Prefetching in Content Distribution Networks via Web Communities Identification and Outsourcing

Content distribution networks (CDNs) improve scalability and reliability, by replicating content to the “edge” of the Internet. Apart from the pure networking issues of the CDNs relevant to the establishment of the infrastructure, some very crucial data management issues must be resolved to exploit the full potential of CDNs to reduce the “last mile” latencies. A very important issue is the selection of the content to be prefetched to the CDN servers. All the approaches developed so far, assume the existence of adequate content popularity statistics to drive the prefetch decisions. Such information though, is not always available, or it is extremely volatile, turning such methods problematic. To address this issue, we develop self-adaptive techniques to select the outsourced content in a CDN infrastructure, which requires no apriori knowledge of request statistics. We identify clusters of “correlated” Web pages in a site, called Web site communities, and make these communities the basic outsourcing unit. Through a detailed simulation environment, using both real and synthetic data, we show that the proposed techniques are very robust and effective in reducing the user-perceived latency, performing very close to an unfeasible, off-line policy, which has full knowledge of the content popularity.     

Extending the Fatigue Life of Riveted Coped Stringer Connections

Fatigue cracking occurs at the copes of stringer–floorbeam connections of older, riveted steel bridges. Some cracks are quite long and raise serious questions regarding the remaining fatigue life of the subject bridges. Damage limitation methods (DLMs) have been used to increase the fatigue life of these stringers, but the effectiveness of the DLMs for these riveted connections had never been evaluated by tests. Therefore, tests were conducted to evaluate the fatigue life of coped, riveted stringer–floorbeam connections, and the effectiveness of DLMs. Fatigue cracks in the coped stringer–floorbeam connection were initially developed to establish crack initiation requirements and the rate and extent of crack growth. Once a significant crack was noted, one of several DLMs was applied, and the specimens were retested to determine the effectiveness of the DLM in controlling cracking. These DLMs included the drilled hole, the inserted bolt and the removed rivet methods. The relative effectiveness of the methods is described, and a design procedure is proposed for improving their performance.     

Community detection in Social Media

The proposed survey discusses the topic of community detection in the context of Social Media. Community detection constitutes a significant tool for the analysis of complex networks by enabling the study of mesoscopic structures that are often associated with organizational and functional characteristics of the underlying networks. Community detection has proven to be valuable in a series of domains, e.g. biology, social sciences, bibliometrics. However, despite the unprecedented scale, complexity and the dynamic nature of the networks derived from Social Media data, there has only been limited discussion of community detection in this context. More specifically, there is hardly any discussion on the performance characteristics of community detection methods as well as the exploitation of their results in the context of real-world web mining and information retrieval scenarios. To this end, this survey first frames the concept of community and the problem of community detection in the context of Social Media, and provides a compact classification of existing algorithms based on their methodological principles. The survey places special emphasis on the performance of existing methods in terms of computational complexity and memory requirements. It presents both a theoretical and an experimental comparative discussion of several popular methods. In addition, it discusses the possibility for incremental application of the methods and proposes five strategies for scaling community detection to real-world networks of huge scales. Finally, the survey deals with the interpretation and exploitation of community detection results in the context of intelligent web applications and services.     

Stabilization of Nanoalumina Colloidal Slips

The processing of nanosized powders to produce dense components is a difficult task, mainly due to the strong agglomeration of nanoparticles. In this work, deagglomeration studies were carried out on sol–gel‐derived γ‐alumina suspensions through the addition of dispersant or dispersant in combination with ethylene glycol as binder and the proper wet ball‐milling. For this purpose, zeta‐potential, viscosity, and sedimentation studies were carried out, whereas dilatometric studies accompanied by XRD analyses were performed on the powders derived from the most stable suspensions. Sintering studies followed and the as received ceramics were evaluated by SEM. The optimum stabilization was achieved through the synergistic addition of 2.75 mg/g ammonium polymethacrylate with 1 wt% ethylene glycol. The respective powder, although it indicates a shift of the sintering start to higher temperature, leads to the densest ceramic with the finest (500 nm mean grain size) and the most homogeneous microstructure.     

Public–private partnership projects in Greece: risk ranking and preferred risk allocation

Project participants, through experience, have an initial perception and predisposition towards risk and the types of risks they are willing and able to undertake. This is equally true for parties interested in public–private partnership (PPP) projects. These initial positions have been registered for the major Greek PPP market stakeholders potentially involved in a PPP arrangement through a survey covering all candidate construction companies, interested financing institutes and a number of public sector entities to be involved in PPPs. Findings revealed that stakeholders were, for the majority of risks identified, in agreement as to preferred risk allocation. Risk allocation preferences for construction companies were compared with similar findings for the UK, a mature PPP market, indicating a possible learning/maturing process based on the particular country background. Conclusions add to other surveys carried out on the subject and should enable public sector clients to establish a more efficient framework for risk allocation, thus reducing negotiations prior to contract award and minimizing the risk of poor risk distribution.     

Method for three-dimensional data registration from disparate imaging modalities in the NOGA Myocardial Viability Trial

Region-by-region comparison of data concerning left ventricular (LV) status is difficult to perform quantitatively if the data was acquired from disparate imaging modalities. We validated a method for comparing measurements obtained by electromechanical mapping (EMM) catheter with dobutamine stress echocardiography (DSE) via biplane contrast ventriculography, with the assistance of three-dimensional (3-D) echocardiographic data. The ventriculograms were traced and the borders were used to reconstruct the LV in 3-D with the aid of a database of 3-D echocardiographic studies. The 3-D LV was oriented to the EMM data based on the body coordinates and then manually scaled and translated to fit. The EMM data were mapped to the 3-D surface. The 3-D surface was divided into the 16 regions defined for echocardiographic assessment. The mean EMM value for local linear shortening, a parameter of function, was computed in each segment. The EMM and semiquantitative echocardiographic assessments of regional myocardial function were compared by segment, and the volume of the 3-D LV was compared with the volume computed from the ventriculogram. The volume of the 3-D surface correlated closely with that of the ventriculogram (r = 0.97, SEE = 27.4 ml) but with a significant overestimation of 63 +/- 35 ml. There was a highly significant (p < 0.0001) agreement in regional function between EMM and echo. Local linear shortening correlated significantly (p < 0.0001) with echocardiographic severity of wall motion, averaging 9.5 +/- 6.5, 8.1 +/- 5.4, 5.9 +/- 4.8, and 6.2 +/- 3.3 in segments read as normal, hypokinetic, akinetic, and dyskinetic, respectively. The method presented is valid for comparing cardiac parameters derived from disparate image data on a region-by-region basis by employing anatomic landmarks on 3-D reconstructions of the LV endocardial surface.     

Microstructure effect on the properties of a commercial low-fusing dental porcelain

The aim of this study was to investigate the effect of firing cycle on a dental porcelain microstructure in order to correlate microstructure changes with mechanical and thermal properties. A commercial low-fusing dental porcelain powder (Omega 900, Vita) was investigated for this purpose. The powder was treated at different temperatures in the range 750–1000 °C. The fired samples were characterized in terms of their morphology and microstructure, and their mechanical and thermal properties were evaluated. The results showed that firing temperature affects porcelain microstructure influencing significantly in this way both the mechanical properties and the thermal expansion coefficient of the fired objects. Firing at 800 °C led to a homogeneous structure. After treatment at this temperature, the leucite crystals exhibit their maximum concentration and they are well dispersed into the glassy phase. As a consequence the optimum mechanical strength and the maximum thermal expansion coefficient are observed in these samples.     

Bobo revisited: What the research says.

[Correction Notice: An erratum for this article was reported in Vol 17(2) of International Journal of Play Therapy (see record 2008-14897-001). A reference was incomplete. The correct reference is Trotter, K., Eshelman, D., & Landreth, G. (2003). A place for Bobo in play therapy. International Journal of Play Therapy, 12, 117-139.] There has been some discussion in the play therapy literature regarding whether to use a Bobo doll (bop bag) in the play therapy room. The following article reviews research studies from the fields of personality, learning, and social psychology, and underlying theories to help inform and assist play therapists in their decision-making regarding Bobo. Suggestions are offered regarding future empirical research in play therapy outcomes and the choices of play materials in the playroom. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of CexZryLazOδ Mixed Oxides on the Structural and Catalytic Behavior of Monometallic Catalytic Converters Under Simulated Exhaust Conditions

The effect of CeO₂, La₂O₃ and ZrO₂ structural stabilizers/promoters, in the form of Ce_xZr_yLa_zO_δ mixed oxides, on the catalytic performance and thermal stability of monometallic (Pt), monolithic-type, Al₂O₃-washcoated three-way catalytic converters (TWCs) was investigated under simulated exhaust conditions. The evolution of textural, structural and surface behavior of Ce_xZr_yLa_zO_δ modified TWCs were identified by means of X-ray diffraction (XRD), transmission electron microscopy (TEM) and diffuse reflectance infrared spectroscopy (DRIFTS) and appropriately correlated with the catalytic behavior and thermal stability of TWCs.