Assessment of the Use of NaClO as an Alternative to H2O2 in the Oxidant-Titanium Ore-Simulated Solar Light System for Thiabendazole Degradation

Topics in Catalysis - The use of the magnetic fraction (MF) of a low-grade titanium ore (TO) and two oxidants (H2O2 and NaClO), testing each one separately, were compared in photo-Fenton like...     

Air entrainment on a moving continuous web

The air boundary layer on a moving continuous web was experimentally investigated in a laboratory coating equipment. The boundary layer thickness was obtained by smoke visualization and measured by image analysis in the range 2.4×10⁴<Re<3×10⁵. According to the web speed, three laminar flow mechanisms were observed, for which the air boundary layer thickness was found to vary from 0.74 to . A survey of the published boundary layer solutions for a moving flat surface was also carried out and their applicability to the present boundary layer problem was studied. It was shown that the Blasius solution is the most suitable to represent the air flow in the case of a moving web.     

Can Human Oral Mucosa Stem Cells Differentiate to Corneal Epithelia?

Human oral mucosa stem cells (hOMSCs) arise from the neural crest, they can self-renew, proliferate, and differentiate to several cell lines and could represent a good source for application in tissue engineering. Because of their anatomical location, hOMSCs are easy to isolate, have multilineage differentiation capacity and express embryonic stem cells markers such as—Sox2, Oct3/4 and Nanog. We have used SHEM (supplemented hormonal epithelial medium) media and cultured hOMSCs over human amniotic membrane and determined the cell’s capacity to differentiate to an epithelial-like phenotype and to express corneal specific epithelial markers—CK3, CK12, CK19, Pan-cadherin and E-cadherin. Our results showed that hOMSCs possess the capacity to attach to the amniotic membrane and express CK3, CK19, Pan-Cadherin and E-Cadherin without induction with SHEM media and expressed CK12 or changed the expression pattern of E-Cadherin to a punctual-like feature when treated with SHEM media. The results observed in this study show that hOMSCs possess the potential to differentiate toward epithelial cells. In conclusion, our results revealed that hOMSCs readily express markers for corneal determination and could provide the ophthalmology field with a therapeutic alternative for tissue engineering to achieve corneal replacement when compared with other techniques. Nevertheless, further studies are needed to develop a predictable therapeutic alternative for cornea replacement.     

Analysis of the biomineralization process on SWNT-COOH and F-SWNT films

In vitro biomineralization process was investigated on functionalized single wall nanotube (SWNT) films. The films were prepared by solvent casting method by using carboxylated and fluorinated nanotubes. SWNT films were characterized by means of electron microscopy, contact angle measurements and optical absorption. The in vitro assays were performed on cultured human alveolar bone-derived cells (HABDC) to determine the capabilities of carboxylated single-walled nanotubes (SWNTs-COOH) and fluorinated single-walled nanotubes (F-SWNTs) to promote the deposit of mineral-like tissue. The results showed that the cellular response of HABDC in secreting a mineralized extracellular matrix and their consequent mineralization is dependent on the degree of functionalization of the SWNTs. Differences were found related to the kind of sidewall functionalization. Both structures promoted hydroxyapatite formation, however, calcium uptake on SWNTs-COOH increased and it was related to crystal density. From our results, it is possible to infer that CNT functionalization opens a path to future developments in new bone graft materials and techniques.     

Decomposition of repetition priming processes in word translation.

Translation in fluent bilinguals requires comprehension of a stimulus word and subsequent production, or retrieval and articulation, of the response word. Four repetition-priming experiments with Spanish–English bilinguals (N = 274) decomposed these processes using selective facilitation to evaluate their unique priming contributions and factorial combination to evaluate the degree of process overlap or dependence. In Experiment 1, symmetric priming between semantic classification and translation tasks indicated that bilinguals do not covertly translate words during semantic classification. In Experiments 2 and 3, semantic classification of words and word-cued picture drawing facilitated word-comprehension processes of translation, and picture naming facilitated word-production processes. These effects were independent, consistent with a sequential model and with the conclusion that neither semantic classification nor word-cued picture drawing elicits covert translation. Experiment 4 showed that 2 tasks involving word-retrieval processes—written word translation and picture naming—had subadditive effects on later translation. Incomplete transfer from written translation to spoken translation indicated that preparation for articulation also benefited from repetition in the less-fluent language. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Pectin‐based films produced by electrospraying

Electrospraying technique was used for the production of pectin films obtaining transparent and flexible products with thicknesses of 23.4 ± 3.04 µm and requiring a lower pectin solution volume (2.67 × 10^?3 mL) than casting (5.97 × 10^?3 mL) to produce films of the same area and thickness; the physical, structural, and thermal characteristics of these films were evaluated. Electrosprayed films were slightly more transparent, and with smoother surface than those obtained by casting, but with more and smaller internal pores, resulting in different film densities (0.7 g/cm³ electrospraying, 1.7 g/cm³ casting), that could be linked to the larger water vapor permeability value obtained. These changes could be related to a physical phenomenon, seeing as the percentage of crystallinity and melting temperature remained invariable for both films. These results show that the electrospraying technique has potential in areas such as wound dressings, tissue engineering, and the release of drugs. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43779.     

The effect of thermal exposure on the electrical conductivity and static mechanical behavior of several age hardenable aluminum alloys

Aluminum alloys 2014-T6, 2024-T3, 6061-T6, 7050-T7451, and 7075-T6 were thermally exposed at different times (1 min to 20 days) and temperatures 177–482 °C (350–900 F). This study was conducted to simulate the effects of heat damage on aluminum alloys and to determine the correlations existing between the static mechanical and electrical conductivity properties. Results indicate that at the temperatures below 260 °C (500 F) all five alloys showed clear correlations between the mechanical and physical properties.     

Study of cellular architecture and micromechanical properties of cuajilote fruits (Parmentiera edulis D.C.) using different microscopy techniques

The cuajilote (Parmentiera edulis D.C.) tree produces fibrous fruits with a high content of lignocellulosic compounds. However, this fruit and their fibers have been scarcely studied. For this reason, an integral study of their cellular architecture, physicochemical, micromechanical, and structural properties in two maturity stages were carried out. Physicochemical tests, light, confocal and electron microscopy, microindentation, and X‐ray diffraction were used for the characterization of fruit and their fibers. Chemical analysis showed that the unripe fruits have the highest cellulose content (42.17%), but in ripe fruit the cellulose content decreases (32.76%) while lignin content increases from 35.26 to 40.79%, caused by the lignification of the sclerenchyma fibers. Microstructural and micromechanical studies in the different regions of the fruit provided relevant information about its cellular architecture, distribution of lignocellulosic compounds and its role in the micromechanical properties of their fibers. The thickening cell wall of sclerenchyma fibers was caused by the cellular lignification of the ripe fruits. According to the physicochemical and structural studies, cuajilote fibers are comparable to other fibers obtained from crops rich in lignocellulosic compounds. The current study provided new knowledge about the cellular architecture of fruit and criteria for selecting the ripening stage adequate for the extraction of cellulose or lignin. Furthermore, information regarding the micromechanical properties of their fibers and which structural arrangement could be more convenient for mechanical reinforcement of biodegradable materials was obtained.     

Characterization of pulp calcifications and changes in their composition after treatments with citric acid and ethylenediaminetetraacetic acid solutions

The ectopic calcifications of non-mineralized tissues can occur in several forms throughout life, such as pulpal calcification. The presence of pulp stones is a challenge in endodontic treatment because they partially or fully obliterate the pulp chamber hindering access to root canals and their subsequent shaping. This study aimed to determine their crystallographic properties and evaluate the capacity of citric acid (CA) and ethylenediaminetetraacetic acid (EDTA) to promote the demineralization of pulp calcifications. The samples were obtained from patients with indications of endodontic treatment, and the radiographic examination was suggestive of pulp stone in at least one permanent tooth. The samples were isolated and analyzed by scanning electron microscopy/energy-dispersive x-ray spectroscopy (SEM/EDX). The Fourier Transform by high resolution-transmission electron microscopy, Raman microscopy, and X-ray diffraction (XRD) were used to identify the mineral phase and crystallographic characteristics. To evaluate the effect of CA and EDTA on the crystallinity of calcifications, they were submerged into these two individual solutions and the changes were assessed in situ by Raman spectroscopy. The SEM images obtained from calcifications demonstrated irregular morphologies. EDX of sample surfaces shows a high presence of oxygen, carbon, calcium, and phosphorous, however, other elements such as sodium, magnesium, nitrogen, chlorine, potassium, sulfur, and zinc were identified in less quantity. According to Raman, XRD, and high-resolution transmission electron microscopy, the predominant mineral phase identified in the pulpal calcification was a poor crystallinity apatite. According to in situ analyses, the effect of CA and EDTA was observed on the signals of PO₄³⁻ and CH₂ groups corresponding to inorganic and organic components. The changes with CA were evident at 7 min while the effect of EDTA was observed until 15 min of treatment. All results indicate that pulp stones have a heterogeneous composition principally composed of apatite with low crystallinity. The solubility of these pathological minerals is adequate using solutions such as EDTA or CA; however, the effectivity depends on the mineralization grade of calcifications, time, and concentration of exposition to this chemical.