Thermal characteristics and temperature profile changes of structurally different polyethylenes with peroxide modifications

Crosslinking and processing characteristics of polyethylenes (PEs) with different molecular architectures, namely high‐density polyethylene (HDPE), linear low‐density polyethylene (LLDPE), and low‐density polyethylene (LDPE), were studied with regard to the effects of peroxide modifications and coolant flow rates. Dicumyl peroxide (DCP) and di‐tert‐butyl peroxide (DTBP) were used as free‐radical inducers for crosslinking the PEs. The characteristics of interest included normalized gel content, real‐time temperature profiles and their cooling rates, exothermic period, crystallinity level, crystallization temperature, and heat distortion temperature. The experiments showed that LDPE exhibited the highest normalized gel content. The real‐time cooling rates, taken from the temperature profiles for all PEs before the crystallization region, were greater than those after the crystallization region. The cooling rate of the PEs increased with the presence of DCP, whereas the crystallization temperature of the PEs was lowered. The HDPE appeared to show the longest exothermic period as compared with those of the LLDPE and LDPE. The exothermic period showed an increase with increasing coolant flow rate, but it was decreased by the use of DCP. As for the effect of peroxide type, the gel content and cooling rate of the PE crosslinked by DCP were higher than those for the PE crosslinked by DTBP. The DTBP was the more effective peroxide for introducing crosslinks and simultaneously maintaining the crystallization behavior of the PE. J. VINYL ADDIT. TECHNOL., 20:80‐90, 2014. © 2014 Society of Plastics Engineers     

Low-temperature particle synthesis of titania/silica/natural rubber composites for antibacterial properties

Composite particles of titania/silica/natural rubber (TiO₂/SiO₂/NR) were prepared and evaluated for their potential antibacterial application. All processes were restricted to a low temperature or a small heating contact time to avoid degradation of the NR. The primary NR particles were synthesized by spray drying and then SiO₂ and TiO₂ were incorporated sequentially by chemical vapor deposition and liquid phase deposition, respectively. The physical and chemical properties were characterized by X-ray diffractometry, scanning electron microscopy with energy dispersive X-ray spectrometry, Fourier-infrared spectroscopy and thermogravimetric analyses. The TiO₂/SiO₂/NR composite particles had a spherical shape with a diameter of about 10 μm, with titania on the outer layer, and showed an effective antibacterial activity of a 99.99% reduction in viable Escherichia. coli and Staphylococcus aureus within 20 min of exposure under fluorescent light. In addition, the particles could be reused with the same level of antibacterial activity for up to three cycles. The structural and antibacterial models of the composite particles are proposed in this work.     

Assessment and characterization of antifungal and antialgal performances for biocide‐enhanced linear low‐density polyethylene

In this work, four biocides were used for the purpose of growth inhibition of fungi and algae in linear low‐density polyethylene (LLDPE) specimens. Benzimidazol‐2‐yl‐carbamicacid methyl ester [carbendazim (CB)], 5‐chloro‐2‐(2,4‐dichlorophenoxy)phenol [triclosan (TS)], and 3‐iodo‐2‐propynyl N‐butylcarbamate [iodopropynyl butylcarbamate (IPBC)] were used as antifungal agents, and 2‐methylthio‐4‐ethylamino‐6‐tert‐butylamino‐triazin‐1,3,5 [terbutryn (TT)] was used as an antialgal agent. Antifungal performance was evaluated by disk diffusion and dry weight techniques, and antialgal activities were carried out by disk diffusion and chlorophyll A methods. Aspergillus niger TISTR 3245 and Chlorella vulgaris TISTR 8580 were used as the testing fungus and alga, respectively. The experimental results suggested that the wettabilities of LLDPE specimens changed with the incorporation of CB, TS, IPBC, and TT biocides without significant changes in chemical structures and mechanical properties of the LLDPE. IPBC with the recommended content of 10,000 ppm was found to give the most satisfactory growth inhibition of A. niger. Antifungal performance evaluations were dependent on the testing methods used, whereas those for antialgal activity were not. The optimum concentration of TT agent for effective killing of C. vulgaris was 750 ppm; this loading could be reduced from 750 to 250 ppm by the addition of either TS or IPBC agent. TS and IPBC could be used as antialgal promoters in the LLDPE specimens. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2013     

Scientific evaluations of citation quality of international research articles in the SCI database: Thailand case study

Summary Quantitative and qualitative scientific evaluations of the research performance of Thai researchers were carried out with regards to their international publications and citations in four different subject categories; namely Clinical Medicine, Chemistry, Material Sciences, and Engineering. This work used citations to publications of Thai researchers in the Science Citation Index (SCI) database during 1998-2002 as a data source. The calculations and comparisons of article impact factors (AIF), position impact factors (PIF) and journal impact factors (JIF) were attempted for quantitative evaluation.The positions and significance levels (cited contents) of the citations were considered for qualitative assessment.For quantitative evaluation, the highest article quantity and number of times cited were given by Thai researchers in Clinical Medicine, the lowest being for Material Sciences. Clinical Medicine had the highest AIF value, while Engineering exhibited the lowest. Each article by Thai researchers was found to be cited more than once within a citing article, especially articles in Clinical Medicine. For qualitative assessment, most articles from Thai scholars were cited in Introduction and Results & Discussion sections of the citing articles. Only non-Thai researchers in Clinical Medicine preferred to use Discussion from Thais' articles for discussion of their work whereas those in Chemistry, Material Sciences and Engineering were referred as general references. Less than 1.5% of research works of Thai scholars were cited as “the pioneer”for the research communities of the subject categories of interest.     

Effects of wood constituents and content,and glass fiber reinforcement on wear behavior of wood/PVC composites

In flooring applications, experimental data and insight from scientific investigations on wear properties of wood/polymer composites (WPCs) are important for engineers to understand how to design and formulate WPC materials with high resistance to wear. In this work, three different types of wood flour – namely Xylia kerrii Craib & Hutch., Hevea brasiliensis Linn., and Mangifera indica Linn. – were utilized and incorporated into poly(vinyl chloride) (PVC) with a fixed content (10 phr) of E-chopped strand glass fiber. The physical, mechanical and wear properties, in terms of specific wear rate, were then assessed as a function of wood content and sliding distance. The experimental results suggested that the addition of wood flour increased the flexural modulus and strength up to 40 phr; beyond this concentration, the flexural properties decreased. Hardness was not affected by the addition of wood flour. The mechanical and wear properties of WPVC composites were found to improve with the addition of the E-glass fiber. Xylia kerrii Craib & Hutch. wood exhibited the lowest specific wear rate for non-reinforced WPVC composites, whereas Hevea brasiliensis Linn. wood showed the lowest specific wear rate for the glass fiber reinforced WPVC composites. The longer the sliding distance, the greater the specific wear rate in all cases.     

Mechanical and morphological properties for sandwich composites of wood/PVC and glass fiber/PVC layers

This work manufactured sandwich composites from glass fiber/poly(vinyl chloride) (GF/PVC) and wood/PVC layers, and their mechanical and morphological properties of the composites in three GF orientation angles were assessed. The effects of K value (or viscosity index) of PVC and Dioctyl phthalate (DOP) loading were of our interests. The GF/PVC was used as core layer whereas wood/PVC was the cover layers. The experimental results indicated that PVC with low K value was recommended for the GF/PVC core layer for fabrication of GF/WPVC sandwich composites. The improvement of PVC diffusion at the interface between the GF and the PVC core layer was obtained when using PVC with K value of 58. This was because it could prevent de‐lamination between composite layers which would lead to higher mechanical properties of the sandwich composites, except for the tensile modulus. The sandwich composites with 0° GF orientation possessed relatively much higher mechanical properties as compared with those with 45° and 90° GF orientations, especially for the impact strength. Low mechanical properties of the sandwich composites with 45° and 90° GF orientation angles could be overcome by incorporation of DOP plasticizer into the GF/PVC core layer with the recommended DOP loadings of 5–10 parts per hundred by weight of PVC components. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Aromatization of light paraffins over Ga-containing MFI-type catalyst

Aromatization of light paraffins such as propane and butane was investigated on MFI-type catalysts containing Ga as an active component. Even with less amount of Ga loading, Ga ion-exchanged MFI exhibited higher selectivity for aromatics, mainly benzene, toluene and xylene (BTX), than that of H-Ga-Silicate. This may be attributed to the presence of Al in Ga ion-exchanged MFI which increases the catalyst acidity. Further development was done by preparing H-Ga, Al-bimetallosilicate with the purpose of minimizing the catalyst preparation procedure. It has been found that H-Ga, Al-bimetallosilicate having Si/Ga ratio of 155 and Si/Al ratio of 40 exerted considerably high selectivity for aromatics, ca. 64% for BTX. This selectivity was comparable to that of H-Ga ion-exchanged MFI with the same amount of Ga loading. However, the bimetallosilicate catalyst can be prepared in only one step crystallization, which minimizes the catalyst preparation procedure. This paper was presented at the 8th APCChE (Asia Pacific Conferation of Chemical Engineering) Congress held at Seoul between August 16 and 19, 1999.     

Facile preparation of polybenzoxazine-based carbon microspheres with nitrogen functionalities: effects of mixed solvents on pore structure and supercapacitive performance

In this study, polybenzoxazine (PBZ)-based carbon microspheres were prepared via a facile method using a mixture of formaldehyde (F) and dimethylformamide (DMF) as the solvent. The PBZ microspheres were successfully obtained at the F/DMF weight ratios of 0.4 and 0.6. These microspheres exhibited high nitrogen contents after carbonization. The microstructures of all the samples showed an amorphous phase and a partial graphitic phase. The porous carbon with the F/DMF ratio of 0.4 showed significantly higher specific capacitance (275.1 F∙g^‒1) than the reference carbon (198.9 F∙g^‒1) at 0.05 A∙g^‒1. This can be attributed to the synergistic electrical double-layer capacitor and pseudo-capacitor behaviors of the porous carbon with the F/DMF ratio of 0.4. The presence of nitrogen/oxygen functionalities induced pseudo-capacitance in the microspheres, and hence increased their total specific capacitance. After activation with CO₂, the specific surface area of the carbon microspheres with the F/DMF ratio of 0.4 increased from 349 to 859 m²∙g^‒1 and the specific capacitance increased to 424.7 F∙g^‒1. This value is approximately two times higher than that of the reference carbon. The results indicated that the F/DMF ratio of 0.4 was suitable for preparing carbon microspheres with good supercapacitive performance. The nitrogen/oxygen functionalities and high specific surface area of the microspheres were responsible for their high capacitance.     

Analysis of VNIR (400–1100 nm) spectral signatures for estimation of soil organic matter in tropical soils of Thailand

The widely available laboratory spectrometers detect targets at spectral regions restricted to visible and near-infrared (VNIR). The spectral response of soils in this region is predominantly featureless and obstructs the exploitation of absorption features as diagnostic criterion. In this study, polynomial based modelling was developed as an alternative method of estimating soil organic matter (OM) from VNIR spectral region. Forty-one core samples, collected from Lop Buri, Thailand, were subjected to chemical and radiometric analysis. Computations were made across four categories of synthesized bandwidths. The selection procedure identified bands at 960, 1100 and 520?nm as OM sensitive. The widening interval of bandwidth has corresponded with diminishing predictive power, termed ‘bandwidth decay effect’. The use of polynomial models and their validations showed a higher performance than the analysis made with multiple regressions analysis. The polynomial based approach offers a fresh opportunity for modelling other non-photoactive soil nutrient parameters. Furthermore, it may form the basis for integration of spectrometers and satellite sensors, aimed at mapping of non-vegetated soils.