Physical training: a tool for increasing work tolerance limits of employees engaged in manual handling tasks.

The lack of physical fitness is a contributing factor to the etiology of musculoskeletal disorders resulting from the manual handling of material in industry. Thus the major objectives of this paper were (1) to discuss the role of physical fitness in the control of occupational injuries; (2) to review techniques available in the exercise physiology literature for increasing human physical capacity in industry; and (3) to review and evaluate studies on the effects of physical training on individuals engaged in manual handling tasks.     

Validation of a Gas Chromatography-Mass Spectrometry Method for the Measurement of the Redox State Metabolic Ratios Lactate/Pyruvate and β-Hydroxybutyrate/Acetoacetate in Biological Samples

The metabolic ratios lactate/pyruvate and β-hydroxybutyrate/acetoacetate are considered valuable tools to evaluate the in vivo redox cellular state by estimating the free NAD+/NADH in cytoplasm and mitochondria, respectively. The aim of the current study was to validate a gas-chromatography mass spectrometry method for simultaneous determination of the four metabolites in plasma and liver tissue. The procedure included an o-phenylenediamine microwave-assisted derivatization, followed by liquid-liquid extraction with ethyl acetate and silylation with bis(trimethylsilyl)trifluoroacetamide:trimethylchlorosilane 99:1. The calibration curves presented acceptable linearity, with a limit of quantification of 0.001 mM for pyruvate, β-hydroxybutyrate and acetoacetate and of 0.01 mM for lactate. The intra-day and inter-day accuracy and precision were within the European Medicines Agency’s Guideline specifications. No significant differences were observed in the slope coefficient of three-point standard metabolite-spiked curves in plasma or liver and water, and acceptable recoveries were obtained in the metabolite-spiked samples. Applicability of the method was tested in precision-cut liver rat slices and also in HepG2 cells incubated under different experimental conditions challenging the redox state. In conclusion, the validated method presented good sensitivity, specificity and reproducibility in the quantification of lactate/pyruvate and β-hydroxybutyrate/acetate metabolites and may be useful in the evaluation of in vivo redox states.     

Consistent estimation of the memory parameter for nonlinear time series

Abstract. For linear processes, semiparametric estimation of the memory parameter, based on the log‐periodogram and local Whittle estimators, has been exhaustively examined and their properties well established. However, except for some specific cases, little is known about the estimation of the memory parameter for nonlinear processes. The purpose of this paper is to provide the general conditions under which the local Whittle estimator of the memory parameter of a stationary process is consistent and to examine its rate of convergence. We show that these conditions are satisfied for linear processes and a wide class of nonlinear models, among others, signal plus noise processes, nonlinear transforms of a Gaussian process ξ_t and exponential generalized autoregressive, conditionally heteroscedastic (EGARCH) models. Special cases where the estimator satisfies the central limit theorem are discussed. The finite‐sample performance of the estimator is investigated in a small Monte Carlo study.     

Viability study of different reverse osmosis membranes for application in the tertiary treatment of wastes from the tanning industry

The tanning industry uses large quantities of water and produces a correspondingly large amount of wastewater with high levels of salts and organic materials. Before these wastewaters can be eliminated, they must be submitted to a suitable depuration treatment. However, conventional treatments such as those used for urban wastewater are not able to reduce the salt content sufficiently and new methods need to be studied in the light of new technologies. In this aspect, membrane technology is increasingly used as a separation technique in chemical and environmental engineering, including desalination, selective separation and wastewater treatment. In this paper, we describe a comparative study of six different reverse osmosis membranes, which were tested for their ability to reduce the salt content in the tertiary treatment after the elimination of chromium salts and organic matter of an effluent from a pilot plant for treating industrial wastewater from the tanning industry to reach the legal levels established for their safe disposal. The membranes were checked using a 3×10⁻³ m² flat cell, where the concentrated streams were recirculated to the feed reservoir.     

Foams based on low density polyethylene/hectorite nanocomposites: Thermal stability and thermo‐mechanical properties

Novel polymer nanocomposite foams made by a two step compression molding method are analyzed in this article. Nanocomposites of low density polyethylene and an organo‐modified hectorite were first melt compounded and then foamed using a compression molding method. To study the influence of the presence and the amount of hectorite in both mechanical and thermal properties, samples with 3% and 7% content of hectorite were prepared. Polyethylene crystalline characteristics and thermal stability of the samples were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. Mechanical properties of foams and solid nanocomposites were analyzed by using dynamical mechanical analysis (DMA). Thermal expansion of the samples was analyzed by thermomechanical analysis. The results indicate that the exfoliation of hectorite platelets was achieved after the foaming process, but not during the melt mixing step. Foams with hectorite nanoparticles exhibit improved thermal stability and mechanical properties when compared with neat polymeric foams. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

GraftFast Surface Engineering to Improve MOF Nanoparticles Furtiveness

Controlling the outer surface of nanometric metal–organic frameworks (nanoMOFs) and further understanding the in vivo effect of the coated material are crucial for the convenient biomedical applications of MOFs. However, in most studies, the surface modification protocol is often associated with significant toxicity and/or lack of selectivity. As an alternative, how the highly selective and general grafting GraftFast method leads, through a green and simple process, to the successful attachment of multifunctional biopolymers (polyethylene glycol (PEG) and hyaluronic acid) on the external surface of nanoMOFs is reported. In particular, effectively PEGylated iron trimesate MIL‐100(Fe) nanoparticles (NPs) exhibit suitable grafting stability and superior chemical and colloidal stability in different biofluids, while conserving full porosity and allowing the adsorption of bioactive molecules (cosmetic and antitumor agents). Furthermore, the nature of the MOF–PEG interaction is deeply investigated using high‐resolution soft X‐ray spectroscopy. Finally, a cell penetration study using the radio‐labeled antitumor agent gemcitabine monophosphate (³H‐GMP)‐loaded MIL‐100(Fe)@PEG NPs shows reduced macrophage phagocytosis, confirming a significant in vitro PEG furtiveness.     

Proof Pearl: a Formal Proof of Higman��s Lemma in ACL2

Higman??s lemma is an important result in infinitary combinatorics, which has been formalized in several theorem provers. In this paper we present a formalization and proof of Higman??s Lemma in the ACL2 theorem prover. Our formalization is based on a proof by Murthy and Russell, where the key termination argument is justified by the multiset relation induced by a well-founded relation. To our knowledge, this is the first mechanization of this proof.     

A hybrid heuristic for the traveling salesman problem

The combination of genetic and local search heuristics has been shown to be an effective approach to solving the traveling salesman problem (TSP). This paper describes a new hybrid algorithm that exploits a compact genetic algorithm in order to generate high-quality tours, which are then refined by means of the Lin-Kernighan (LK) local search. The local optima found by the LK local search are in turn exploited by the evolutionary part of the algorithm in order to improve the quality of its simulated population. The results of several experiments conducted on different TSP instances with up to 13,509 cities show the efficacy of the symbiosis between the two heuristics