Use of inverse gas chromatography to quantify interactions in amine cured epoxy resins

Flory–Huggins interaction parameters, λ, were determined for a series of probes in an amine cured epoxy resin matrix (433–493 K) and its precursors (324–363 K) by inverse gas chromatography (IGC). Hildebrand–Scatchard theory was combined with Flory–Huggins theory in order to estimate infinte dilution solubility parameters (δ₂) for the matrix and its precursors at 298 K. It was shown that the value of the solubility parameter for the cured resin matrix lies between those of its precursors. Compared to the majority of published work, an unusual aspect of this application of IGC is that solubility parameters have been determined when the stationery phases are (i) small molecules and (ii) a highly crosslinked polymer. Moreover, all possible attempts have been made to ensure equilibrium conditions between probe and stationary phase, and compensation for asymmetry of peak profile has been applied in determining δ₂. The solubility parameters estimated by IGC are in good agreement with those calculated by other methods.     

Methane/natural gas storage and delivered capacity for activated carbons in dry and wet conditions

Methane/natural gas storage and delivered capacity for three different activated carbons in dry and wet conditions were measured. In all tests the temperature of the bed was maintained constant at 277.15 K and pressure was increased up to 10 MPa. Natural gas storage capacity was less than methane storage capacity in dry conditions for all the three activated carbons tested, while the gas delivery was almost the same. One of activated carbon tested (NC120) showed the possibility of hydrate forming for pressures higher than 4 MPa but the amount of gas stored still was less than the amount stored in dry conditions over the whole range of pressure. The analysis of the gas delivered at each pressure steps shows that considerable amount of heavy components do not come out from the bed even at very low pressures in both dry and wet condition tests. Repeatability of the sorption/desorption processes - vital for possible commercial/industrial use - has been examined over various cycles.     

Insulin effects on CYP2E1, 2B, 3A, and 4A expression in primary cultured rat hepatocytes

Although hyperketonemia and/or altered growth hormone secretion caused by diabetes have been implicated in enhanced CYP2E1, 2B, 3A and 4A expression, the effect of insulin on hepatic P450 expression, in the absence of associated metabolic/hormonal alterations, remains unknown. Primary cultured rat hepatocytes have been shown (Zangar et al., Drug Metab. Dispos., 23:681, 1995) to express stable and inducible CYP2E1 mRNA and protein levels, and provide an excellent system for mechanistic examination of the effect of insulin on CYP2E1, 2B, 3A and 4A expression. Maintaining primary rat hepatocytes in culture in the absence of insulin for 48, 72, or 96 h increased CYP2E1 mRNA levels 5-, 11-, and 4-fold, respectively, relative to cells maintained in the presence of the standard concentration of 1 microM insulin. In contrast, CYP2B mRNA levels increased only approximately 2-fold in the absence of insulin, when compared with the presence of 1 microM insulin. CYP2E1 and 2B protein levels were increased 6.7- and 3.8-fold, respectively, in cells cultured for 96 h in the absence of insulin as compared with those cultured in medium containing 1 microM insulin. Concentration-response studies revealed that decreasing the concentration of insulin below 10 nM (i.e. 1 nM, 0.1 nM, no insulin) increased CYP2E1 mRNA levels 4-, 7-, and 11-fold, respectively. In contrast, no such concentration-dependence was observed for CYP2B mRNA expression. As CYP3A and 4A expression is also elevated in diabetic rats, the effects of insulin on these P450s was also examined. CYP3A mRNA levels were unaltered and CYP4A mRNA levels were decreased marginally (approximately 50%) by the absence of insulin relative to levels in cells cultured in the presence of 1 microM insulin over 96 h in culture. The results of this study provide evidence that insulin itself, in the absence of other diabetes-induced metabolic or hormonal alterations, affects CYP2E1 and 2B, but not CYP3A or 4A, expression in primary cultured rat hepatocytes. Furthermore, CYP2E1 expression is differentially regulated by insulin relative to CYP2B, 3A or 4A. This study also demonstrates that decreasing the concentration of insulin in the culture medium provides a method by which CYP2E1 levels can be increased in primary cultured hepatocytes to facilitate mechanistic studies on the regulation of CYP2E1 expression.     

Dewatering of Sewage Sludge

Dewatering of sewage sludges is usually carried out using belt filter presses or centrifuges. The ability to remove water from sludges by mechanical dewatering is a property of both the sludge and the equipment used for dewatering. Newer high-solids centrifuges can remove more water than a belt press but require a higher chemical conditioning dose. The Gt value, the product of the mean velocity gradient and the shear time, has been found to be a useful parameter for characterizing the shear in mechanical dewatering equipment. Dewatering can be considered a two-step process, filtration followed by expression. The expression step is the most important of these and the benefits of various sludge processing techniques and conditioning chemical types remains a fruitful area of research.     

Influence of thickness and processing history on fatigue fracture of nylon 66. Part II: Crack tip morphology

Fatigue crack propagation rates in injection molded nylon 66 were previously shown to be strongly affected by prior processing history. To provide a physical basis for the observed acceleration in crack growth rates, microtomed sections were cut through the tips of stable fatigue cracks and examined by optical microscopy. A reduction in spherulite size occurs with reprocessing along with an accompanying decrease in the amount of deformation at the crack tip. For the initially processed nylon 66 this deformation consists of a vast array of independently initiated craze-like zones. Patchy type regions observed on the fatigue fracture surface are similar in size to the initially formed crazed zones. Crack advance occurs by the breakdown and coalescence of the crazed regions via matrix shearing. The extensive damage zone is believed to result in a reduction in stress intensity at the crack tip thereby reducing the crack propagation rates. For the reprocessed nylon 66, one observes fewer crazes and a sharper fatigue crack tip with a consequent acceleration in crack propagation rates and a smoother fracture surface.     

Robust Kalman filtering for nonlinear multivariable stochastic systems in the presence of non‐Gaussian noise

The presence of outliers can considerably degrade the performance of linear recursive algorithms based on the assumptions that measurements have a Gaussian distribution. Namely, in measurements there are rare, inconsistent observations with the largest part of population of observations (outliers). Therefore, synthesis of robust algorithms is of primary interest. The Masreliez–Martin filter is used as a natural frame for realization of the state estimation algorithm of linear systems. Improvement of performances and practical values of the Masreliez‐Martin filter as well as the tendency to expand its application to nonlinear systems represent motives to design the modified extended Masreliez–Martin filter. The behaviour of the new approach to nonlinear filtering, in the case when measurements have non‐Gaussian distributions, is illustrated by intensive simulations. Copyright © 2015 John Wiley & Sons, Ltd.     

Technique for accurate stellar polarimetry using CCD cameras

Using a technique for CCD polarimetry, we have obtained stellar polarization data with the 0.9-m telescope on Kitt Peak and with the Tek 2048 CCD camera. Measurements of stars viewed through holes in polarizing filters serve to correct for variations in atmospheric transparency. For the brightest stars the uncertainties in the measured polarization during a single, hour-long, polarimetric sequence are 0.3-0.5%, because of the residual effects of the variations in transparency. For fainter stars we are Poisson noise limited. Our technique provides some advantages over other techniques for CCD polarimetry, primarily because it can be easily integrated into existing photometric systems.