A 10-s doping technology for the application of low-temperaturepolysilicon TFTs to giant microelectronics

A bucket-type high-density (0.25-1.2-mA/cm²) low-energy (500-2000 V) ion source was utilized for high-speed phosphorus doping directly into a thin polysilicon layer without cap SiO₂. Doping gas with He dilution was selected to reduce etching of polysilicon film. Excimer laser (XeCl, 8 mm×8 mm) pulse annealing was introduced to activate effectively the doped impurity. The combination of these techniques provided a practically low sheet resistance for the TFT source, drain, and gate with a short time doping. The low-temperature polysilicon TFT fabricated with a doping time of 10 s had characteristics comparable to those of that fabricated by a longer time doping or conventional ion implantation, showing the practicality of this technology and its promise for giant microelectronics     

Changes in Aging Behavior and Defect Structure of Yttria-Fully-Stabilized ZrO2 with Sc2O3 Doping

Methods of suppressing decreased conductivity in 8 mol% Y₂O₃-stabilized–92 mol% ZrO₂ (8YSZ) with aging were investigated. Different amounts of Sc₂O₃ were doped into 8YSZ. The electrochemical properties of Sc₂O₃-doped 8YSZ were measured, and the microstructural and local structural changes were characterized. The present results indicate that an appropriate amount of Sc₂O₃ doping, 3 or 4 mol%, effectively suppresses decreased conductivity with aging in 8YSZ.     

Interface potential of calcium phosphate in simulated body fluid

Calcium phosphate ceramics are used in the substitution of injured or damaged bones. Nevertheless, the behaviour of these materials, and in particular, the mechanisms guiding their interface response in physiological environment is still unknown. This work describes the construction of hydroxyapatite and tricalcium phosphate electrodes used to determine the interface potential behaviour of these materials in a simulated body fluid, in a pH range corresponding to the variation observed in human body injuries, at ambient and physiological temperatures. These measurements are associated with the adsorption/desorption of ions from the materials. The results show that hydroxyapatite and tricalcium phosphate have similar behaviour in that they reach an interface potential equilibrium state faster when the solution pH is decreased and the temperature increased. This behaviour may be attributed to their ability to form a calcium-rich layer and is relevant to their quality as implantable materials.     

An integrated approach to concept evaluation in a new product development

A new product development (NPD) process can be thought as a comprehensive process in which the design is progressively detailed through a series of phases. At the end of each phase a design review is held to approve the design and release or not it to the next level. As one of these phases, concept selection aiming to select the most appropriate concept for further development, is conducted earlier in the process. As the further development progresses on a selected concept, it becomes more difficult to make design changes in terms of cost and schedule dimensions, and therefore, selecting the best concept among a set of available alternatives has been an important issue for companies. On the other hand, in the presence of many alternatives and selection criteria, the selection problem becomes a multiple-criteria decision making concept selection problem. To solve this problem, in this work, an integrated approach bringing two popular methods together: the modified technique for order preference by similarity to ideal solution (TOPSIS) and the analytical network process (ANP). The ANP method is used to determine the relative weights of a set of quantitative and qualitative evaluation criteria, as the modified TOPSIS method utilized to rank competing concept alternatives. In addition, a real example is presented to demonstrate the effectiveness and applicability of the proposed approach for potential practitioners and readers.     

Hydrothermal preparation of tailored hydroxyapatite

Hydrothermal vapor treatment method was applied for preparation of ceramic biomaterials. Hydroxyapatite (Ca₁₀(PO₄)₆(OH)₂; HA) ceramics prepared by sintering with random crystal surface have already been used as bone-repairing materials which can directly bond to natural bones. If materials of HA could have the tailored specific crystal surface, they should have the advantage of adsorptive activity and osteoconductivity in comparison with the sintered HA. In the present study, porous HA sheets of about 50 μm to 1 mm in thickness and porous HA granules of about 50 μm to 1 mm in size with tailored crystal surface were prepared by the hydrothermal vapor exposure method at temperatures below 200°C. Porous sheets and porous granules of HA with controlled crystal surface should be suitable for scaffold of cultured bone, for bone graft material and for drug delivery system (DDS).     

Demonstration of a fully spatial coherent X-ray laser at 13.9 nm

We have recently reported the successful development of a fully coherent X-ray laser (XRL) at 13.9 nm by an oscillator-amplifier configuration with two targets. In the experiment, a seed XRL beam from the first target is injected into a plasma amplifier at the second target. The observed XRL beam has full spatial coherence and 0.2 mrad of nearly diffraction-limited divergence. In order to improve the output fluence, the amplification properties of the XRL beam have been investigated using various plasma lengths of the second amplifier target. The output energy has been improved by a factor of ten, increasing the length of the gain region to 10 mm, resulting in about 0.2 /spl mu/J of output energy.     

Growth of AgGaTe2 and AgAlTe2 Layers for Novel Photovoltaic Materials

AgGaTe₂ and AgAlTe₂ layers were grown on a-plane sapphire substrates by closed-space sublimation. These compounds replace Cd in CdTe with group I and III elements, and are, hence, expected to be ideal novel candidate materials for solar cells. The grown layers were confirmed to be stoichiometric AgGaTe₂ and AgAlTe₂ by x-ray diffraction (XRD). The AgAlTe₂ layers had strong preference for the (112) orientation. The XRD spectrum of the AgGaTe₂ layer was different from that of the AgAlTe₂ layer, and strong peaks were observed for (103) and (110) diffraction. The variation in orientations of the grown layers was analyzed in detail by use of XRD pole figures, which revealed that the AgGaTe₂ layers had an epitaxial relationship with the a-plane sapphire substrates.     

Low‐cost dye‐sensitized solar cells with ball‐milled tellurium‐doped graphene as counter electrodes and a natural sensitizer dye

This paper presents a facile and economic development of dye‐sensitized solar cells using a nonprecious counter electrode made from ball‐milled tellurium‐doped graphene (Te‐Gr) and a natural sensitizer extracted from Calotropis gigantea leaves. The prepared materials were characterized using various techniques, such as Raman spectroscopy, X‐ray diffraction (XRD), atomic force microscopy (AFM), impedance spectroscopy, and scanning electron microscopy with built‐in energy‐dispersive X‐ray spectroscopy (SEM with EDS). The electrochemical activity of the produced counter electrodes and the impedance of the fabricated cells were examined and discussed to devise plans for future enhancement of cell performance. A clear pattern of improvement was found when using cost‐effective Te‐Gr relative to the costly platinum counter electrodes, especially when compared with cells employing another natural sensitizer. The results show approximately 51% enhancement over chlorophyll‐based cells made from spinach, where the added advantage in our approach is the utilization of an abundant plant extract with little nutritional appeal.