A Statistical Model for Early Detection of DDoS Attacks on Random Targets in SDN

Wireless Personal Communications - Software Defined Networks (SDNs) have accelerated and simplified the management, configuration and error detection in today’s networking systems. However,...     

Finite element analysis of a center crack specimen warm pre-stressed under different modes of loading

Load bearing capacity of cracked specimens can be improved following pre-loading procedures like warm pre-stressing (WPS). In this paper, the effects of modes I and II pre-loading on fracture load of a central angled crack specimen are studied by finite element analysis. The specimen is reloaded either in mode I or in mode II. To predict the fracture load of cracked specimen after pre-loading, the maximum tensile stress (MTS) and maximum shear stress (MSS) criteria are used. It is shown that mode II fracture load is independent of pre-loading but the mode I fracture load is highly improved after warm pre-stressing. The mode mixity of the specimen is also changed when the pre-loading and reloading modes are not identical. An increase in the fracture load of the specimen following pre-loading may be due to change of failure mode as predicted by finite element analysis in this work.     

Inversion of inhomogeneous continuously varying dielectric profilesusing open-ended waveguides

The problem of reconstructing one-dimensional inhomogeneous, continuously varying dielectric profiles using open-ended waveguides is studied. The measured or available data-which are actually simulated here-consist of the self-admittance of the open-ended waveguide ending in a flange, put in contact with the dielectric medium to be inverted. The self-admittance of the waveguide radiating into the medium is then formulated. Choosing the Levenberg-Marquardt optimization algorithm, a search for a multilayered model with a sufficient number of layers-using successive refinements-is carried out until the admittance of the trial medium agrees closely, within a certain tolerance, with the admittance of the actual medium     

An integrated fuzzy regression-data envelopment analysis algorithm for optimum oil consumption estimation with ambiguous data

This study introduces an integrated fuzzy regression (FR) data envelopment analysis (DEA) algorithm for oil consumption estimation and optimization with uncertain and ambiguous data. This is quite important as oil consumption estimations deals with several uncertainties due to social, economic factors. Furthermore, DEA is integrated with FR because there is no clear cut as to which FR approach is superior for oil consumption estimation. The standard indicators used in this paper are population, cost of crude oil, gross domestic production (GDP) and annual oil production. Fifteen popular and most cited FR models are considered in the algorithm. Each FR model has different approach and advantages. The input data is divided into train and test data. The FR models have been tuned for all their parameters according to the train data, and the best coefficients are identified. Center of Average Method for defuzzification output process is applied. For determining the rate of error of FR models estimations, the rate of defuzzified output of each model is compared with its actual rate consumption in test data. The efficiency of 15 FR models is examined by the output-oriented Data Envelopment Analysis (DEA) model without inputs by considering three types of relative error: RMSE, MAE and MAPE. The applicability and superiority of the proposed algorithm is shown for monthly oil consumption of Canada, United States, Japan and Australia from 1990 to 2005.     

A novel algorithm for layout optimization of injection process with random demands and sequence dependent setup times

Injection molding is an ideal manufacturing process for producing high volumes of products from both thermoplastic and thermo setting materials. Nevertheless, in some cases, this type of manufacturing process decelerates the production rate as a bottleneck. Thus, layout optimization plays a crucial role in this type of problem in terms of increasing the efficiency of the production line. In this regard, a novel computer simulation–stochastic data envelopment analysis (CS-SDEA) algorithm is proposed in this paper to deal with a single row job-shop layout problem in an injection molding process. First, the system is modeled with discrete-event-simulation as a powerful tool for analyzing complex stochastic systems. Then, due to lack of information about some operational parameters, theory of uncertainty is imported to the simulation model. Finally, an output-oriented stochastic DEA model is used for ranking the outputs of simulation model. The proposed CS-SDEA algorithm is capable of modeling and optimizing non-linear, stochastic, and uncertain injection process problems. The solution quality is illustrated by an actual case study in a refrigerator manufacturing company.     

Surface modification of ultra‐high‐molecular‐weight polyethylene. II. Effect on the physicomechanical and tribological properties of ultra‐high‐molecular‐weight polyethylene/poly(ethylene terephthalate) composites

We performed surface modification of ultra‐high‐molecular‐weight polyethylene (UHMWPE) through chromic acid etching, with the aim of improving the performance of its composites with poly(ethylene terephthalate) (PET) fibers. In this article, we report on the morphology and physicomechanical and tribological properties of modified UHMWPE/PET composites. Composites containing chemically modified UHMWPE had higher impact properties than those based on unmodified UHMWPE because of improved interfacial bonding between the polymer matrix and the fibers and better dispersion of the fibers within the modified UHMWPE matrix. Chemical modification of UHMWPE before the introduction of PET fibers resulted in composites exhibiting improved wear resistance compared to the base material and compared to unmodified UHMWPE/PET composites. On the basis of the morphological studies of worn samples, microploughing and fatigue failure associated with microcracking were identified as the principle wear mechanisms. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Visual learning and classification of human epithelial type 2 cell images through spontaneous activity patterns

Identifying the presence of anti-nuclear antibody (ANA) in human epithelial type 2 (HEp-2) cells via the indirect immunofluorescence (IIF) protocol is commonly used to diagnose various connective tissue diseases in clinical pathology tests. As it is a labour and time intensive diagnostic process, several computer aided diagnostic (CAD) systems have been proposed. However, the existing CAD systems suffer from numerous shortcomings due to the selection of features, which is commonly based on expert experience. Such a choice of features may not work well when the CAD systems are retasked to another dataset. To address this, in our previous work, we proposed a novel approach that learns a set of filters from HEp-2 cell images. It is inspired by the receptive fields in the mammalian's vision system, since the receptive fields can be thought as a set of filters for similar shapes. We obtain robust filters for HEp-2 cell classification by employing the independent component analysis (ICA) framework. Although, this approach may be held back due to one particular problem; ICA learning requires a sufficiently large volume of training data which is not always available. In this paper, we demonstrate a biologically inspired solution to address this issue via the use of spontaneous activity patterns (SAP). The spontaneous activity patterns, which are related to the spontaneous neural activities initialised by the chemical release in the brain, are found as the typical stimuli for the visual cell development of newborn animals. In the classification system for HEp-2 cells, we propose to model SAP as a set of small image patches containing randomly positioned Gaussian spots. The SAP image patches are generated and mixed with the training images in order to learn filters via the ICA framework. The obtained filters are adopted to extract the set of responses from a HEp-2 cell image. We then employ regions from this set of responses and stack them into “cubic regions”, and apply a classification based on the correlation information of the features. We show that applying the additional SAP leads to a better classification performance on HEp-2 cell images compared to using only the existing patterns for training ICA filters. The improvement on classification is particularly significant when there are not enough specimen images available in the training set, as SAP adds more variations to the existing data that makes the learned ICA model more robust. We show that the proposed approach consistently outperforms three recently proposed CAD systems on two publicly available datasets: ICPR HEp-2 contest and SNPHEp-2.     

Maintenance Scheduling Optimization in a Multiple Production Line Considering Human Error

An analytical multiobjective maintenance planning model that maximizes reliability while minimizing cost and human error is proposed. In order to incorporate human error, the model minimizes the maximum human error over the planning horizon. Human Error Assessment and Reduction Technique (HEART) is used to quantify the human error. Maintenance activities include adjustment and replacement activities, in which each of them consumes a certain amount of human resource, spare parts, and budget and brings about a specified level of reliability and human error. Economic dependence is also considered, in which grouping maintenance activities reduces total cost. However, this may increase human error probability due to operator fatigue or time pressure. The main purpose is to investigate the relationship between human factors and maintenance activities to find the preferred maintenance plan. A multiple production line is considered as a case study. A sensitivity analysis is performed, and the effects of grouping and human factors on the preferred maintenance plan are discussed. It is shown how human proficiency may affect reliability and cost.     

Semantic weaving of configuration fragments into a consistent system configuration

Configuration fragments developed separately and focusing on different aspects, such as availability, security or performance of a system need to be integrated into a consistent system configuration to avoid system malfunctions. The main challenges of such integration are due to the overlapping entities and the integration relations between the entities of the different configuration fragments. In this paper we propose a model based approach for a consistent integration of configuration fragments into a system configuration. We use and extend the model weaving technique to capture the semantics of the relations between the entities of the configuration fragments. Moreover, we generate automatically the constraints corresponding to these semantic relations to complete the target system configuration profile. These constraints can be used to guard the configuration consistency during runtime modifications.