Maximization of total surface area of Pt-SnO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst by the Taguchi method

The maximization of the total surface area of Pt-SnO₂/Al₂O₃ catalyst was studied by using the Taguchi method of experimental design. The catalysts were prepared by sol-gel method. The effects of HNO₃, H₂O and aluminum nitrate concentrations and the stirring rate on the total surface area were studied at three levels of each. L₉ orthogonal array leading nine experiments was used in the experimental design. The parameter levels that give maximum total surface area were determined and experimentally verified. In the range of conditions studied it was found that, medium levels of HNO₃ and H₂O concentration and lower levels of aluminum nitrate concentration and stirring rate maximize the total surface area.     

Films formed from polystyrene latex/clay composites: A fluorescence study

This study reports a steady-state fluorescence (SSF) technique for studying film formation from surfactant-free polystyrene (PS) latex and Na-montmorillonite (SNaM) composites. The composite films were prepared from pyrene (P)-labeled PS particles and SNaM clay at room temperature and annealed at elevated temperatures in 10-min intervals above glass transition temperature (t₃) of polystyrene. During the annealing processes, the transparency of the film improved considerably. Scattered light (I_s) and fluorescence intensity (I_p) from P were measured after each annealing step to monitor the stages of film formation. Evolution of transparency of composite films was monitored by using photon transmission intensity, I_tr. Scanning electron microscopy (SEM) was used to detect the variation in physical structure of annealed composite films. Minimum film formation temperature, T_q, and healing temperatures, T_h, were determined. Void closure and interdiffusion stages were modeled and related activation energies were determined. It was observed that both activation energies increased as the percent of SNaM was increased in composite films.     

Studying high impact fix-inducing changes

As software systems continue to play an important role in our daily lives, their quality is of paramount importance. Therefore, a plethora of prior research has focused on predicting components of software that are defect-prone. One aspect of this research focuses on predicting software changes that are fix-inducing. Although the prior research on fix-inducing changes has many advantages in terms of highly accurate results, it has one main drawback: It gives the same level of impact to all fix-inducing changes. We argue that treating all fix-inducing changes the same is not ideal, since a small typo in a change is easier to address by a developer than a thread synchronization issue. Therefore, in this paper, we study high impact fix-inducing changes (HIFCs). Since the impact of a change can be measured in different ways, we first propose a measure of impact of the fix-inducing changes, which takes into account the implementation work that needs to be done by developers in later (fixing) changes. Our measure of impact for a fix-inducing change uses the amount of churn, the number of files and the number of subsystems modified by developers during an associated fix of the fix-inducing change. We perform our study using six large open source projects to build specialized models that identify HIFCs, determine the best indicators of HIFCs and examine the benefits of prioritizing HIFCs. Using change factors, we are able to predict 56 % to 77 % of HIFCs with an average false alarm (misclassification) rate of 16 %. We find that the lines of code added, the number of developers who worked on a change, and the number of prior modifications on the files modified during a change are the best indicators of HIFCs. Lastly, we observe that a specialized model for HIFCs can provide inspection effort savings of 4 % over the state-of-the-art models. We believe our results would help practitioners prioritize their efforts towards the most impactful fix-inducing changes and save inspection effort.     

Design,development and modelling of single actuated,compliant and symmetrical multi link hopping mechanism

Journal of Mechanical Science and Technology - In this study, we present the design and development of a compliant multi-link hopping mechanism actuated by a single DC motor. Mechanism consists of...     

Using of Photoluminescent Tile for Evacuation of the Buildings During Electrical Failure

Photoluminescent pigments could be successfully applied on the wall tiles, floor tiles and porcelain tiles as well as glass substrates （glass mosaics, borders, and cutted glass with various designs）. For this applications, these products can be used for different purposes. In this study, these pigments are applied on the ceramic tiles and glass mosaics/tiles with traditional ceramic production line. These products are intentended to provide guidance in the event of a power failure. With this study also aimed to prevent potential accidents and injury during evacuation of building.     

Poly(ε‐caprolactone) composites containing gentamicin‐loaded β‐tricalcium phosphate/gelatin microspheres as bone tissue supports

In this work, novel antibacterial composites were prepared by using poly(ε‐caprolactone) (PCL) as the main matrix material, and gentamicin‐loaded microspheres composed of β‐tricalcium phosphate (β‐TCP) and gelatin. The purpose is to use this biodegradable material as a support for bone tissue. This composite system is expected to enhance bone regeneration by the presence of β‐TCP and prevent a possible infection that might occur around the defected bone region by the release of gentamicin. The effects of the ratio of the β‐TCP/gelatin microspheres on the morphological, mechanical, and degradation properties of composite films as well as in vitro antibiotic release and antibacterial activities against Escherichia coli and Staphylococcus aureus were investigated. The results showed that the composites of PCL and β‐TCP/gelatin microspheres had antibacterial activities for both bacteria. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Investigation of hybrid‐capacitor properties of ruthenium complexes

Ru complexes were successfully produced, and their structural properties were investigated using FTIR, Raman, and single crystal XRD patterns. The HOMO, LUMO, Eg, and electronic surface potential (ESP) values of the molecules were calculated by a Gaussian program. The complexes were used for producing hybrid capacitor cells as electrode materials. According to electrochemical analysis, complex 2 showed the best CV graph between ?1 V and +1 V and had the highest current value and hysteresis area when compared with the other complexes. The performance analysis and the capacity fade of the cells were investigated. The first capacity values of the complexes were 57.5, 22.1, 16.9, and 0.0021 F/g for complexes 1 , 2 , 3 , and 4 , respectively. The capacitive mechanism of the cells as relates to molecular interactions was also investigated. We suggested that the ESP values of the molecules were directly related to the capacitive performance of the cells. In addition to this, the best cycling performance was obtained for complex 2, which has the lowest Eg value among the complexes. We speculate that the charged regions on the complex materials have a crucial role in the increasing the capacitance of the cells.