Evaluation of direct light processing for the fabrication of bioactive ceramic scaffolds: Effect of pore/strut size on manufacturability and mechanical performance

Bioactive ceramic scaffolds for bone regeneration consisting of a three-dimensional mesh of interpenetrating struts with square section were fabricated via Digital Light Processing (DLP). The ability of the technique to manufacture 3D porous structures from β-tricalcium phosphate (β-TCP) powders with different dimensions of struts and pores was evaluated, identifying the possibilities and limitations of the manufacturing process. Small pore sizes were found to seriously complicate the elimination of excess slurry from the scaffold’s innermost pores. The effect of the strut/pore size on the mechanical performance of the scaffolds under compressive stresses was also evaluated, but no significant influence was found. Under compressive stresses, the structures resulted weaker when tested perpendicularly to the printing plane due to interlayer shear failure. Interlayer superficial grooves are proposed as potential failure-controlling defects, which could also explain the lack of a Weibull size effect on the mechanical strength of the fabricated DLP scaffolds.     

Context-Processing Deficits in Schizotypal Personality Disorder.

Research suggests that schizotypal personality disorder (SPD) is a part of the spectrum of schizophrenia-related illnesses. This article hypothesizes that a deficit in the representation and maintenance of context is a core cognitive disturbance in schizophrenia and that SPD individuals should demonstrate context-processing deficits. To test this hypothesis, the authors administered 3 versions of their AX-CPT task, designed to assess context processing, to 35 healthy controls and 26 individuals with DSM-IV SPD. They also administered working memory and selective attention tasks. SPD individuals displayed context representation deficits similar to those found in schizophrenia but did not show the same additional deficits in context maintenance. Context processing was strongly associated with working memory and selective attention performance in the SPD individuals. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A New Tool to Study Parkinsonism in the Context of Aging: MPTP Intoxication in a Natural Model of Multimorbidity

The diurnal rodent Octodon degus (O. degus) is considered an attractive natural model for Alzheimer’s disease and other human age-related features. However, it has not been explored so far if the O. degus could be used as a model to study Parkinson’s disease. To test this idea, 10 adult male O. degus were divided into control group and MPTP-intoxicated animals. Motor condition and cognition were examined. Dopaminergic degeneration was studied in the ventral mesencephalon and in the striatum. Neuroinflammation was also evaluated in the ventral mesencephalon, in the striatum and in the dorsal hippocampus. MPTP animals showed significant alterations in motor activity and in visuospatial memory. Postmortem analysis revealed a significant decrease in the number of dopaminergic neurons in the ventral mesencephalon of MPTP animals, although no differences were found in their striatal terminals. We observed a significant increase in neuroinflammatory responses in the mesencephalon, in the striatum and in the hippocampus of MPTP-intoxicated animals. Additionally, changes in the subcellular expression of the calcium-binding protein S100β were found in the astrocytes in the nigrostriatal pathway. These findings prove for the first time that O. degus are sensitive to MPTP intoxication and, therefore, is a suitable model for experimental Parkinsonism in the context of aging.     

NO reduction by CH4 over Pd/Co-sulfated zirconia catalysts

A series of sulfated zirconia supported Pd/Co catalysts was synthesized by the sol–gel method and examined for NO_x reduction by methane. The NO conversion increased up to a Co/S ratio of 0.43, and then decreased at a higher Co loading (Co/S = 0.95). Sulfate content was also essential for obtaining high selectivity to molecular nitrogen. A catalyst loaded with 0.06 wt.% Pd, 2.1 wt.% Co and 2.1 wt.% S (Pd/Co-SZ-2) exhibited remarkable performance under lean conditions and displayed stability in a long-term durability test using a synthetic reaction mixture containing 10% water vapor. This catalyst exhibited the highest sulfur retention most probably as cobalt sulfide. Besides, the catalytic oxidation of NO to NO_y groups was confirmed by FT-IR, in agreement with the general mechanism for the SCR of NO by hydrocarbons. In the absence of oxygen in the feed stream, the catalyst was highly active for NO reduction with methane. IR stretching bands assigned to N₂O and adsorbed nitro groups were identified upon adsorbing NO on Pd/Co-SZ-2. This indicates that under rich conditions disproportionation of NO to N₂O and NO₂ occurs and confirms that the formation of NO₂ species is an essential step for NO reduction by CH₄.     

Stress Analysis of Elastic-Plastic Contact Damage in Ceramic Coatings on Metal Substrates

An elastic-plastic analysis of damage in ceramic coatings on metal substrates from contacts with spherical indenters is made using finite element modeling. Computations are carried out specifically for plasma-sprayed alumina:titania on a soft steel. The algorithm assumes an elastic sphere with frictionless contact on a flat elastic-plastic layered specimen, and incrementally evaluates the expanding contact field as a function of applied load. Two key aspects of the contact field are examined: (i) the indentation stress-strain curve; (ii) the damage zone geometry. Composite coating/substrate indentation stress-strain curves are computed for two coating thicknesses, using input material parameters from iterative fits to data from control tests on free-standing coating and substrate materials. Contours of principal shear stresses, most notably those contours corresponding to yield zone boundaries in both the softer substrate and the harder coating, are mapped out in the fully plastic region. Corresponding distributions of tensile stresses are also mapped out, and are shown to correlate with the locations of transverse fractures in the coating. General implications concerning material and geometrical design of ceramic-based layer structures are discussed.     

Combustion of methane over palladium ZSM-5 and mordenite catalysts

The effect of Pd-loading on Pd-NaZSM-5 and Pd-NaMordenite catalysts prepared by ion exchange was studied for methane combustion with excess oxygen (1% CH₄, 18% O₂, balance N₂) in the temperature range 40–500°C. Fresh and calcined samples (3 h, 450°C) showed methane conversions proportional to Pd-loading on Pd-NaZSM-5 catalysts, while conversions decreased with Pd-loading on calcined Pd-NaMordenite catalysts. TOF (number of methane molecules converted per second per Pd²⁺ ion) for over exchanged Pd-NaZSM5-116 was low as compared to under exchanged Pd-NaZSM5-80 and Pd-NaZSM5-58 samples. Close TOF's were found for the last two samples at 330°C. TOF differences in Pd-NaMordenite catalysts demonstrate the heterogeneity of Pd⁺² sites due to structurally nonidentical locations of cations. TOF's appear to be related to Na/Pd ratios in both catalyst types. Apparent activation energies for Pd-NaZSM-5 materials are higher than those for Pd-NaMordenite catalysts.     

Network views for personalized medicine

Clinical Proteomics has traveled a long way pinpointing potential biomarkers for a variety of diseases. However, the absence of clinical implementation of proteomics findings has led to a frank evaluation and reconsideration of applied practices in biomarker discovery, recruitment of technological tools for biomarker verification and generation of new guidelines for data reporting. Nevertheless, considering the need for vast clinical resources for biomarker validation, the frequent lack of clear definitions of contexts of use, in combination to the biomarker “high offer,” progress toward biomarker implementation will even more require the adoption of an extensive open-minded approach: disease-focused networks are needed to ensure rapid exchange of information, initiation of appropriate studies, parallel validation of multiple biomarkers and sharing of valuable clinical resources. This viewpoint article targets to reflect on these issues and advocates the added value of multidisciplinary networks in biomarker development using bladder cancer as a paradigm.     

Clinical applications of capillary electrophoresis coupled to mass spectrometry in biomarker discovery: Focus on bladder cancer

A major requirement in the application of proteins as clinical biomarkers is that they provide a highly sensitive and specific result in disease assessment. Since single biomarkers are generally of limited accuracy, a group or panel of well-characterized biomarkers appears appropriate, providing a more robust and sensitive MS-based analytical platform. CE coupled to MS has been successfully used in biomarker discovery and application, as it enables the selective detection of peptides and small proteins, combining the high separation capacity of CE with the advanced sensitivity of MS. CE-MS allows the characterization of highly complex samples (such as urine, plasma, and other biofluids) in a consistent and reproducible way. It has a range of applications, many focusing especially in studies on urinary peptide biomarkers in kidney and cardiovascular diseases. Another major field of interest has been malignancy of the genitourinary system. In the first part of this review, we cover technical aspects and performance characteristics of CE-MS, with special focus on the requirements for biomarker discovery and clinical application. In the second part, we review the potential and development of CE-MS in the management of genitourinary cancers, especially bladder cancer. CE-MS has been employed in several studies aimed at discovering biomarkers for bladder cancer that may be useful in diagnosis, monitoring for recurrence, and prediction of the risk for the muscle-invasive stage. In the last part of the review, we discuss current challenges and provide an outlook for ongoing and possible future developments.