Fatal Attraction: How Bacterial Adhesins Affect Host Signaling and What We Can Learn from Them

The ability of bacterial species to colonize and infect host organisms is critically dependent upon their capacity to adhere to cellular surfaces of the host. Adherence to cell surfaces is known to be essential for the activation and delivery of certain virulence factors, but can also directly affect host cell signaling to aid bacterial spread and survival. In this review we will discuss the recent advances in the field of bacterial adhesion, how we are beginning to unravel the effects adhesins have on host cell signaling, and how these changes aid the bacteria in terms of their survival and evasion of immune responses. Finally, we will highlight how the exploitation of bacterial adhesins may provide new therapeutic avenues for the treatment of a wide range of bacterial infections.     

Structure of soya glycinin and conglycinin gels

Gels of glycinin and conglycinin formed at various heating temperatures, in the absence and presence of 0.2M sodium chloride were characterised by transmission electron microscopy. In distilled water both proteins formed gels consisting of strands with a thickness of 10–15 nm. The strands of glycinin were very regular and cross sections of strands showed a hollow cylindrical structure. In the presence of sodium chloride, glycinin formed an aggregated gel structure at 85°C, but at 95°C an ordered strand structure was formed. Dissociation of the quaternary structure on heating and reassociation of subunits into regular strands were considered the most probable mechanisms for strand formation from glycinin. The aggregated structure at 85°C was interpreted as a transient state prior to dissociation. Conglycinin rich gels were less regular and more crosslinked than gels of glycinin. Also, the strands of conglycinin showed a complex mode of aggregation possibly in the form of double spirals. The addition of sodium chloride caused a denser and more aggregated structure at 75 and 85°C, but the effects were not as drastic as in the case of glycinin. Heating temperature had only minor effects on the gel structure in the range studied.     

Fungizide und bakterizide Anstrichmittel — neue Wirkstoffe für Öl- und Kunstharz-Lacke

Fungicidal and Bactericidal Paints — New Additives for the Oil and Synthetic Resin Lacquers New fungicides, which replace completely the mercury additives in oil, alkyd and synthetic resin lacquers, were developed. In contrast to the mercury additives, they can also be used in the stoving lacquers. They are only of limited use in insulating varnishes. The experience with these additives in different lacquer systems is reported. A combined testing method can give a practicable judgement about the fungicidal activity of such paints in a short time.     

Nanomaterials based on phosphorus dendrimers

Dendrimers constitute an increasingly important field of research in chemistry for more than 15 years. After pioneering works concerning synthesis, the interest in dendrimers is now mainly driven by their properties and applications. This Account will emphasize the properties of a special class of dendrimers, that is, phosphorus-containing dendritic macromolecules, as tools for the elaboration of nanomaterials. Indeed, these dendrimers can be considered themselves as materials, or they can be used as an intrinsic constituent of a material or as a modifier of the surface of a material. In this latter case, a fundamental work about surfaces covalently modified by dendrimers recently opened the way to the elaboration of DNA chips.     

Sodium Coordination Environments in Silica Films

The local structure centered on sodium after diffusion in silica (Na-SiO₂ samples) has been determined by means of extended X-ray absorption fine structure (EXAFS) studies. The Na-SiO₂ samples are of particular interest because (i) their sodium content can be varied over a wide range of concentration and (ii) their local structure is representative of that of soda–silica glass. EXAFS analyses reveal the existence of a well-defined local structure involving oxygen, sodium, and silicon neighbors. The Na-O, Na-Na, and Na-Si bonds lengths, which amount to 0.23, 0.30, and 0.38 nm, respectively, do not depend on sodium concentration. This environment closely resembles that found in soda–silica glass. Moreover, it is compatible with the "target site" and "the site memory effect" suggested by recent theories of the ionic conductivity in oxide glasses.     

Optimality criteria for the components of anisotropic constitutive matrix

In a free material formulation, the problem of minimizing a weighted sum of compliance’s from multiple load cases, subject to an active constraint on material volume, is solved in a formulation with two optimality criteria. The first optimality criterion for the distribution of material volume densities is equal value for the weighted elastic energy densities, as a natural extension of the optimality criterion for a single load case. The second optimality criterion for the components of a constitutive matrix (of unit norm) is proportionality to corresponding weighted strain components with the same proportionality factor \(\widehat \lambda \) for all the components, as shortly specified by \(C_{i j k l} = \widehat \lambda \sum _{n} \eta _{n} (\epsilon _{i j})_{n} (\epsilon _{k l})_{n}\) , in traditional notation (n indicate load case). These simple analytical results should be communicated, in spite of the practical objection against design for weighted sum of compliance’s, as compared to worst case design and design considering strength. The application of the approach of the two optimality criteria is illustrated by a 2D example with 8 load cases. Stable and fast convergence is shown.     

Determination of local hydrodynamic parameters in bubble columns by the electrodiffusion method with oxygen as depolarizer

An electrodiffusional three-segment probe was developed with which local axial and radial liquid velocities can be determined. Application of this probe in gas-liquid flow yields information on local gas hold-up. In coalescing media the commonly used redox-system Fe(CN) ₆ ³⁻ /Fe(CN) ₆ ⁴ should be replaced by dissolved oxygen as depolarizer. Measurements of local axial and radial liquid velocity and turbulence intensity in different bubble columns (D = 150 and 600 mm) showed good agreement with data obtained by hotfilm anemometry. This paper was presented at the International Workshop on Electrodiffusion Diagnostics of Flows held in Dourdan, France, May 1993.     

Single point incremental forming: state-of-the-art and prospects

Incremental sheet metal forming in general and Single Point Incremental Forming (SPIF) specifically have gone through a period of intensive development with growing attention from research institutes worldwide. The result of these efforts is significant progress in the understanding of the underlying forming mechanisms and opportunities as well as limitations associated with this category of flexible forming processes. Furthermore, creative process design efforts have enhanced the process capabilities and process planning methods. Also, simulation capabilities have evolved substantially. This review paper aims to provide an overview of the body of knowledge with respect to Single Point Incremental Forming. Without claiming to be exhaustive, each section aims for an up-to-date state-of-the-art review with corresponding conclusions on scientific progress and outlook on expected further developments.