Controlled destruction of residual crosslinker in a silicone elastomer for drug delivery

In drug delivery systems that use silicone elastomers as a diffusion matrix for the active drug, it is common to crosslink the material by the hydrosilylation reaction. In this platinum‐catalyzed reaction, vinyl groups on a polymer add to the methyl siloxane hydride (MHS) groups on a low molecular mass crosslinker. With an excess of crosslinker, a fast curing is achieved and a fully crosslinked material is formed. Unreacted MHS groups were shown to remain in the elastomer after curing because of the excess crosslinker. In this work, a simple procedure was developed to eliminate the unreacted MHS groups from the final product. We found that storage of the product at +40°C and 75% relative humidity for a few weeks will effectively destroy the residual MHS groups in the elastomer. The effects of varying levels of humidity, oxygen, and temperature on this postcuring procedure were studied. The amount of MHS groups was measured with NMR and IR spectroscopy. We also found that the hardness of the material increased by approximately 25% as a consequence of this postcuring treatment. This increase is probably due to a secondary crosslinking reaction between MHS and silanol groups. Heat treatment at higher temperatures led to an even further increase in the hardness and compression modulus. Because no MHS groups remained in the elastomer when this heat treatment was started, it is apparent that another secondary crosslinking reaction is occurring, probably silanol condensation. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2254–2264, 2002     

Is there a pattern in European bus and coach incidents? A literature analysis with special focus on injury causation and injury mechanisms

In order to identify and describe a pattern in bus and coach incident related injuries and fatalities, and to suggest possible future measures for improvement of bus and coach safety, a literature analysis was performed. The results formed a multi-faceted pattern, which briefly can be described as follows; women travelled more frequently by bus as compared to men. Injuries sustained predominantly affected women 60 years of age and older. Of all traffic fatalities in Europe, bus and coach fatalities represented 0.3-0.5%. In the OECD countries, the risk of being killed or seriously injured was found to be seven to nine times lower for bus and coach occupants as compared to those of car occupants. Despite the fact that fatalities were more frequent on rural roads, a vast majority of all bus and coach casualties occurred on urban roads and in dry weather conditions. Boarding and alighting caused about one-third of all injury cases. Collisions were a major injury-contributing factor. Buses and coaches most frequently collided with cars, but unprotected road users were hit in about one-third of all cases of a collision, the point of impact on the bus or the coach being typically frontal or side. Rollovers occurred in almost all cases of severe coach crashes. In this type of crash projection, total ejection, partial ejection, intrusion and smoke inhalation were the main injury mechanisms and among those, ejection being the most dangerous. A 2-point belt may prevent passenger ejection, but in frontal crashes when the upper abdominal parts and the head hit the seatback in front, it could, however, contribute to head and thoracic injuries. Hence, a 3-point belt provides the best restraint in rollovers and frontal crashes.     

Some Thermodynamic Aspects of the Oxides of Chromium

To understand Cr emissions from slag melts to a vapor phase, an assessment of the stabilities of the chromium oxides at high temperatures has been carried out. The objective of the present study is to present a set of consistent data corresponding to the thermodynamic properties of the oxides of chromium, with special reference to the emission of hexavalent chromium from slags. In the current work, critical analysis of the experimental data available and a third analysis in the case of Cr₂O₃ have been carried out. Commercial databases, Fact Sage and ThermoCalc along with NIST-JANAF Thermochemical Tables, have been used for the analysis and comparisons of the results that are presented. The significant discrepancies in the available data have been pointed out. The data from NIST-JANAF Thermochemical Tables have been found to provide a set of consistent data for the various chromium oxides. An Ellingham diagram and the equations for the ΔG° (standard Gibbs free energy change) of formation of CrO _x have been proposed. The present analysis shows that CrO₃(g) is likely to be emitted from slag melts at high oxygen partial pressures.     

The nature of polymer grafts and substrate shape on the surface degradation of poly(l‐lactide)

Surface grafting of functional polymers is an effective method to alter material properties and degradation behavior. Two different substrate shapes of poly(l ‐lactide) (PLLA), i.e., films and microparticles, were surface‐grafted with hydrophilic monomers, and their surface degradation was monitored. Surface grafting with a hydrophilic and acidic polymer graft [acrylic acid (AA)] induced large alterations in the surface morphology and topography of the films. In contrast, hydrophilic and neutral polymer grafts [acrylamide (AAm)] had no significant effect on the surface degradation behavior, while the PLLA reference and co‐monomeric (AA/AAm) polymer‐grafted samples exhibited intermediate surface degradation rates. The grafted PAA chains induced a local acidic environment on the surface of the substrates, which in turn catalyzed the surface degradation process. This effect was more pronounced in the films than in the microparticles. Thus, the nature of the grafted chains and substrate geometry were shown to affect the surface degradation behavior of PLLA substrates. © 2015 The Authors Journal of Applied Polymer Science Published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42736.     

Oxygen barrier materials from renewable sources: Material properties of softwood hemicellulose‐based films

The aim of this study was to investigate the film‐forming ability of the hemicellulose O‐acetyl‐galactoglucomannan (AcGGM) and to evaluate its potential as a barrier material. The polymer film was evaluated by measurement of its oxygen permeability (Ox‐Tran® Mocon), thermal properties (differential scanning calorimetry), and dynamic mechanical properties under a humidity scan (humidity‐scan DMA). The AcGGM was isolated from industrial process water obtained from mechanical wood pulping. The self‐supporting films were formed by solution‐casting from water. As expected, a plasticizer was needed to avoid brittleness, and glycerol, sorbitol, and xylitol were compared. However, these additives resulted in higher sensitivity to moisture, which might be less beneficial for some applications. Interesting oxygen barrier and mechanical strength properties were achieved in a film obtained from a physical blend of AcGGM and either alginate or carboxymethylcellulose, both having a substantially higher molecular weight than AcGGM. No phase separation was observed, since all the components used were rich in hydroxyl functionalities. When a plasticizer was also added to the binary mixture, a compromise between (1) low O₂ permeability, (2) high mechanical toughness, and (3) flexibility of an AcGGM‐based film was obtained. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2985–2991, 2006     

Short- and long-term prognosis after coronary artery bypass grafting in relation to smoking habits

A study was conducted to determine the conditions needed to achieve the equilibrium concentration for the epimerization of d-lysergic acid diethylamide (LSD) to iso-LSD. The reaction was followed by integration of the C-9 resonance of LSD and iso-LSD by proton nuclear magnetic resonance (NMR). The C-9 resonance of LSD and iso-LSD appear as singlets at 6.35 and 6.27 ppm respectively. Starting with pure LSD, the conversion to iso-LSD is attained at temperatures above 37 degrees C and pH levels over 7.0. At a pH of 7.0 or higher, the LSD/iso-LSD ratio of 9:1 is achieved after one week at 45 degrees C or two weeks at 37 degrees C. Starting with iso-LSD, the conversion to LSD requires more vigorous conditions. The 9:1 LSD/iso-LSD ratio is attained only after 6 weeks at a temperature of 45 degrees C and a pH of 9.7. At lower pH levels, the reaction proceeds more slowly. The 9:1 LSD/iso-LSD ratio is achieved whether the starting material is LSD or iso-LSD and therefore represents an equilibrium concentration (K = 9). In addition, the more vigorous conditions needed to achieve equilibrium of iso-LSD to LSD demonstrate the difficulty in extraction of the epimerizable proton of iso-LSD. This study is the first to quantitate the epimerization of LSD by NMR techniques and establishes the conditions needed to induce epimerization in solution.     

Amylose Content and Chain Profile of Amylopectin from Normal,High Amylose and Waxy Barleys

The amylose content and the chain profile of amylopectin from normal, waxy and high amylose barley starches were determined after enzymatic debranching and gel permeation chromatography and the degree of branching of the amylopectin was analysed by 1H-n.m.r. spectroscopy. The normal barley starch contained around 30%, the high amylose around 40% and the waxy starch 9% amylose. The amylopectin of the high amylose starches had longer chains than those of the normal or waxy starches, especially in the molecular weight interval 5,400-8,000, but less of those below 2,400 in molecular weight. The chain length of amylopectin from high amylose barley was on average 5 units longer than those of normal or waxy barleys.     

Copolymers of 1,5-dioxepan-2-one and L- or D,L-dilactide: Hydrolytic degradation behavior

The degradation of two series of copolymers made of 1,5-dioxepan-2-one (DXO) and L -or D ,L -dilactide has been investigated. In vitro degradation of the six copolymers with different ratios of the ingoing components was followed using size exlusion chromatography (SEC), nuclear magnetic resonance (NMR) spectrometry, Fourier transform infrared (FTIR) spectroscopy, and differential scanning calorimetry (DSC). The copolymers with a high content of lactic acid units showed a higher rate of hydrolysis than the DXO-rich copolymers. The copolymer morphology also affects the rate of degradation as seen in the differences between amorphous and semicrystalline samples. The effect of electron beam sterilization was studied as well as the degradation products formed using the gas chromatography-mass spectrometry (GC–MS) technique. The major degradation products resulted from ester bond cleavage. Kinetics of the in vitro degradation indicate a complex hydrolysis, probably a mixture of an uncatalyzed and catalyzed mechanism. © 1994 John Wiley & Sons, Inc.     

Does waterborne citalopram affect the aggressive and sexual behaviour of rainbow trout and guppy?

Citalopram is one of several selective serotonin reuptake inhibitors (SSRIs) commonly found in treated sewage effluents. Accordingly, there are concerns about possible adverse effects of SSRIs on aquatic organisms, particularly behavioural effects similar to those associated with SSRI use in humans. Rainbow trout fry and adult male guppies were therefore exposed to waterborne citalopram, ranging from environmentally relevant to high concentrations (1, 10, 100 μg/L) for 3-7 days. Under these experimental conditions citalopram does not appear to cause significant effects on aggression in rainbow trout fry or on sexual behaviour in male guppies. This may be explained by a relatively low uptake of citalopram from water to fish.     

Cytolytic activities of IL-2 activated NK cells from MMTV/v-Ha-ras transgenic oncomice during tumor progression

IL-2 activated natural killer (A-NK) cells have the capacity to infiltrate metastatic tumors and lyse tumor cells. Nevertheless, adoptive immunotherapy with lymphokine-activated killer cells has been only modestly effective in the clinic and has not routinely provided long-term survival in patients with established cancer metastases. This may indicate the need for more carefully investigating the role of effector cells of the immune response, including A-NK cells, in models of tumor progression. Herein we describe the use of the MMTV/v-Ha-ras transgenic mouse model as a system for exploring the role of NK cells during tumor progression. We have examined the lytic capacity of A-NK cells generated from tumor-free and tumor-bearing transgenic oncomice against standard A-NK cell targets (YAC-1 and P815) in addition to tumor cells isolated from these animals. A-NK cells generated from mice without obvious tumor burden show higher lytic activity than A-NK cells generated from mice with evident tumors, i.e., those at a more advanced stage of tumor progression. Only long term (8-day) cultures of late passage A-NK cells generated from tumor-bearing mice showed significant increases in lytic activity over those generated from tumor-free mice. These results suggest that experimental protocols using transgenic oncomice at various stages of tumor growth may constitute a novel model for testing the role of A-NK cells for their capacity to interfere with cancer progression.