Hydrogen production in solid electrolyte membrane reactors (SEMRs)

In the present work, the prospects and trends of solid electrolyte membrane reactors (SEMRs) towards hydrogen production, are discussed. Initially, an overview of the principles, the properties and the techniques related to the usage of the SEMRs, are presented. In the following, a literature survey covering earlier and recent developments of the various methods (e.g. reforming or partial oxidation or dehydrogenation of hydrocarbons, steam electrolysis) employed in the SEMRs for the production of hydrogen, is performed. Finally, the current status of this research field is analyzed and future research topics are proposed.     

Evaluation of resistance development by Tribolium confusum Du Val (Coleoptera: Tenebrionidae) to diatomaceous earth under laboratory selection

Laboratory selection experiments were undertaken in order for the resistance development of Tribolium confusum adults to diatomaceous earth (DE) to be assessed. Adults from an initial laboratory reared population (P) were selected by exposure on hard wheat treated with 800 ppm of DE for 4 days at 25 °C and 65% r.h. The surviving adults and their progeny were maintained on flour and 5% brewer's yeast until the emergence of the next generation of adults. The emerged (F₁) adults were again exposed on treated hard wheat, as described above, and the whole procedure was repeated for 10 consecutive generations. Mortality of the emerged adults was assessed through bioassays that were undertaken in each generation at 25 °C and 65% r.h. In each bioassay, five dose levels of DE (250, 500, 800, 1000 and 1500 ppm) and four exposure intervals (24, 48 h, 7 and 14 days) were tested. Mortality of confused flour beetles generally declined at each dose rate and exposure interval with each generation, and significant differences were observed between the initial population (P) and after five or more (F₅+) generations of selection.     

Insecticidal effect of three diatomaceous earth formulations, applied alone or in combination, against three stored-product beetle species on wheat and maize

Laboratory tests were carried out to examine the insecticidal effect of three commercially available diatomaceous earth (DE) formulations on wheat and maize against three major stored-grain beetle species: Rhyzopertha dominica, Sitophilus oryzae, and Tribolium confusum. The three DEs tested were Insecto^®, PyriSec^®, and Protect-It^®. These DEs were applied alone or in all possible combinations (Insecto^®+PyriSec^®, Insecto^®+Protect-It^®, PyriSec^®+Protect-It^®, and all three DEs together), at three (total) dose rates: 0.25, 0.5, and 0.75 g/kg of each commodity. Adults of the above species were exposed to the treated commodities for 7 d at 26 °C, and 65% r.h., and after this interval the mortality was measured. For each species, adult mortality was significantly affected by the type of DE, the commodity, and the dose rate. All DEs were less effective against T. confusum, where mortality did not exceed 67%, in comparison with the other two species, where 100% mortality was achieved in some combinations. For all species tested, all DEs were more effective on wheat than on maize. Generally, the mix of two or three DEs was more effective than the application of one DE, for all species and commodities. The results of the present work clearly indicate that a blending of several DEs together may produce a new DE formulation that is highly effective at low dose rates.     

Three-dimensional optical data storage through multi-photon confocal microscopy and imaging

Three dimensional optical data storage is one of the most promising tools to respond to the always growing demand for high data storage capacity. Here, we focused a femtosecond laser source by means of a confocal microscope onto different transparent recording media. The purpose of the study is to probe the capability of the system to independently address different data layers within the storage medium achieving thus three dimensional data storage. We demonstrated the possibility to write superposed independent layers of data due to either multiphoton excitation or to local optical breakdown and the performances observed in the different types of media used are compared.     

Hydrogels prepared by electron irradiation of poly(ethylene oxide) in water solution: unexpected dependence of cross-link density and protein diffusion coefficients on initial PEO molecular weight

Under ionizing radiation aqueous solutions of water-soluble polymers become cross-linked and form hydrogels, primarily by radiolysis of water-generating hydroxyl radicals which attack the polymer chains. The chain radicals thus formed create cross-links by coupling. In particular, hydrogels formed from poly(ethylene oxide) are of interest for biomedical applications, including those in which it is necessary to transport large molecules such as growth factors, in addition to nutrients, to cells attached to the surface. We sought a rapid and simple method for estimating diffusion coefficients by observing the diffusion of two red-coloured proteins: cytochrome C and hemoglobin of respective molecular weights 12,000 and 67,000. In the course of this we discovered a previously unreported effect of the primary molecular weight of the polymer, before cross-linking, on the cross-link density finally achieved and on the diffusion coefficient of the proteins.     

Insecticidal effect of Steinernema feltiae (Filipjev) (Nematoda: Steinernematidae) against Tribolium confusum du Val (Coleoptera: Tenebrionidae) and Ephestia kuehniella (Zeller) (Lepidoptera: Pyralidae) in stored wheat

The confused flour beetle, Tribolium confusum, and the Mediterranean flour moth, Ephestia kuehniella, are important pests of stored grain products. The insecticidal effect of three strains (UK 76 [=Nemasys], USA/SC, and Hawaii) of the entomopathogenic nematode Steinernema feltiae was determined in the laboratory, in wheat, against these pests. The nematodes were applied at three dose rates: 100, 300 and 900 nematodes/insect individual. The Hawaii strain was most virulent against T. confusum adults and larvae, with a significant dose effect in the case of the larvae. Larval mortality of this species reached 79% and 100% after 7 and 14 d of exposure to the nematodes, respectively, at the highest dose applied. On the other hand, adult mortality of T. confusum did not exceed 66%. In the case of E. kuehniella larvae, USA/SC performed best causing 52% and 69% mortality after 7 and 14 d exposure, respectively, at the highest dose tested. Since very few data are available on the effect of entomopathogenic nematodes against these pests, it is concluded that the Hawaii and USA/SC strains of S. feltiae should be further investigated as promising biological control agents for T. confusum and E. kuehniella.     

Green Biocomposites for Thermoelectric Wearable Applications

The materials commonly used to fabricate thermoelectric devices are tellurium, lead, and germanium. These materials ensure the best thermoelectric performance, but exhibit drawbacks in terms of availability, sustainability, cost, and manufacturing complexity. Moreover, they do not guarantee a safe and cheap implementation in wearable thermoelectric applications. Here, p‐Type and n‐type flexible thermoelectric textiles are produced with sustainable and low‐cost materials through green and scalable processes. Cotton is functionalized with inks made with biopolyester and carbon nanomaterials. Depending on the nanofiller, i.e., graphene nanoplatelets, carbon nanotubes, or carbon nanofibers, positive or negative Seebeck coefficient values are obtained, resulting in a remarkable electrical conductivity value of 55 S cm^?1 using carbon nanotubes. The best bending and washing stability are registered for the carbon nanofiber‐based biocomposites, which increase their electrical resistance by 5 times after repeated bending cycles and only by 30% after washing. Finally, in‐plane flexible thermoelectric generators coupling the best p‐ and n‐type materials are fabricated and analysed, resulting in an output voltage of ≈1.65 mV and a maximum output power of ≈1.0 nW by connecting only 2 p/n thermocouples at a temperature difference of 70 °C.     

Characterization of fatigue resistance in photochromic composite materials for 3D rewritable optical memory applications

Fatigue resistance of the photochromic diarylethene molecules 1,2-bis[2-methylbenzo[b]thyophen-3-yl]-3,3,4,4,5,5-hexafluoro-1-cyclopentene embedded in three different acrylic polymers is studied upon multiple coloration–decoloration cycles. The resistance to photofatigue is found to be different in the three polymeric materials when one-photon excitation was used for the reversible photoconversion experiment. In particular, the photochromic molecules lose their photoisomerization ability faster if they are embedded in poly(methyl methacrylate) (PMMA) with respect to poly(ethyl methacrylate-co-methyl acrylate) (PEMMA) and poly(ethyl methacrylate) (PEMA). We propose several explanations based on the physico-chemical properties of the matrix and of the photochromic molecules. In the case of two-photon excitation, which is necessary for 3D optical writing, the fatigue resistance is found to be poorer than in the one-photon case. The accelerated photodegradation can be assigned to the non-linear nature of interaction between the polymeric composite material and light.     

Production of Green Star/Linear PLA Blends by Extrusion and Injection Molding: Tailoring Rheological and Mechanical Performances of Conventional PLA

In this work, bio-based products composed of blends of a star-shaped poly(d ,l -lactide) (star-PDLLA) and a conventional linear poly(l -lactide) (linear-PLLA) are produced by typical large-scale manufacturing techniques for thermoplastic blends. In the first case, the two polymers are blended through melt extrusion, producing pellets that are subsequently compression-molded into the final bio-based polymer films. Alternatively, the star/linear poly(lactide) (PLA) materials are developed by direct blending through injection molding, a process that generally applies after a preblending extrusion step to ensure proper mixing. Thermomechanical degradation induced by the different processes is evaluated, and the performances of the final star/linear PLA products are thoroughly compared. The effect of the short-branched, amorphous, star polymeric component on thermal, mechanical, and rheological properties of the conventional PLLA is comprehensively investigated, revealing that the star-PDLLA incorporation promotes the formation of a more flexible and tougher material with reduced capability of crystallization. Most importantly, star-PDLLA decreases the melt viscosity of the final material, while increasing the shear-thinning behavior, hence facilitating melt flow during manufacturing. Such properties lead to enhanced material ductility and processability, with respect to typically brittle and viscous conventional PLLA-based materials. Moreover, the tuning of final material performances can be achieved by simply varying the star-PDLLA content.