Novel (Phenothiazinyl)Vinyl-Pyridinium Dyes and Their Potential Applications as Cellular Staining Agents

We report here the synthesis and structural characterization of novel cationic (phenothiazinyl)vinyl-pyridinium (PVP) dyes, together with optical (absorption/emission) properties and their potential applicability as fluorescent labels. Convective heating, ultrasound irradiation and mechanochemical synthesis were considered as alternative synthetic methodologies proficient for overcoming drawbacks such as long reaction time, nonsatisfactory yields or solvent requirements in the synthesis of novel dye (E)-1-(3-chloropropyl)-4-(2-(10-methyl-10H-phenothiazin-3-yl)vinyl)pyridin-1-ium bromide 3d and its N-alkyl-2-methylpyridinium precursor 1c. The trans geometry of the newly synthesized (E)-4-(2-(7-bromo-10-ethyl-10H-phenothiazin-3-yl)vinyl)-1-methylpyridin-1-ium iodide 3b and (E)-1-methyl-4-(2-(10-methyl-10H-phenothiazin-3-yl)vinyl)pyridin-1-ium tetrafluoroborate 3a′ was confirmed by single crystal X-ray diffraction. A negative solvatochromism of the dyes in polar solvents was highlighted by UV-Vis spectroscopy and explanatory insights were supported by molecular modeling which suggested a better stabilization of the lowest unoccupied molecular orbitals (LUMO). The photostability of the dye 3b was investigated by irradiation at 365 nm in different solvents, while the steady-state and time-resolved fluorescence properties of dye 3b and 3a′ in solid state were evaluated under one-photon excitation at 485 nm. The in vitro cytotoxicity of the new PVP dyes on B16-F10 melanoma cells was evaluated by WST-1 assay, while their intracellular localization was assessed by epi-fluorescence conventional microscopy imaging as well as one- and two-photon excited confocal fluorescence lifetime imaging microscopy (FLIM). PVP dyes displayed low cytotoxicity, good internalization inside melanoma cells and intense fluorescence emission inside the B16-F10 murine melanoma cells, making them suitable staining agents for imaging applications.     

Socioeconomic Status, Resources, Psychological Experiences, and Emotional Responses: A Test of the Reserve Capacity Model.

The current study used ecological momentary assessment to test several tenets of the reserve capacity model (L.C. Gallo & K. A. Matthews, 2003). Women (N = 108) with varying socioeconomic status (SES) monitored positive and negative psychosocial experiences and emotions across 2 days. Measures of intrapsychic and social resources were aggregated to represent the reserve capacity available to manage stress. Lower SES was associated with less perceived control and positive affect and more social strain. Control and strain contributed to the association between SES and positive affect. Lower SES elicited greater positive but not negative emotional reactivity to psychosocial experiences. Women with low SES had fewer resources relative to those with higher SES, and resources contributed to the association between SES and daily experiences. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Cardiac Troponin Biosensor Designs: Current Developments and Remaining Challenges

Acute myocardial infarction (AMI) is considered as one of the main causes of death, threating human lives for decades. Currently, its diagnosis relies on electrocardiography (ECG), which has been proven to be insufficient. In this context, the efficient detection of cardiac biomarkers was proposed to overcome the limitations of ECG. In particular, the measurement of troponins, specifically cardiac troponin I (cTnI) and cardiac troponin T (cTnT), has proven to be superior in terms of sensitivity and specificity in the diagnosis of myocardial damage. As one of the most life-threatening conditions, specific and sensitive investigation methods that are fast, universally available, and cost-efficient to allow for early initiation of evidence-based, living-saving treatment are desired. In this review, we aim to present and discuss the major breakthroughs made in the development of cTnI and cTnT specific biosensor designs and analytical tools, highlighting the achieved progress as well as the remaining challenges to reach the technological goal of simple, specific, cheap, and portable testing chips for the rapid and efficient on-site detection of cardiac cTnI/cTnT biomarkers in order to diagnose and treat cardiovascular diseases at an incipient stage.     

Structure and heat capacity of the NaCeF4 compound

This work continued our general research program on obtaining metallic cerium by electrodeposition from NaCeF4 dis-solved in different molten fluorides. The structure of NaCeF4 (cubic or hexagonal depe...     

Synthesis and characterization of a titanium phosphate-tellurite glass for Faraday rotators

This work is focused on investigation of thermal, structural, optical, magnetic, and magneto-optical properties of novel titanium phosphate-tellurite glass applied as Faraday rotators. The glass belonging to the system 35Li₂O–10Al₂O₃–5TiO₂–45P₂O₅–5TeO₂ was prepared by a nonconventional wet route of raw materials processing, followed by melting-quenching-annealing steps. Some important physical properties of the investigated glass have been measured and calculated, providing knowledge related to glass compactness, electronic structure, glass forming capability, etc. XRD analysis evidenced an amorphous network structure of the investigated glass. The optical absorption in the Vis domain is mainly due to Ti³⁺ ions and Te₂ clusters formed during the glass melting process. A relatively low optical absorption is noticed over 600 nm that activates a significant Faraday magneto-optical effect. Photoluminescence bands in the blue, red, and infrared domains are observed, caused by Te₂ clusters formed during the glass melting process. The magnetization in dependency on applied magnetic field reveals a complex behavior of the glass, depending on temperature. Thus, it is found a ferromagnetic behavior up to 2000 Oe, a paramagnetic component up to 40 000 Oe, followed by a diamagnetic one over 40 000 Oe. Faraday rotation angle and Verdet constant values in the visible domain are correlated with the reduced TeO₂ content of the glass.     

Identification of peptides in traditional and probiotic sheep milk yoghurt with angiotensin I-converting enzyme (ACE)-inhibitory activity

Two sets of traditional Greek sheep milk yoghurt were produced: the first one (YC) using normal yoghurt culture (Lactobacillus delbrueckii subsp. bulgaricus ?10.13 and Streptococcus thermophilus ?10.7) and the second (PR) with the same normal culture mixed with Lactobacillus paracasei subsp. paracasei DC412. YC and PR had similar physicochemical properties and proteolysis patterns throughout storage. Both products showed similar peptide profiles by RP-HPLC but quantitative differences were observed in respect to storage time. Single-strain cultures of the microorganisms used showed similar peptide profiles for both lactobacilli, yet L. delbrueckii subsp. bulgaricus was the most proteolytic of all three microorganisms. The peptide content and the ACE-inhibitory activity of the water-soluble extracts of yoghurts, YC and PR, increased throughout storage. Major peptides were identified from yoghurt PR and from the separate cultures of L. delbrueckii subsp. bulgaricus and L. paracasei subsp. paracasei. Most of these peptides were derived from β-casein. A peptide, β-CN f114-121, with well-established ACE-inhibitory and opiate-like activity was identified in yoghurt PR. Further identified peptides were regarded as potential ACE-inhibitors according to their sequence.     

Phytochemical Characterization of Veronica officinalis L., V. teucrium L. and V. orchidea Crantz from Romania and Their Antioxidant and Antimicrobial Properties

Aerial parts of Veronica species are used in Romanian traditional medicine for the treatment of various conditions like kidney diseases, cough, and catarrh, and are known for their wound-healing properties. In the present study, the phenolic and sterolic content and the antioxidant and antimicrobial activities of three Veronica species (Plantaginaceae), V. officinalis L., V. teucrium L. and V. orchidea Crantz, were studied. The identification and quantification of several phenolic compounds and phytosterols were performed using LC/MS techniques and the main components were p-coumaric acid, ferulic acid, luteoline, hispidulin and β-sitosterol. More than that, hispidulin, eupatorin and eupatilin were detected for the first time in the Veronica genus. Nevertheless, representatives of the Veronica genus were never investigated in terms of their phytosterol content. The antioxidant potential investigated by Trolox equivelents antioxidant capacity (TEAC) and EPR spectroscopy revealed that V. officinalis and V. orchidea extracts presented similar antioxidant capacities, whilst the values registered for V. teucrium extract are lower. Regarding the antimicrobial activity of the investigated species, Staphylococcus aureus, Listeria monocytogenes and Listeria ivanovii were the most sensitive strains with MIC values between 3.9 and 15.62 mg/mL. The results obtained by this study may serve to promote better use of representatives from the genus Veronica as antioxidant and antimicrobial agents.     

Metallo-functionalized first-generation salicylaldimine poly(propylenimine) tetraamine dendrimers: Electrochemical study and atomic force microscopy imaging

The adsorption and the redox processes of two first-generation salicylaldiamine dendritic ligands and their copper, cobalt and nickel metallo-functionalized complexes have been studied at two types of carbon electrode surface. Glassy carbon (GC) was used in an electrochemistry study and highly oriented pyrolitic graphite (HOPG) in ex situ atomic force microscopy (AFM) imaging. All salicylaldimine ligands and their metallo-functionalized complexes adsorb on the surface of the HOPG electrode, resulting in the formation of nanoclusters and films, which vary between 0.9 and 6 nm in size, depending on the metallo-functionalized salicylaldimine dendrimer chemical composition and solution concentration. Differential pulse voltammetry of the surface-confined films has shown that the anodic reactions observed correspond to the oxidation of the hydroxyl groups present in the ligand structure of all compounds. However, by following the changes in peak currents, potentials and width at half height it has been shown that destabilization of the ligand internal structure occurred in the metallo-functionalized complexes depending on the metal involved. The electrochemical behaviour of the surface-confined films observed in buffer solution was related to the morphology, obtained by AFM, of the immobilised first-generation salicylaldiamine dendritic ligands and corresponding salicylaldimine metallo-functionalized complexes.     

Multi-element including rare earth content of lichens, bark, soils, and waste following industrial closure

The fate of rare earth and other rare elements entering the environment is largely unknown. The lichen Hypogymnia physodes was transplanted over a 40 km long transect centered on a major metallurgical waste dump close to the Zlatna town center two weeks after smelter closure. Lichens, bark, soil, and waste dump materials were analyzed for 56 elements (including REE). Lichen and bark multi-element compositions were alike, reflecting fixation of elements of environmental concern and the ability for tree canopies to concentrate substances leading to enhanced deposition to both lichens and bark. Higher REE enrichment in lichens than in soil confirm efficient fixation in lichens. The negative europium anomaly in lichens and soil, similar to that in upper crust, confirm a strong crustal influence on lichen signatures across the transect area. Multi-element analysis supports the view that epiphytic lichens, unlike trees, are not influenced by lower groundwater, and they are excellent indicators for REE and other rare elements entering the surface environment, difficult to detect by conventional means.     

Robocast zirconia-toughened alumina scaffolds: Processing,structural characterisation and interaction with human primary osteoblasts

Zirconia-toughened alumina (ZTA) is the gold-standard ceramic in hip arthroplasty, but still lacks direct osseointegration and a metal shell, often coated with a bioactive layer, is currently required. The latter could potentially be replaced by a thinner, architectured ZTA layer, thereby allowing for larger acetabular components, with larger range of motion and lower dislocation risk. Robocasting may be an adequate technique to fabricate the architectured layer. Therefore, as a first step, this study aimed to produce ZTA scaffolds (3D-ZTA) by robocasting and assess their in vitro response. Shape retention was achieved by using a stable, well-dispersed, high solid loading ink injected in acid pH waterbath. 3D-ZTA exhibit regularly spaced microporous, rough struts and fully interconnected macroporosity. Human primary osteoblasts were homogenously distributed inside 3D-ZTA and showed increased osteogenic marker expression compared to 2D-ZTA control. Further work will focus on optimizing scaffold design to improve cell retention and extracellular matrix maturation.