Biodegradation of poly(lactic acid)—cassava bagasse composites produced by injection molding

Neat poly (lactic acid) (PLA) and PLA/cassava bagasse (CB) composites were used to produce seedling tubes by extrusion and injection molding. The tubes were buried in simulated soil, and their biodegradation was investigated by weight loss, scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). After 180 days, the composites' biodegradation was higher than neat PLA material, and the higher the CB content, the higher the biodegradation, which caused fissures and voids in the material. The biodegradation of PLA/CB composites increased the phosphorus content in the soil after 180 days. Composites of PLA with CB, an abundant agro-industrial residue in Brazil, are promising because they can reduce the environmental impact due to CB's proper destination, and the composites' costs and biodegradation are faster than pure PLA material. Both the faster biodegradation of the tube and the higher P content are advantageous for seedling tubes.     

Kinetic,thermodynamic parameters and in vitro digestion of tannase from Aspergillus tamarii URM 7115

Tannase is an enzyme used in various industries and produced by a large number of microorganisms. The aim of this study was to evaluate tannase production to determine the biochemical, kinetic, and thermodynamic properties and to simulate tannase in vitro digestion. The tannase-producing fungal strain was isolated from “jamun” leaves and identified as Aspergillus tamarii. Temperature at 26°C for 67?h was the best combination for maximum tannase activity (6.35-fold; initial activity in Plackett–Burman design—15.53?U/mL and average final activity in Doehlert design—98.68?U/mL). The crude extract of tannase was optimally active at 40°C, pH 5.5 and 6.5. Moreover, tannase was stimulated by Na⁺, Ca²⁺, Mg²⁺, and Mn²⁺. The half-life at 40°C lasted 247.55?min. The free energy of Gibbs, enthalpy, and entropy, at 40°C, was 81.47, 16.85, and ?0.21?kJ/mol?·?K, respectively. After total digestion, 123.95% of the original activity was retained. Results suggested that tannase from A. tamarii URM 7115 is an enzyme of interest for industrial applications, such as gallic acid production, additive for feed industry, and for beverage manufacturing, due to its catalytic and thermodynamic properties.     

Formulation for Reliable Analysis of Structural Frames

Structural engineers use design codes formulated to consider uncertainty for both reinforced concrete and structural steel design. For a simple one-bay structural steel frame, we survey typical uncertainties and compute an interval solution for displacements and forces. The naive solutions have large over-estimations, so we explore the Mullen-Muhanna assembly strategy, scaling, and constraint propagation to achieve tight enclosures of the true ranges for displacements and forces in a fraction of the CPU time typically used for simulations. That we compute tight enclosures, even for large parameter uncertainties used in practice, suggests the promise of interval methods for much larger structures.     

Epidemiology of Trauma and Posttraumatic Stress Disorder in Mexico.

Prevalence rates of trauma and posttraumatic stress disorder (PTSD) were estimated from a probability sample of 2,509 adults from 4 cities in Mexico. PTSD was assessed according to Diagnostic and Statistical Manual of Mental Disorders (American Psychiatric Association, 1994) criteria using the Composite International Diagnostic Interview (CIDI; WHO, 1997). Lifetime prevalence of exposure and PTSD were 76% and 11.2%, respectively. Risk for PTSD was highest in Oaxaca (the poorest city), persons of lower socioeconomic status, and women. Conditional risk for PTSD was highest following sexual violence, but nonsexual violence and traumatic bereavement had greater overall impact because of their frequency. Of lifetime cases, 62% became chronic; only 42% received medical or professional care. The research demonstrates the importance of expanding the epidemiologic research base on trauma to include developing countries around the world. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Physical and chemical characteristics of butterfat fractions obtained by crystallization from molten fat

Both summer and winter butterfats were fractionated using a laboratory procedure which was designed to simulate a commercial fractionation process. The process is based on a slow, controlled cooling of the melted fat, a short stabilization time at the fractionation temperature, and separation of the crystals from the liquid oil by vacuum filtration using a stainless steel perforated disc. Fractionation temperatures of 29, 26, 23 and 19 C for winter butterfat and 29 and 19 C for summer butterfat were used to obtain solid and liquid fractions at each temperature. Three replications at each temperature showed good reproducibility of results. The fractions were characterized by their fatty acid and triglyceride compositions, melting and crystallization behavior, iodine value, peroxide value and melting point. Presented at the AOCS meeting in Philadelphia in May 1985.     

Epoxy paint failure in B-52 fuel tanks: Part II. Influence of DIEGME concentration in the fuel on the failure process

A model has been proposed to explain the failure of the original BMS10-39 epoxy paint on upper vertical surfaces in B-52 fuel tanks. The model involves interaction of the paint with DIEGME, a fuel system ice inhibitor (FSII) in jet fuel, that is distilled from the liquid fuel. In this communication, distillation experiments used to support the model are refined to better match the mass transfer of vapor from fuel in a B-52 fuel tank at close to room temperature. The interaction of these lower temperature distillates with the paint affirms the earlier model. On the basis of these experiments it is proposed that paint failure may be controlled or eliminated by reducing the level of DIEGME in the fuel. Proposed changes in military jet fuel composition are detailed.     

Netted radar sensitivity and ambiguity

The performance of netted radar is evaluated in terms of a netted version of the radar equation and the ambiguity function. A software simulation has been developed to allow assessment of netted radar sensitivity and ambiguity properties in both two-and three-dimensional space. Simulation results demonstrate that coherent netted radar sensitivity depends not only on the radar parameters, but also on the numbers, locations and specification of transmit and receive nodes. The netted radar ambiguity function is affected by a combination of many factors. In addition to those that determine the form of the monostatic ambiguity function, the locations of transmit and receive nodes as well as the position and velocity of the target all are shown to play an important role in evaluating system performance. As a result of these dependencies, it is shown that there is severe degradation of range and Doppler resolution when a target crosses sufficiently close to a transmit-receive baseline.