Understanding the Future of Video Coding

Book Reviewed: Iain E.G. Richardson, H.264 and MPEG-4 VideoCompression: Video Coding for Next-GenerationMultimedia, John Wiley & Sons, 2003, $102.00, 206 pp., ISBN 0-470-84837-5.     

A STUDY ON THE PERFORMANCE OF THE CATALYTIC POROUS-WALL THREE-PHASE REACTOR

A theoretical investigation of a catalytic porous-wall reactor in which gaseous and liquid reactants approach each other from opposite sides of the catalyst is undertaken. Equations for the annular liquid-channel are coupled with those for the catalytic wall and solved numerically and analytically using a simplified model. For the model reaction under study, the main design and operation parameters which affect reactor performance are the Thiele modulus, Peclet number, width of the liquid channel and the inlet concentration of the reactant in the liquid phase.

The effect of reactor configuration is peculiar to the cylindrical geometry because the thickness and relative location of the catalytic wall as well as the selection of the liquid and gas channels can influence the reactor performance. Thin-walled catalyst tubes have larger effectiveness factors and as the tube radius approaches that of the reactor, conversion in the reactor increases especially when the liquid is saturated with the gaseous reactant. Concentration of the liquid reactant in the feed has a significant effect if the reactant is depleted at some point inside the catalyst wall. Since the reaction zone width can be adjusted by changing the feed composition, this might have important implications with respect to selectivity.     

Zinc Oxide Nanowire Decorated Single‐Use Electrodes for Electrochemical DNA Detection

The surfaces of pencil graphite electrodes (PGEs) were decorated with zinc oxide nanowires (ZnO NWs) for the electrochemical detection of nucleic acids. ZnO NWs were synthesized through simple hydrothermal method. PGEs decorated with ZnO NWs (ZnO NW/PGEs) were electrochemically characterized through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) following morphological characterization through transmission (TEM) and scanning electron microscopy (SEM). Enhanced sensor response obtained using ZnO NW/PGEs contrary to the bare PGE (control) samples. Our preliminary results simply reveal the potential of combining ZnO NWs with disposable sensor technology for the electrochemical detection of DNA.     

Capacitor Applications of Nanocomposite Films for Poly(3,4-ethylenedioxythiophene-co-pyrrole)/Multi-Walled Carbon Nanotubes and Poly(3,4-ethylenedioxythiophene-co-pyrrole)/Copper Oxide

Polypyrrole/multi-walled carbon nanotube, poly(3,4-ethylenedioxythiophene)/multi-walled carbon nanotube and their nanocomposites P(EDOT-co-Py)/multi-walled carbon nanotube and P(EDOT-co-Py)/copper (II) oxide, (CuO) in the initial feed ratio of [EDOT]₀/[Py]₀ = 1/5 were electrosynthesized on glassy carbon electrode by cyclic voltammetric method. Their characterizations were performed by cyclic voltammetric, Fourier transform infrared-attenuated total reflectance, scanning electron microscopy, energy dispersion X-ray analysis, and electrochemical impedance spectroscopy. To the best of authors’ knowledge, the first report on polypyrrole/multi-walled carbon nanotube, PEDOT/multi-walled carbon nanotube, P(EDOT-co-Py)/multi-walled carbon nanotube and P(EDOT-co-Py)/CuO nanocomposite films were comparatively examined in 0.1 M NaClO₄/CH₃CN and in 0.1 M sodium dodecyl sulfate solutions. The highest specific capacitance for PEDOT/multi-walled carbon nanotube and polypyrrole/multi-walled carbon nanotube composite films were obtained as C_sp = 306 mF × cm^?2 for 3% multi-walled carbon nanotube and C_sp = 804 mF × cm^?2 for 1% multi-walled carbon nanotube, respectively. The highest specific capacitances were obtained as C_sp = 27.40 mF × cm^?2 and C_sp = 26.90 mF × cm^?2 for P(EDOT-co-Py)/multi-walled carbon nanotube includes the wt percent of 1% multi-walled carbon nanotube and P(EDOT-co-Py)/CuO includes the wt percent of 3% CuO, respectively. The C_sp of P(EDOT-co-Py)/CNT composite films were calculated as 9.43 and 11.49 mF × cm^?2 for 3 and 5% multi-walled carbon nanotube, respectively. In addition, The EIS results were simulated with the equivalent circuit model of R_s(C_dl1(R₁(QR₂)))(C_dl2R₃).     

Synthesis and characterization of PMMA composites activated with starch for immobilization of L‐asparaginase

Poly (methyl methacrylate) (PMMA)–starch composites were prepared by emulsion polymerization technique for L‐asparaginase (L‐ASNase) immobilization as highly activated support. The hydroxide groups on the prepared composites offer a very simple, mild and firm combination for enzyme immobilization. The pure PMMA and PMMA‐starch composites were characterized as structural, thermal and morphological. PMMA‐starch composites were found to have better thermal stability and more hydrophilic character than pure PMMA. L‐ASNase was immobilized onto PMMA‐starch composites contained the different ratio of starch (1, 3, 5, and 10 wt %). Immobilized L‐ASNase showed better performance as compared to the native enzyme in terms of thermal stability and pH. K_m value of immobilized enzyme decreased approximately eightfold compared with the native enzyme. In addition to, immobilized L‐ASNase was found to retain 60% of activity after 1‐month storage period at 4 °C. Therefore, PMMA‐starch composites can be provided more advantageous in terms of enzymatic affinity, thermal, pH and storage stability as L‐ASNase immobilization matrix. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43421.     

Evaluation of antimicrobial effects of lauric arginate on reduction of Salmonella spp. in ground chicken

The efficacy of lauric arginate (LAE) on Salmonella survivability in ground chicken containing 9.8% fat was determined under refrigerated storage. The effect of LAE treatments on total aerobes, pH and objective colour were also assessed in ground chicken. LAE was highly effective against Salmonella in 0.1% peptone with no detectable survivors following treatment with 200 ppm and 400 ppm of LAE. No difference existed (P > 0.05) in the growth of Salmonella and total aerobes after treatment with 200 and 400 ppm of LAE in ground chicken inoculated with a four strain mixture of Salmonella. At these concentrations, LAE did not exhibit any treatment effect on the pH and colour of ground chicken (P > 0.05). In conclusion, although LAE possesses strong inhibitory (P < 0.05) effect against Salmonella in suspension in 0.1% peptone water, no inhibitory (P > 0.05) effect on growth of Salmonella was observed in ground chicken at the currently approved levels of 200 ppm of LAE.     

A Novel Control Unit for a Friction Welding Machine Based on Computer

Typical friction welds are made by holding a non-rotating sample in contact with a rotating sample under constant or gradually increasing pressure until the interface reaches the welding temperature and then stopping pressure rotating to complete the weld. This process requires additional time and is labor intensive. Recently, several control systems have been introduced to the industry for improving the welding process such as conventional automatic control, microcontroller control, and Programmable Logic Controller (PLC). However, these processes have limitations either on materials selection or on visualization. In this study, continuous monitoring, control and recording are implemented. Computer-controlled platform for the simulation and control of mechanisms is based on a Microsoft Visual Basic environment. Welding parameters such as friction time, forge time and breaking time are entered with a keyboard and can be saved and used again. To show the feasibility and versatility of the study, the evaluation is used for sample joining. It has been observed that this system works successfully and gives good performance.     

Hierarchical quantization indexing for wavelet and wavelet packet image coding

In this paper, we introduce the quantization index hierarchy, which is used for efficient coding of quantized wavelet and wavelet packet coefficients. A hierarchical classification map is defined in each wavelet subband, which describes the quantized data through a series of index classes. Going from bottom to the top of the tree, neighboring coefficients are combined to form classes that represent some statistics of the quantization indices of these coefficients. Higher levels of the tree are constructed iteratively by repeating this class assignment to partition the coefficients into larger subsets. The class assignments are optimized using a rate-distortion cost analysis. The optimized tree is coded hierarchically from top to bottom by coding the class membership information at each level of the tree. Context-adaptive arithmetic coding is used to improve coding efficiency. The developed algorithm produces PSNR results that are better than the state-of-art wavelet-based and wavelet packet-based coders in literature.     

Formation of chlorination by-products in waters with low SUVA--correlations with SUVA and differential UV spectroscopy

The formation of THMs and HAAs after chlorination of bulk water fractions of low-SUVA (specific UV absorbance) surface waters was investigated, and the applicability of SUVA and differential UV spectroscopy for monitoring THMs and HAAs in such waters was evaluated. Samples from two reservoirs were fractionated employing XAD-8, XAD-4, MIEX resin and granular activated carbon adsorption. A total of 83 bulk water NOM fractions (i.e., the remaining solutions after contact with the adsorbent or resin at various doses) were obtained and chlorinated. The majority of NOM in both waters was found to have average molecular weights <2000 Da and SUVA values <2L/mg Cm, indicating that NOM in the tested waters contained dominantly lower molecular weight fractions and low aromaticity. SUVA did not correlate well with the formation and speciation of THMs and HAAs, suggesting that SUVA does not capture the reactive sites on NOM moieties responsible for DBP formation in low-SUVA waters. Similarly, no correlations were found among THMs/HAAs formations and differential UV spectroscopy, indicating the formation of DBPs independent of destruction in UV-absorbing sites. In all fractions, concentrations of THMs were higher than those of HAAs. Chlorinated DBP species were dominant over brominated ones due to low bromide concentrations. The results overall suggested that low- or non-UV-absorbing NOM moieties play important roles in the formation of DBPs in waters with low SUVA, low DOC and low bromide levels.