Fatal Attraction: How Bacterial Adhesins Affect Host Signaling and What We Can Learn from Them

The ability of bacterial species to colonize and infect host organisms is critically dependent upon their capacity to adhere to cellular surfaces of the host. Adherence to cell surfaces is known to be essential for the activation and delivery of certain virulence factors, but can also directly affect host cell signaling to aid bacterial spread and survival. In this review we will discuss the recent advances in the field of bacterial adhesion, how we are beginning to unravel the effects adhesins have on host cell signaling, and how these changes aid the bacteria in terms of their survival and evasion of immune responses. Finally, we will highlight how the exploitation of bacterial adhesins may provide new therapeutic avenues for the treatment of a wide range of bacterial infections.     

Structure of soya glycinin and conglycinin gels

Gels of glycinin and conglycinin formed at various heating temperatures, in the absence and presence of 0.2M sodium chloride were characterised by transmission electron microscopy. In distilled water both proteins formed gels consisting of strands with a thickness of 10–15 nm. The strands of glycinin were very regular and cross sections of strands showed a hollow cylindrical structure. In the presence of sodium chloride, glycinin formed an aggregated gel structure at 85°C, but at 95°C an ordered strand structure was formed. Dissociation of the quaternary structure on heating and reassociation of subunits into regular strands were considered the most probable mechanisms for strand formation from glycinin. The aggregated structure at 85°C was interpreted as a transient state prior to dissociation. Conglycinin rich gels were less regular and more crosslinked than gels of glycinin. Also, the strands of conglycinin showed a complex mode of aggregation possibly in the form of double spirals. The addition of sodium chloride caused a denser and more aggregated structure at 75 and 85°C, but the effects were not as drastic as in the case of glycinin. Heating temperature had only minor effects on the gel structure in the range studied.     

Nanomaterials based on phosphorus dendrimers

Dendrimers constitute an increasingly important field of research in chemistry for more than 15 years. After pioneering works concerning synthesis, the interest in dendrimers is now mainly driven by their properties and applications. This Account will emphasize the properties of a special class of dendrimers, that is, phosphorus-containing dendritic macromolecules, as tools for the elaboration of nanomaterials. Indeed, these dendrimers can be considered themselves as materials, or they can be used as an intrinsic constituent of a material or as a modifier of the surface of a material. In this latter case, a fundamental work about surfaces covalently modified by dendrimers recently opened the way to the elaboration of DNA chips.     

Mechanism for the reduction of NOx on Rh/sulfated titanias

Titanias of different surface areas have been sulfated and used as supports of Rh oxide for the selective catalytic reduction of nitrogen oxides. Only the sulfation of TiO₂ of large surface areas gives strong Br?nsted acid sites, retaining pyridine up to 773 K. Low surface area anatase is unable to retain sulfates. The catalytic activities measured at 523 K, increase with the number of acid sites, and then reach a plateau, showing the intervention of acidity in the SCR. This is true only for Rh but not for Pt. The investigation of the elemental steps on Rh/sulfated TiO₂ by in situ diffuse reflectance spectroscopy permits to clarify a few points: the oxidation of propene, presumably to acetaldehyde, occurs by the reaction with nitrates adsorbed on the support. The further oxidation of this intermediate by NO₂ yields an isocyanate, which can be hydrolysed to ammonia.     

Sodium Coordination Environments in Silica Films

The local structure centered on sodium after diffusion in silica (Na-SiO₂ samples) has been determined by means of extended X-ray absorption fine structure (EXAFS) studies. The Na-SiO₂ samples are of particular interest because (i) their sodium content can be varied over a wide range of concentration and (ii) their local structure is representative of that of soda–silica glass. EXAFS analyses reveal the existence of a well-defined local structure involving oxygen, sodium, and silicon neighbors. The Na-O, Na-Na, and Na-Si bonds lengths, which amount to 0.23, 0.30, and 0.38 nm, respectively, do not depend on sodium concentration. This environment closely resembles that found in soda–silica glass. Moreover, it is compatible with the "target site" and "the site memory effect" suggested by recent theories of the ionic conductivity in oxide glasses.     

Kinetics of the selective catalytic reduction of NO by NH3 on a Cu-faujasite catalyst

The kinetics of the selective catalytic reduction (SCR) of NO by NH₃ in the presence of O₂ has been studied on a 5.5% Cu-faujasite (Cu-FAU) catalyst. Cu-FAU was composed of cationic and oxocationic Cu species. The SCR was studied in a gas phase-flowing reactor operating at atmospheric pressure. The reaction conditions explored were: 458<T_R<513 K, 2503 (ppm) < 4000, 12 (%) < 4. The kinetic orders were 0.8–1 with respect to NO, 0.5–1 with respect to O₂, and essentially 0 with respect to NH₃. Based on these kinetic partial orders of reactions and elementary chemistry, a wide variety of mechanisms were explored, and different rate laws were derived. The best fit between the measured and calculated rates for the SCR of NO by NH₃ was obtained with a rate law derived from a redox Mars and van Krevelen mechanism. The catalytic cycle is described by a sequence of three reactions: (i) Cu^I is oxidized by O₂ to “Cu^II-oxo”, (ii) “Cu^II-oxo” reacts with NO to yield “Cu^II-N_xO_y”, and (iii) finally “Cu^II-N_xO_y” is reduced by NH₃ to give N₂, H₂O, and the regeneration of Cu^I (closing of the catalytic cycle). The rate constants of the three steps have been determined at 458, 483, and 513 K. It is shown that Cu^I or “Cu^II-oxo” species constitute the rate-determining active center.     

Single point incremental forming: state-of-the-art and prospects

Incremental sheet metal forming in general and Single Point Incremental Forming (SPIF) specifically have gone through a period of intensive development with growing attention from research institutes worldwide. The result of these efforts is significant progress in the understanding of the underlying forming mechanisms and opportunities as well as limitations associated with this category of flexible forming processes. Furthermore, creative process design efforts have enhanced the process capabilities and process planning methods. Also, simulation capabilities have evolved substantially. This review paper aims to provide an overview of the body of knowledge with respect to Single Point Incremental Forming. Without claiming to be exhaustive, each section aims for an up-to-date state-of-the-art review with corresponding conclusions on scientific progress and outlook on expected further developments.     

The effect of phone design on upper extremity discomfort and muscle fatigue

OBJECTIVE: To compare a small cellular clamshell phone with a traditional office phone in the development of discomfort and muscle fatigue over time during phone use. BACKGROUND: Phone use involves low-level static exertions that may be influenced by phone design. Phone design and its interactions with anthropometry may change shoulder and hand postures assumed during use, which in turn may modify the length-strength relationship and moment arms of the muscles. METHOD: Ten adults participated in a study that simulated phone use using a small clamshell and a traditional office phone. Discomfort information and electromyographic (EMG) muscle activity were monitored on four upper extremity muscles. Discomfort and fatigue data (EMG median frequency shifts) were analyzed to assess differences between phones as well as differing effects attributable to anthropometry. RESULTS: Median frequency shifts supported discomfort claims and indicated muscle fatigue in the deltoid and thenar muscles. Biomechanical measures demonstrated that participants with short limb lengths developed more severe signs of thenar fatigue. Participants with longer arms developed greater discomfort in the neck, shoulder, and back. The deltoid confirmed this occurrence, showing signs of muscle fatigue. CONCLUSION: Phone design and anthropometry influenced the development of discomfort and fatigue during phone use. Phone design dictated grip style, resulting in differing discomfort and fatigue levels. Anthropometry influenced the severity of the discomfort and fatigue present in the shoulder and hand. APPLICATION: Use of small clamshell phones may contribute to a lack of rest and recovery from typical workday exposures. It should be explored from an ergonomic perspective.     

The influence of lift frequency, lift duration and work experience on discomfort reporting

Discomfort surveys are commonly used to assess risk in the workplace and prioritize jobs for interventions before an injury or illness occurs. However, discomfort is a subjective measure and the relationship of discomfort to work-related factors is poorly understood. The objective of this study was to understand how reports of discomfort relate to work-related risk factors for the low back. A total of 12 novice and 12 experienced manual materials handlers performed repetitive, asymmetric lifts at different load levels and at six different lift frequencies throughout an 8-h exposure period. Discomfort was recorded hourly throughout the day. Analyses were performed to determine which experimental factors influenced reporting of discomfort and if discomfort trends matched spine loading trends. Novice lifters reported significantly higher discomfort levels than experienced subjects. They also reported increases in discomfort as moment exposure increased and as the exposure time increased. Novices lifting at 8 Nm load moment level reported increased discomfort from 0.07 to 0.63 by the end of the day, at 36 Nm they reported an increase from 0.04 to 0.40 and at 85 Nm they reported an increase from 0.37 to 3.06. Experienced subjects, on the other hand, reported low levels of discomfort regardless of moment exposure, lift frequency or exposure duration. The reported discomforts were generally unrelated to the biomechanical loading on the spine. Discomfort reporting appears to be more a reflection of experience than of work risk factor exposure. Experienced subjects may have more efficient motor patterns, which reduce spinal load and thus discomfort. Novice subjects seemed to have a lower threshold of discomfort. Caution is needed when using discomfort reporting as a means to identify jobs in need of interventions, in that biomechanical loading may not be accurately represented. Discomfort should only be used as a supplement to objective measures, such as spinal loading, to assess the risk of low back disorders.     

A Regularizing Method for Quantitative SPECT Reconstruction

The problem of successive transverse plane reconstruction in single photon emission computerized tomography (SPECT) is modeled in its more general form, which implies the definition of emission tomographic operators (ETO's) for which an analytical solution can be derived. The properties of the attenuated tomographic operator (ATO) are described and discussed, including the attenuation which is distributed on the reconstruction domain. For this particular operator, a regularizing method (RIM) is proposed, for which it is demonstrated and tested with simulation studies that a filtered, accurate solution can be extracted for the tomographic images as obtained using a single photon emission tomograph based on a rotating gamma camera in clinical use.