From embedded sensors to sensorial materials—The road to function scale integration

Ubiquitous computing is about to become part of our everyday lives by integrating hundreds of “invisible” to us computing devices in our environment, so that they can unobtrusively and constantly assist us. This will imply more and smaller “invisible” sensors, homogeneously distributed and at the same time densely packed in host materials, responding to various stimuli and immediately delivering information. In order to reach this aim, the embedded sensors should be integrated within the host material, heading towards sensorial materials. The first step is to omit all parts that are not needed for the sensorial task and to find new solutions for a gentle integration. This is what we call function scale integration. The paper discusses sensor embedding in the human hand as an example of integration in nature, new technological applications and main challenges associated with this approach.     

The effect of multi-walled carbon nanotubes addition on the thermo-oxidative decomposition and flammability of PP/MWCNT nanocomposites

Studies of thermo-oxidative and fire-resistant properties of the polypropylene/multi-walled carbon nanotube composites (PP/MWCNT) prepared by melt intercalation are discussed. The effective kinetic parameters of the PP/MWCNT thermo-oxidative decomposition were computed according to the model-based kinetic analysis. The thermo-oxidative decomposition behavior of PP/MWCNT and stabilizing effect caused by addition of MWCNT has been investigated by means of TGA and EPR spectroscopy. Comparative analysis of the flammability characteristics for PP-clay/MWCNT nanocomposites was provided in order to emphasize the specific behavior of the nanocomposites.     

Optical spectroscopic and electrochemical characterization of oxide films on a ferritic stainless steel

Colored oxide films that form on ferritic stainless steel in a high-temperature, oxidizing environment and correspond to different chemical compositions can cause a deterioration of pitting resistance and corrosion performance. Herein, optical spectroscopic and electrochemical techniques have been used to reveal the relationship between color, chemical composition, and corrosion resistance of oxide films formed in the temperature range from 400°C to 800°C for 30 min and at 800°C for 10, 20, 30, and 60 min. The substrate with a thin and dense passivation film leads to a low pitting potential but high corrosion resistance. Oxide films of yellowish or brownish color formed below 600°C are mainly iron oxides, which correspond to low corrosion resistance. No passivation characteristics can be observed for polarization curves of oxide films formed at 500°C and 600°C. The color of oxide films varies from blue to dark gray with the increase of oxidation time at 800°C. Corrosion resistance changes with different proportions of Fe₃O₄, Cr₂O₃, and FeCr₂O₄. The gray oxide films formed at 800°C for 30 min exhibit the lowest pitting susceptibility and the highest corrosion resistance.     

Genetic Biomarkers of Antipsychotic-Induced Prolongation of the QT Interval in Patients with Schizophrenia

Antipsychotics (AP) induced prolongation of the QT interval in patients with schizophrenia (Sch) is an actual interdisciplinary problem as it increases the risk of sudden death syndrome. Long QT syndrome (LQTS) as a cardiac adverse drug reaction is a multifactorial symptomatic disorder, the development of which is influenced by modifying factors (APs’ dose, duration of APs therapy, APs polytherapy, and monotherapy, etc.) and non-modifying factors (genetic predisposition, gender, age, etc.). The genetic predisposition to AP-induced LQTS may be due to several causes, including causal mutations in the genes responsible for monoheme forms of LQTS, single nucleotide variants (SNVs) of the candidate genes encoding voltage-dependent ion channels expressed both in the brain and in the heart, and SNVs of candidate genes encoding key enzymes of APs metabolism. This narrative review summarizes the results of genetic studies on AP-induced LQTS and proposes a new personalized approach to assessing the risk of its development (low, moderate, high). We recommend implementation in protocols of primary diagnosis of AP-induced LQTS and medication dispensary additional observations of the risk category of patients receiving APs, deoxyribonucleic acid profiling, regular electrocardiogram monitoring, and regular therapeutic drug monitoring of the blood APs levels.     

Recent developments in modelling of microhardness saturation during SPD processing of metals and alloys

Ultrafine-grained and even nanostructured materials can be fabricated using severe plastic deformation to ultra-high strains in equal-channel angular pressing (ECAP), high-pressure torsion (HPT), machining and their combinations, such as machining of ECAP specimens, HPT of ECAP billets and HPT of machining chips. This report presents recent results of investigations of the microstructures and microtextures of pure copper, nickel and aluminium subjected to different deformation processes to ultimately high imposed strains. A comparison of the microstructure, dislocation density and microhardness developed during combinations of different strain paths is performed. All characteristics were analysed by X-ray, transmission and scanning electron microscopy, and electron backscatter diffraction (EBSD). The influence of different processing routes is discussed in terms of the accumulated strain and microstructure refinement. The saturation in grain refinement is examined with reference to the recovery taking place during ultra-high strain deformation. A phenomenological model based on the Voce equation is applied for fitting parameters based on the experimental data and this is suggested for a prediction of microhardness evolution for pure metals (Ag, Au) and Cu-based (Zn, Al) alloys.     

Engineering the Catalytic Properties of Two-Domain Laccase from Streptomyces griseoflavus Ac-993

Laccases catalyze the oxidation of substrates with the concomitant reduction of oxygen to water. Recently, we found that polar residues located in tunnels leading to Cu2 and Cu3 ions control oxygen entrance (His 165) and proton transport (Arg 240) of two-domain laccase (2D) from Streptomyces griseoflavus (SgfSL). In this work, we have focused on optimizing the substrate-binding pocket (SBP) of SgfSL while simultaneously adjusting the oxygen reduction process. SgfSL variants with three single (Met199Ala, Met199Gly, and Tyr230Ala) and three double amino acid residues substitutions (Met199Gly/His165Ala, His165Ala/Arg240His, Met199Gly/Arg240His) were constructed, purified, and investigated. Combination of substitutions in the SBP and in the tunnel leading to Cu2 ion (Met199Gly/Arg240His) increased SgfSL catalytic activity towards ABTS by 5-fold, and towards 2.6-DMP by 16-fold. The high activity of the Met199Gly/Arg240His variant can be explained by the combined effect of the SBP geometry optimization (Met199Gly) and increased proton flux via the tunnel leading to Cu2 ion (Arg240His). Moreover, the variant with Met199Gly and His165Ala mutations did not significantly increase SgfSL’s activity, but led to a drastic shift in the optimal pH of 2.6-DMP oxidation. These results indicate that His 165 not only regulates oxygen access, but it also participates in proton transport in 2D laccases.     

Y98 Mutation Leads to the Loss of RsfS Anti-Association Activity in Staphylococcus aureus

Ribosomal silencing factor S (RsfS) is a conserved protein that plays a role in the mechanisms of ribosome shutdown and cell survival during starvation. Recent studies demonstrated the involvement of RsfS in the biogenesis of the large ribosomal subunit. RsfS binds to the uL14 ribosomal protein on the large ribosomal subunit and prevents its association with the small subunit. Here, we estimated the contribution of RsfS amino acid side chains at the interface between RsfS and uL14 to RsfS anti-association function in Staphylococcus aureus through in vitro experiments: centrifugation in sucrose gradient profiles and an S. aureus cell-free system assay. The detected critical Y98 amino acid on the RsfS surface might become a new potential target for pharmacological drug development and treatment of S. aureus infections.     

Two Epitope Regions Revealed in the Complex of IL-17A and Anti-IL-17A VHH Domain

Interleukin-17 (IL-17) is a cytokine produced by the Th17 cells. It is involved in chronic inflammation in patients with autoimmune diseases, such as rheumatoid arthritis, systemic lupus erythematosus, multiple sclerosis, and psoriasis. The antibodies targeting IL-17 and/or IL-17R are therapy tools for these diseases. Netakimab is an IL-17A-specific antibody containing a Lama glama V_HH derivative domain and a VL variable domain. We have determined the crystal structure of the IL-17A-specific V_HH domain in complex with IL-17A at 2.85 Å resolution. Certain amino acid residues of the three complementary-determining regions of the V_HH domain form a network of solvent-inaccessible hydrogen bonds with two epitope regions of IL-17A. The β-turn of IL-17A, which forms the so-called epitope-1, appears to be the main region of IL-17A interaction with the antibody. Contacts formed by the IL-17A mobile C-terminal region residues (epitope-2) further stabilize the antibody–antigen complex.     

Isolation and Characterization of Homologically Expressed Methanol Dehydrogenase from Methylorubrum extorquens AM1 for the Development of Bioelectrocatalytical Systems

(Ca²⁺)-dependent pyrroloquinolinequinone (PQQ)-dependent methanol dehydrogenase (MDH) (EC: 1.1.2.7) is one of the key enzymes of primary C1-compound metabolism in methylotrophy. PQQ-MDH is a promising catalyst for electrochemical biosensors and biofuel cells. However, the large-scale use of PQQ-MDH in bioelectrocatalysis is not possible due to the low yield of the native enzyme. Homologously overexpressed MDH was obtained from methylotrophic bacterium Methylorubrum extorquens AM1 by cloning the gene of only one subunit, mxaF. The His-tagged enzyme was easily purified by immobilized metal ion affinity chromatography (36% yield). A multimeric form (α6β6) of recombinant PQQ-MDH possessing enzymatic activity (0.54 U/mg) and high stability was demonstrated for the first time. pH-optimum of the purified protein was about 9–10; the enzyme was activated by ammonium ions. It had the highest affinity toward methanol (K_M = 0.36 mM). The recombinant MDH was used for the fabrication of an amperometric biosensor. Its linear range for methanol concentrations was 0.002–0.1 mM, the detection limit was 0.7 µM. The properties of the invented biosensor are competitive to the analogs, meaning that this enzyme is a promising catalyst for industrial methanol biosensors. The developed simplified technology for PQQ-MDH production opens up new opportunities for the development of bioelectrocatalytic systems.     

黑果枸杞籽油的氧化稳定性研究

以黑果枸杞籽油为研究对象,探究黑果枸杞籽油储藏过程中,水、空气、温度、金属离子、光照、抗氧化剂对其过氧化值(POV)的影响。结果表明:黑果枸杞籽油在避光、密封、低温、含有少量水的条件下储藏,其POV增长慢于对照组;添加不同金属离子的黑果枸杞籽油在(100±1)℃储藏132h,POV从高到低依次为FeCl_3 MnSO_4 K_2SO_4 CuSO_4对照组 NaCl MgCl_2 AlCl_3 CaCl_2ZnCl_2,其中添加了FeCl_3、MnSO_4、K_2SO_4、CuSO_4升高了黑果枸杞籽油的POV,而添加MgCl_2、AlCl_3、NaCl、CaCl_2、ZnCl_2降低了黑果枸杞籽油的POV,但降低效果不明显;加入抗氧化剂的黑果枸杞籽油的POV均低于对照组,抗氧化能力依次为TBHQ+BHA TBHQ+VE TBHQ BHA BHA+VE VE。