Enhancement of thermal,mechanical, ignition and damping response of magnesium using nano-ceria particles

Magnesium (Mg)-based nanocomposites owing to their low density and biocompatibility are being targeted for transportation and biomedical sectors. In order to support a sustainable environment, the prime aim of this study was to develop non-toxic magnesium-based nanocomposites for a wide spectrum of applications. To support this objective, cerium oxide nanoparticles (0.5?vol%, 1?vol%, and 1.5?vol%) reinforced Mg composites are developed in this study using blend-press-sinter powder metallurgy technique. The microstructural studies exhibited limited amounts of porosity in Mg and Mg-CeO₂ samples (< 1%). Increasing presence of CeO₂ nanoparticles (up to 1.5?vol%) led to a progressive increase in microhardness, dimensional stability, damping capacity and ignition resistance of magnesium. The compressive strengths increased with the increasing addition of the nanoparticles with a significant enhancement in the fracture strain (up to ~48%). Superior energy absorption was observed for all the composite samples prior to compressive fracture. Further, enhancement in thermal, mechanical and damping characteristics of pure Mg is correlated with microstructural changes due to the presence of the CeO₂ nanoparticles.     

Fatty acids from Macoma sp. of bivalve mollusc

Fatty acids of the total lipids of flesh and hepatopancreas of Macoma sp. have been determined. The level of 20:5w3 (ca 17%), a biologically important fatty acid, was found to be considerably high. Other major component fatty acids were 16:0, 16:1, 18:1 and 22:4w6. High levels of 22:5w6 (8%), 22:5w3 (8%) and 22:6w3 (ca 15%) were found in flesh lipid. Nonsaponifiables were also high (28–30%). Alkyl ether acyl glycerols were found in flesh (1.3%) and hepatopancreas (3.8%).     

An integrated modeling approach to predict flooding on urban basin.

Correct prediction of flood extents in urban catchments has become a challenging issue. The traditional urban drainage models that consider only the sewerage-network are able to simulate the drainage system correctly until there is no overflow from the network inlet or manhole. When such overflows exist due to insufficient drainage capacity of downstream pipes or channels, it becomes difficult to reproduce the actual flood extents using these traditional one-phase simulation techniques. On the other hand, the traditional 2D models that simulate the surface flooding resulting from rainfall and/or levee break do not consider the sewerage network. As a result, the correct flooding situation is rarely addressed from those available traditional 1D and 2D models. This paper presents an integrated model that simultaneously simulates the sewerage network, river network and 2D mesh network to get correct flood extents. The model has been successfully applied into the Tenpaku basin (Nagoya, Japan), which experienced severe flooding with a maximum flood depth more than 1.5 m on September 11, 2000 when heavy rainfall, 580 mm in 28 hrs (return period > 100 yr), occurred over the catchments. Close agreements between the simulated flood depths and observed data ensure that the present integrated modeling approach is able to reproduce the urban flooding situation accurately, which rarely can be obtained through the traditional 1D and 2D modeling approaches.     

Thermally induced crosslinking between polyacrylic acid and epoxidized natural rubber. III. Effect of carbon black filler and mixer rotor speed

High-temperature molding of Brabender-mixed blend of polyacrylic acid (PAA) and epoxidized natural rubber (ENR) causes thermally induced crosslinking between PAA and ENR. Studies on Monsanto rheometry of the blend and physical properties, solvent swelling, and dynamic mechanical properties of the molded blend show that both mixer rotor speed and carbon black filler influence the crosslinking between the component polymers. For example, the extent of crosslinking for the 50–50 PAA–ENR blend was found maximum when the component polymers were mixed at 40 rpm, but the same blend filled with 30 phr HAF carbon black filler showed maximum crosslinking when mixing was carried out at 120 rpm. The results have been explained on the basis of formation of network on the filler surface, which in turn depends on two competing factors: increase in bound rubber formation with increase in filler loading at a fixed rotor speed and enhanced degradation of ENR at higher mixer rotor speed at a fixed filler loading. © 1994 John Wiley & Sons, Inc.     

The Effect of Temperature on the Strength of Adhesively-Bonded Composite-Aluminium Joints

Different materials have different coefficients of thermal expansion, which is a measure of the change in length for a given change in temperature. When different materials are combined structurally, as in a bonded joint, a temperature change leads to stresses being set up. These stresses are present even in an unloaded joint which has been cured at say 150°C and cooled to room temperature. Further stresses result from operations at even lower temperatures.

In addition to temperature-induced stresses, account also has to be taken of changes in adhesive properties. Low temperatures cause the adhesive to become more brittle (reduced strain to failure), while high temperatures cause the adhesive to become more ductile, but make it less strong and more liable to creep.

Theoretical predictions are made of the strength of a series of aluminium/CFRP joints using three different adhesives at 20°C and 55°C. Various failure criteria are used to show good correlation with experimental results.     

Color Subspaces as Photometric Invariants

Complex reflectance phenomena such as specular reflections confound many vision problems since they produce image ‘features’ that do not correspond directly to intrinsic surface properties such as shape and spectral reflectance. A common approach to mitigate these effects is to explore functions of an image that are invariant to these photometric events. In this paper we describe a class of such invariants that result from exploiting color information in images of dichromatic surfaces. These invariants are derived from illuminant-dependent ‘subspaces’ of RGB color space, and they enable the application of Lambertian-based vision techniques to a broad class of specular, non-Lambertian scenes. Using implementations of recent algorithms taken from the literature, we demonstrate the practical utility of these invariants for a wide variety of applications, including stereo, shape from shading, photometric stereo, material-based segmentation, and motion estimation.     

An overview on microwave processing of material: A special emphasis on glass melting

Material processing adopting microwave heating has emerged as an alternative tool owing to faster processing, a cleaner environment, and several other advantages. This review provides a summary of recent reports of microwave synthesis of materials. This study reviews the use of microwave energy for application in several material processing technologies apart from food processing. A special emphasis has been made in the processing of glass adopting microwave energy. Melting of glass comprising SiO₂, P₂O₅, B₂O₃ as the main building block has been discussed. It has been revealed that silica, a microwave transparent material as reported earlier, can be heated under microwave heating directly. Microwave absorption of raw materials and different glass system has been discussed. Dielectric properties, particularly loss tangent or loss factor, are presented for some glass composition. Less evaporation of ingredient and low contamination from the crucible wall are noticed during glass melting using microwave heating. Enhanced iron redox ratio (Fe⁺²/∑Fe) in microwave processing may be considered an advantage in the preparation of heat absorbing filter glass. Small-scale glass melting using the microwave heating has a significant impact on energy and time saving. However, the challenges associated with the upscaling glass melting with microwave heating and future scope have been talked about.     

Inorganic-Based Printed Thermoelectric Materials and Devices

One of the simplest ways to generate electric power from waste heat is thermoelectric (TE) energy conversion. So far, most of the research on thermoelectrics has focused on inorganic bulk TE materials and their device applications. However, high production costs per power output and limited shape conformity hinder applications of state-of-the-art thermoelectric devices (TEDs). In recent years, printed thermoelectrics has emerged as an exciting pathway for their potential in the production of low-cost shape-conformable TEDs. Although several inorganic bulk TE materials with high performance are successfully developed, achieving high performance in inorganic-based printed TE materials is still a challenge. Nevertheless, significant progress has been made in printed thermoelectrics in recent years. In this review article, it is started with an introduction signifying the importance of printed thermoelectrics followed by a discussion of theoretical concepts of thermoelectricity, from fundamental transport phenomena to device efficiency. Afterward, the general process of inorganic TE ink formulation is summarized, and the current development of the inorganic and hybrid inks with the mention of their TE properties and their influencing factors is elaborated. In the end, TEDs with different architecture and geometries are highlighted by documenting their performance and fabrication techniques.     

OTIS-MOT: an efficient interconnection network for parallel processing

Mesh of trees (MOT) is well known for its small diameter, high bisection width, simple decomposability and area universality. On the other hand, OTIS (Optical Transpose Interconnection System) provides an efficient optoelectronic model for massively parallel processing system. In this paper, we present OTIS-MOT as a competent candidate for a two-tier architecture that can take the advantages of both the OTIS and the MOT. We show that an n⁴_-n^{4}_{-} processor OTIS-MOT has diameter 8log n ^∗+1 (The base of the logarithm is assumed to be 2 throughout this paper.) and fault diameter 8log n+2 under single node failure. We establish other topological properties such as bisection width, multiple paths and the modularity. We show that many communication as well as application algorithms can run on this network in comparable time or even faster than other similar tree-based two-tier architectures. The communication algorithms including row/column-group broadcast and one-to-all broadcast are shown to require O(log n) time, multicast in O(n ²log n) time and the bit-reverse permutation in O(n) time. Many parallel algorithms for various problems such as finding polynomial zeros, sales forecasting, matrix-vector multiplication and the DFT computation are proposed to map in O(log n) time. Sorting and prefix computation are also shown to run in O(log n) time.     

Hydrodynamic dispersion of reactive solute in a Hagen-Poiseuille flow of a layered liquid

An analysis of the solute dispersion in the liquid flowing through a pipe by means of Aris-Barton's ⒈method of moments',under the joint effect of some finite yield stress and irreversible absorption into the wall is presented in this paper.The liquid is considered as a three-layer liquid where the center region is Casson liquid surrounded by Newtonian liquid layer.A significant change from previous modelling exercises in the study of hydrodynamic dispersion,different molecular diffusivity has been considered for the different region yet to be constant.For all time period,finite difference implicit scheme has been adopted to solve the integral moment equation arising from the unsteady convective diffusion equation.The purpose of the study is to find the dependency of solute transport coefficients on absorption parameter,yield stress,viscosity ratio,peripheral layer variation and in addition with various diffusivity coefficients in different liquid layers.This kind of study may be useful for understanding the dispersion process in the blood flow analysis.