A protocol for distributed simulation on a microcomputer network

The computer industry has evolved very rapidly from single-user computers to computer networks where users are able to share both local and remote files. Networks of microcomputers facilitate the integration of all information processing for distributed applications such as database processing and electronic mail. One management application of promising potential for computer networks is distributed simulation. Simulation analysis can be useful to essentially all problem-solving and decision-making on the job.

To implement a particular distributed application, computer communication between processors must be considered. Unlike expensive multiprocessor computers, networks of less-expensive microcomputers do not have pre-established communication paths between processors. This paper addresses how this obstacle may be overcome by using communication protocols based on the Open Systems Interconnection (OSI) reference model. Protocol services needed to support a distributed simulation environment will be identified, and their implementation through a prototype will then be investigated and evaluated.     

Role of heat transfer and thermal conductivity in the crystallization behavior of polypropylene‐containing additives: A phenomenological model

The thermal conductivity of a filler and the thermal conductivity of a composite made from that filler influence the heat‐transfer process during melt processing. The heat‐transfer process from the melt to the mold wall becomes an important factor in developing the skin–core morphology. These aspects were examined in this study. The thermal conductivity of polypropylene–filler composites was estimated with a standard model for various fillers such as calcium carbonate, talc, silica, wollastonite, mica, and carbon fibers. The rate of cooling under given conditions, including the melting temperature, mold wall temperature, mass of the composite, and filler content, was estimated with standard heat‐transfer equations. The time to attain the crystallization temperature for polypropylene was evaluated with a regression method with differential temperature steps. The crystallization curves were experimentally determined for the different fillers, and from them, the induction period for the onset of crystallization was estimated. These observations were correlated with the expected trends from the aforementioned formalism. The excellent fit of the curves showed that in all these cases, the thermal conductivity of the filler and composite played a dominant role in controlling the onset of the crystallization process. However, the nucleation effects became important in the later stages after the crystallization temperature was attained. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2994–2999, 2003     

Comparative wear performance of titanium based coatings for automotive applications using exhaust gas recirculation

This paper reports tribological characterization of titanium based coatings ion bonded on steel balls for automotive applications using exhaust gas recirculation (EGR). It is well known that lubricating oil drawn from EGR operated engine is contaminated with soot and higher amounts of wear debris compared to non-EGR operated engine. In this study, steel balls coated with TiN, TiAlN and TiCN are investigated in both fresh lubricating oil and EGR stressed oil for a comparative assessment of their wear characteristics in two mediums. Normal load was applied on the samples, tested against a rotating cast iron disk, simulating ring-liner interaction. In each experiment, about one quarter of disk was dipped in the oil (a) to ensure the presence of a thin oil film on the disk-ball interface during the experiment, and (b) to avoid exposure of the worn surface to atmospheric air. The results reveal that the wear rates of the coatings based on the change in the scar diameters of the samples, tested in EGR oil was 2-4 times higher than that of fresh lubricating oil. It was found that despite lowest hardness, TiN coated samples showed smaller scar diameters than TiAlN and TiCN coated samples in both lubricating oil environments. A simple geometric model was used to calculate the thickness of the coating removed as a function of the test duration. Results show that TiN coatings last for 120 min in fresh oil as compared to 30 min in the EGR oil under normal loading, whereas TiAlN and TiCN coating last for 60 and 30 min respectively in fresh oil and wear out in 15 min in EGR oil.     

Information Security Policy Development and Implementation

ABSTRACT

Development of the information security policy is a critical activity. Credibility of the entire information security program of an organization depends upon a well-drafted information security policy. Most of the stakeholders do not have time or inclination to wade through a lengthy policy document. This article tries to formulate an approach to the information security policy development that will make the policy document capture the essentials of information security as applicable to a business. The document will also convey the urgency and importance of implementing the policy, not only in letter but also in spirit.     

Optisim: A System Simulation Methodology for Optically Interconnected HPC Systems

Although CAD tools have significantly assisted electronic system simulation, the system-level optoelectronics modeling field has lagged behind due to a lack of simulation methodologies and tools. Optisim, a system-level modeling and simulation methodology of optical interconnects for HPC systems, can provide computer architects, designers, and researchers with a highly optimized, efficient, and accurate discrete-event environment to test various HPC systems.     

Stochastic and Dynamic Shipper Carrier Network Design Problem

The focus of this work is to determine the optimal storage capacity to be installed on transhipment nodes by shippers in a dynamic shipper carrier network under stochastic demand. A two stage linear program with recourse formulation is developed where in the first stage, the shipper decides the optimal capacity to be installed on transhipment nodes. In the second stage, the shipper chooses a routing strategy based on the realized demand. The performance of the following solution methods: Stochastic L Shaped Method, Regularized Decomposition and L Shaped Method with preliminary cuts were compared for various network sizes and numerous demand scenarios. A novel capacity shifting heuristic was introduced to generate a feasible implementable solution which significantly improves the performance of Regularized Decomposition and provides the best performance in the cases tested. Various ways of generating analytical bounds on the objective function value was discussed. The new capacity shifting heuristic was found to be efficient in generating tight upper bounds. Even though the formulation considered in this paper is for a single commodity, the model can be easily extended to account for multiple commodities.     

Synthesis and characterisation of neem leaf extract, 2, 3‐dehydrosalanol and quercetin dihydrate mediated silver nano particles for therapeutic applications

The utility of green silver nanoparticles (AgNPs) in veterinary medicine is steadily increasing as they have many therapeutic applications against pathogens and arthropods of livestock. In this study, green AgNPs using neem (N‐AgNPs), 2,3‐dehydrosalanol (2,3‐DHS‐AgNPs) and quercetin dihydrate (QDH‐AgNPs) were synthesised and characterised. Synthesised compounds were characterised by UV‐Vis spectroscopy and the peak absorbance was recorded at 370 nm for neem extract. For N‐AgNPs, 2,3‐DHS‐AgNPs and QDH‐AgNPs, the maximum absorbance peaks were at 430, 230 and 220 nm, respectively. The FTIR analysis confirmed the synthesis of green AgNPs. The XRD pattern of N‐AgNPs showed the peaks corresponding to whole spectra of 2 θ values ranging from 10–80. The relatively higher intensity of (111, 222) planes in face centred cubic crystalline structure supports the formation of synthesised AgNPs. In DLS analysis, the hydrodynamic diameter of neem leaf extract was found to be 259.8 nm, followed by 5.3, 6.7 and 261.8 nm for 2,3‐DHS‐AgNPs, N‐AgNPs and QDH‐AgNPs, respectively. Based on the transmission electron microscopy and scanning electron microscopy image analyses, confirmed the formation of N‐AgNPs, 2,3‐DHS‐AgNPs and QDH‐AgNPs. These eco‐friendly phyto‐AgNPs may be of use as an effective alternative to chemical control methods against the arthropods of livestock.Inspec keywords: nanoparticles, silver, nanomedicine, biomedical materials, nanofabrication, Fourier transform infrared spectra, ultraviolet spectra, visible spectra, X‐ray diffraction, light scattering, transmission electron microscopy, scanning electron microscopy, aggregation, veterinary medicineOther keywords: 2,3‐dehydrosalanol mediated silver nanoparticles, quercetin dihydrate mediated silver nanoparticles, therapeutic applications, green silver nanoparticles, veterinary medicine, Azadirachta indica, UV‐visible spectroscopy, Fourier transformed infrared analysis, X‐ray diffraction, (111) planes, (222) planes, face centred cubic crystalline structure, dynamic light scattering, hydrodynamic diameter, aqueous neem leaf extract, transmission electron microscopy, hexagonal shape, pencil head shape, cuboid shape, scanning electron microscopy, aggregation, arthropod infesting livestock, Ag, in‐vivo antiectoparasitic activity, in‐vitro antiectoparasitic activity     

Solution to profit based unit commitment problem using particle swarm optimization

In this paper, an algorithm to solve the profit based unit commitment problem (PBUCP) under deregulated environment has been proposed using Particle Swarm Optimization (PSO) intelligent technique to maximize the GENCOs profit. Deregulation in power sector increases the efficiency of electricity production and distribution, offer lower prices, higher quality, a secure and a more reliable product. The proposed algorithm has been developed from the view point of a generation company wishing to maximize its profit in the deregulated power and reserve markets. UC schedule depends on the market price in the deregulated market. In deregulated environment utilities are not required to meet the demand. GENCO can consider a schedule that produce less than the predicted load demand and reserve but creates maximum profit. More number of units are committed when the market price is higher. When more number of generating units are brought online more power is generated and participated in the deregulated market to get maximum profit. This paper presents a new approach of GENCOs profit based unit commitment using PSO technique in a day ahead competitive electricity markets. The profit based unit commitment problem is solved using various PSO techniques such as Chaotic PSO (CPSO), New PSO (NPSO) and Dispersed PSO (DPSO) and the results are compared. Generation, spinning reserve, non-spinning reserve, and system constraints are considered in proposed formulation. The proposed approach has been tested on IEEE-30 bus system with 6 generating units as an individual GENCO. The results obtained are quite encouraging and useful in deregulated market. The algorithm and simulation are carried out using Matlab software.