time necessary to reach it. The effect of addition of NaNO₂, NaNO₃, NaCl, Na₂SO₄, NaH₂PO₄ and NaClO₄ on the reaction number, RN, of Pb in 4 mol l^–1 HNO₃ was examined. Only NaNO₂ accelerates the dissolution reaction while the other salts show as inhibition effect. It was found that these additives inhibit dissolution due to the displacement of some cathodic depolarizing components, as NO₂, from the active sites on the metal surface. The effect of addition of HCl, H₂SO₄, HClO₄ and H₃PO₄ on the reaction number, RN, of Pb in 4 mol l^–1 HNO₃ was also investigated. The observed acceleration and retardation of the dissolution of Pb was found to be dependent on both the concentration and nature of anions of the extra acids added.     

A 2-D five-noded finite element to model power singularity

A 2-D five-noded finite element which contains a singularity is developed. The new element is compatible with cubic standard isoparametric elements. The main advantage of using cubic isoparametric elements over quadratic elements is to reduce the number of elements required to model a structure for results of comparable accuracy. The element is tested on two different examples. In the first example, an edge crack problem is analyzed using two different meshes. The second example is a crack perpendicular to the interface problem which is solved for two different specific composites. The results obtained using the proposed element are compared with those obtained using other existing elements in the literature. Those comparisons demonstrate the superiority of the present technique in using less number of elements and nodes to produce accurate results.