Viscoelastic Behavior of Synthesized Liquid Soaps and Surface Activity Properties of Surfactants

In the present work, a rheological study of liquid soaps prepared from different mixture of surfactants as a function of surfactant type and concentration was performed. The curves of shear stress vs. shear rate and viscosity vs. shear rate were recorded at constant temperature, 294 ± 0.1 K. The surface activity properties were also studied. The results of the study showed that values of surface tension, γ, were in the range 31–40 mN m⁻¹ and the critical micelle concentration (CMC), was of the order 10⁻⁴ mol L⁻¹. The calculated maximum surface excess, Γ_max, varied from 2.40 to 3.66 μmol m⁻², while minimum area per molecule, A_min, varied from 41.1 (for amphoterics) to 81.4 Ų (for nonionic surfactants). The standard free energy of micellization, −29.8 and −29.3 kJ mol⁻¹ for anionic and amphoteric surfactants, respectively, were while values for nonionic surfactants varied between −31.8 and − 30.3 kJ mol⁻¹. The free energy of adsorption, was the lowest for amphoteric surfactants (−37.9 kJ mol⁻¹), followed by anionics (−40.4 kJ mol⁻¹) and nonionics (−43.34 to −46.84 kJ mol⁻¹), indicating that micellization process is spontaneous in the examined medium. The synthetized liquid soaps show pseudoplastic behavior and they achieved pipe flow. The results of this research indicate that flow behavior was affected significantly by the ionic charge of the surfactant and the ionic strength of the formulation, suggesting that the flow behavior could be changed by manipulating the choice of the surfactant and salinity. The pH value of all liquid soaps examined were weakly acidic, in the range of 5.0–6.4.     

Exploring the Bioactive Potentials of C60-AgNPs Nano-Composites against Malignancies and Microbial Infections

At present, the potential role of the AgNPs/endo-fullerene molecule metal nano-composite has been evaluated over the biosystems in-vitro. The intra-atomic configuration of the fullerene molecule (C₆₀) has been studied in-vitro for the anti-proliferative activity of human breast adenocarcinoma (MDA-MB-231) cell lines and antimicrobial activity against a few human pathogens that have been augmented with the pristine surface plasmonic electrons and antibiotic activity of AgNPs. Furthermore, FTIR revealed the basic vibrational signatures at ~3300 cm⁻¹, 1023 cm⁻¹, 1400 cm⁻¹ for O-H, C-O, and C-H groups, respectively, for the carbon and oxygen atoms of the C₆₀ molecule. NMR studies exhibited the different footprints and magnetic moments at ~7.285 ppm, explaining the unique underlying electrochemical attributes of the fullerene molecule. Such unique electronic and physico-chemical properties of the caged carbon structure raise hope for applications into the drug delivery domain. The in-vitro dose-dependent application of C₆₀ elicits a toxic response against both the breast adenocarcinoma cell lines and pathogenic microbes. That enables the use of AgNPs decorated C₆₀ endo fullerene molecules to design an effective anti-cancerous drug delivery and antimicrobial agent in the future, bringing a revolutionary change in the perspective of a treatment regime.     

Toward tunable thin-film filters for wavelength division multiplexing applications

We provide a detailed analysis of the various problems connected with the development of tunable thin-film filters for wavelength-division multiplexing applications. We examine the relation between the change in layer thickness and the central wavelength shift for various configurations and point out the significance of the structure of the reflectors, the spacer thickness, and the location of the active layers. We describe and compare practical arrangements using either temperature or an electric field as the driving parameter.     

Light emission from sources located within metallodielectric planar microcavities

A simple, rigorous electromagnetic formula is derived for predicting the electromagnetic power provided by sources located in transparent or dissipative planar microcavities. With this simple approach, we compare numerically and experimentally the electromagnetic power that escapes the microcavity when the source is located in a metallodielectric or in an all-dielectric resonant planar structure. Although a strong light-extraction coefficient might be expected for metallodielectric microcavities, we show that these attractive structures suffer from metal absorption even when thin metallic layers are used. Experiments implemented with europium chelates located in metallodielectric or in all-dielectric microcavities confirm this result.     

Scattering-reduction effect with overcoated rough surfaces: theory and experiment.

We show that a scattering-reduction effect is obtained by coating a rough surface with an antireflection layer. This research is a generalization of Amra's [J. Opt. Soc. Am. A 10, 365-374 (1993)] study of smooth surfaces conducted with a first-order theory to the case of rough surfaces. We show that the differential method with the R matrix algorithm can be used to study scattering from multilayered rough surfaces. A comparison between numerical and experimental results is given.     

Optical characterization of an unknown single layer: Institut Fresnel contribution to the Optical Interference Coatings 2004 Topical Meeting Measurement Problem

We present the characterizations performed at the Institut Fresnel for the Measurement Problem of the Optical Interference Coatings 2004 Topical Meeting. A single layer coated on a fused-silica substrate of unknown composition and parameters is analyzed in terms of optogeometrical parameters, uniformity, and scattering. We determine the refractive index and the average thickness of the coating, then provide the localized determination of the thickness with a 2 mm spatial resolution. Topography measurements include atomic force microscopy and angle-resolved scattering measurements. These results are completed thanks to a Taylor Hobson noncontact 3D surface profiler.     

Ellipsometry of reflected and scattered fields for the analysis of substrate optical quality

Specular ellipsometry is a well-known and efficient technique to characterize surfaces and coatings. This technique has been extended to the measurement of scattered light. We present an experimental setup, using a polarization modulator, which permits us to characterize transition layers and roughness without a calibration procedure. Experimental results are presented concerning transition layers for damage threshold applications and for rough surfaces or bulks.     

Low-level scattering and localized defects

We investigate the origin of low-level scattering from high-quality coatings produced by ion-assisted deposition and ion plating. For this purpose we use the polarization ratio of light scattering to separate surface and bulk effects that characterize the intrinsic action of the thin-film materials. In the first step the method is tested and validated at scattering levels greater than 10(-5). In the second step it is applied at low levels, and the results reveal some anomalies. To conclude, we perform a detailed analysis of scattering resulting from the presence of a few localized defects in the coatings.     

Conflict resolution in group decision making: insights from a simulation study

User Modeling and User-Adapted Interaction - An individual’s conflict resolution styles can have a large impact on the decision making process of a group. This impact is affected by a variety...     

Light-scattering characterization of transparent substrates

Angle-resolved light scattering has been used for decades to quantify the surface roughness of optical components. However, because this technique is affected by the contribution of both interfaces of the sample, it cannot be applied to transparent substrates. We show how to overcome this issue and apply these principles to the characterization of superpolished samples.