Viscoelastic State for the Solutions of Spherically Symmetric Viscoelasticity Problems

The solutions of the spherically symmetric, linear, isothermal, and transient viscoelasticity problems via reciprocity theorem have been investigated for a specific material. The integral form of stress–strain relations has been used. The Laplace transform of a viscoelastic state, which is necessary for the integral equation arising as a result of reciprocity theorem, has been derived. This integral equation has been solved by Laplace transform. A sample problem has been solved to test the presented formulation. A numerical application of the analytic solution of this problem has been given.     

Electrical and optical properties of fluorine-doped CdO films deposited by ultrasonic spray pyrolysis

The CdO:F samples have been deposited onto microscope glass substrates at 250 °C by ultrasonic spray pyrolysis method. With the incorporation of fluorine into CdO, the direct optical transition has shifted towards the shorter wavelengths, and the transparency of the material has increased at a given wavelength above the fundamental absorption edge. The shift in the absorption edge is explained by means of the Moss–Burstein effect, which is also supported with the results of the current–voltage characteristics. Here, a correlation has been established between the band broadening and the increase in conductivity due to the increase in carrier density.     

PHASE EQUILIBRIUM FOR TERNARY LIQUID SYSTEMS OF WATER CARBOXYLIC ACID CHLORINATED HYDROCARBON: THERMODYNAMIC MODELING THROUGH SERLAS

Liquid-liquid equilibrium data of the solubility (binodal) curves and tie-line end compositions are presented for mixtures of [water (1) + formic acid, or acetic acid, or propanoic acid (2) + chlorobenzene, or 1,2-dichloroethane (3)] at T = 293.2 K and P = 101.3 ± 0.7 kPa. A log-basis approach, SERLAS (solvation energy relation for liquid-associated system), has been proposed to estimate the properties and liquid-liquid equilibrium (LLE) of associated systems containing proton-donating and -accepting and polar components capable of a physical interaction through hydrogen bonding or dipole-dipole interaction. The tie lines were also correlated using the UNIFAC-original model. The reliability of the models has been analyzed against the LLE data with respect to the distribution coefficient and separation factor. The proposed model appears to be an improvement in data fit for the ternary systems, yielding a mean relative error of 10.1% for all the systems considered.     

Hydrothermal derived nanostructure rare earth (Er,Yb)-doped ZnO: structural,optical and electrical properties

The structural, optical and electrical properties of undoped and rare-earth (Er, Yb) doped zinc oxide (ZnO) nanopowder samples synthesized by hydrothermal method were investigated. The obtained samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive spectroscopy. The optical properties of undoped and rare-earth (Er, Yb) doped ZnO were carried out with UV–visible diffuse reflectance spectroscopy techniques. XRD results reveal that Yb and Er doped ZnO nanopowders have single phase hexagonal (Wurtzite) structure without any impurities. SEM analysis indicate that dopants with different radii affected the surface morphology of ZnO nanostructures. The optical band gap of all samples were calculated from UV–Vis diffuse reflectance spectroscopy data. We have obtained band gap values of undoped, Er and Yb doped ZnO as 3.24, 3.23, 3.22 eV, respectively. Electrical characterization of the samples were made in the 280–350 K temperature range using Van der Pauw method based on Hall effect measurement. The carrier concentrations decreased for both Er and Yb doping while the Hall mobility and electrical resistivity increased with Yb, Er doping compared to undoped ZnO nanopowder at room temperature. The temperature dependent resistivity measurements of Er doped ZnO showed a metal–semiconductor transition at about 295 K, while Yb doped ZnO showed characteristic semiconductor behavior.     

Routing table updating by using intelligent agents

In a network, one of the important problems is making an efficient routing decision. Many studies have been carried out on making a decision and several routing algorithms have been developed. In a network environment, every node has a routing table and these routing tables are used for making routing decisions. Nowadays, intelligent agents are used to make routing decisions. Intelligent agents have been inspired by social insects such as ants. One of the intelligent agent types is self a cloning ant. In this study, a self cloning ant colony approach is used. Self cloning ants are a new synthetic ant type. This ant assesses the situation and multiplies through cloning or destroying itself. It is done by making a routing decision and finding the optimal path. This study explains routing table updating by using the self cloning ant colony approach. In a real net, this approach has been used and routing tables have been created and updated for every node.     

An on-chip cell culturing and combinatorial drug screening system

A low-cost, convenient and precise drug combination screening microfluidic platform is developed, in which cell culture chambers designed with micropillars integrate with three laminar flow diffusion channels. This platform has several distinct features, including minimum shear stress on cells, biocompatibility, optimum concentration distribution and automatic combinatorial gradient generation, which can potentially speed up the discovery of an effective drug combination for cancer ablations. The presented device can generate two-drug combination gradients at the optimum flow rate of 90 μL/h and can be applied to identify the optimal combination of two clinically relevant chemotherapy drugs. For demonstration, paclitaxel at 0.77 × 10^?3 mg/mL and cisplatin at 0.23 × 10^?4 mg/mL were studied against lung cancer cells (A549). This microfluidic device has the potential to provide a precise and robust screening for anticancer combinational drugs practiced in clinics.     

Converting numerical classification into text classification

Consider a supervised learning problem in which examples contain both numerical- and text-valued features. To use traditional feature-vector-based learning methods, one could treat the presence or absence of a word as a Boolean feature and use these binary-valued features together with the numerical features. However, the use of a text-classification system on this is a bit more problematic—in the most straight-forward approach each number would be considered a distinct token and treated as a word. This paper presents an alternative approach for the use of text classification methods for supervised learning problems with numerical-valued features in which the numerical features are converted into bag-of-words features, thereby making them directly usable by text classification methods. We show that even on purely numerical-valued data the results of text classification on the derived text-like representation outperforms the more naive numbers-as-tokens representation and, more importantly, is competitive with mature numerical classification methods such as C4.5, Ripper, and SVM. We further show that on mixed-mode data adding numerical features using our approach can improve performance over not adding those features.     

Determination of the energy savings and the optimum insulation thickness in the four different insulated exterior walls

The optimum insulation thickness of the external wall for four cities from four climate zones of Turkey, energy savings over a lifetime of 10 years and payback periods are calculated for the five different energy types and four different insulation materials applied externally on walls. Extruded polystyrene, expanded polystyrene, nil siding and rock wool as wall insulation material are selected. In this study, the net energy cost savings are calculated using the P₁–P₂ method. The results show that energy cost savings vary between 4.2 $/m² and 9.5 $/m² depending on the city and insulation materials. The highest payback period value with 2.25 years in Mersin found by using natural gas as an energy source for heating, while the lowest value is reached by using LPG as an energy source in Bitlis.