Influence of Grain Size on Ferroelastic Toughening and Piezoelectric Behavior of Lead Zirconate Titanate

Lead zirconate titanate specimens, at composition Zr_{48.9+- 1.0}/ Ti_51.1+-1.0 of grain sizes ranging from 0.5 to 15 (μm were prepared by hot pressing. The fracture toughness showed a 40% increase in the fine-grained specimens. Poling produced anisotropy in the fracture toughness. A tensor representation for the fracture toughness, now a function of the crack plane normal and the poling direction, is developed. The maximum and minimum values in the toughness tensor are shown to be related to the unpoled toughness by a simple phenomenological relationship. We also find that the piezoelectric coefficient, d₃₃ , shows a slight increase for the fine-grained specimens, which is in conflict with the general view that smaller-grained materials can sustain vanishingly small values of spontaneous polarization.     

Influence of Distributed Particle Size on the Determination of the Parabolic Rate Constant for Oxidation by the Powder Method

The established analysis for the study of oxidation using powder specimens is based on the assumption of monosized particles. The experiments, however, are conducted on powders with a distributed particle size. Here we present a statistical approach for the calculation of the rate constant for oxidation. The results of the analysis are applied to new data on oxidation studies of dense powders of silicon carbonitride amorphous ceramics. The monosized model requires a wide range of values for the rate constant to fit the short term and the long-term data, leading to considerable ambiguity in the estimate of the parabolic rate constant, k _p, for oxidation. In contrast the statistical model fits over the entire range of data, yielding a much more reliable value for k _p. For example, the monosized approach gave a value in the range 19.7 × 10⁻¹⁸ < k _p < 2.7 × 10⁻¹⁸ m²/s. In contrast, the statistical model yields a specific value of 4.5 × 10⁻¹⁸ m²/s.     

Near infrared light-induced disassembly of polymeric micelles based on methylene blue conjugated polyethylene glycol

Light-sensitive drug delivery systems are considered ideal for applications in the biomedical fields for their ability to release the payload in an on-demand spatiotemporal controlled manner through the manipulation of the light source. Among the broad radiation spectrum, near infrared (NIR) light is considered advantageous compared to UV and visible light, due to its inherently lower photodamage to normal tissues and deeper penetration to lesion areas. In this study, we report a successful synthesis of a polymer capable of undergoing partial degradation upon irradiation with NIR light by conjugating 10-N-carbamoyl linkage methylene blue (MB) moiety, a NIR photocleavable ligand, with polyethylene glycol (PEG). Through effective coupling of MB, a hydrophobic moiety, to the hydrophilic PEG molecule, an amphiphilic polymer was synthesized, as demonstrated by a lowered surface tension (55 mN/m at 0.1% wt/vol). Subsequently, photo-induced reversal of surface activity associated with self-assembled structure disruption, was displayed by surface tension measurements, size distribution analysis, and burst release profile of paclitaxel (PTX) from polymeric micelles upon the exposure to NIR irradiation.     

High performance thyratron driver with low jitter

We report the design and development of insulated gate bipolar junction transistor based high performance driver for operating thyratrons in grounded grid mode. With careful design, the driver meets the specification of trigger output pulse rise time less than 30 ns, jitter less than +/-1 ns, and time delay less than 160 ns. It produces a -600 V pulse of 500 ns duration (full width at half maximum) at repetition rate ranging from 1 Hz to 1.14 kHz. The developed module also facilitates heating and biasing units along with protection circuitry in one complete package.     

Note: Compact high voltage pulse transformer made using a capacitor bank assembled in the shape of primary

The experimental results of an air-core pulse transformer are presented, which is very compact (<10 Kg in weight) and is primed by a capacitor bank that is fabricated in such a way that the capacitor bank with its switch takes the shape of single-turn rectangular shaped primary of the transformer. A high voltage capacitor assembly (pulse-forming-line capacitor, PFL) of 5.1 nF is connected with the secondary of transformer. The transformer output voltage is 160 kV in its second peak appearing in less than 2 μS from the beginning of the capacitor discharge. The primary capacitor bank can be charged up to a maximum of 18 kV, with the voltage delivery of 360 kV in similar capacitive loads.     

A novel microfluidic switch for pH control using Chitosan based hydrogels

We report a novel pH-sensitive hydrogel based micro-valve for metered flow that has applications in a laboratory made “Intelligent valving system”. The hydrogel solution was prepared through Chitosan and poly vinyl alcohol in acetic acid and crystallized using gluteraldehyde as the crosslinking agent in the form of thin wafers and it was found to be very sensitive to pH changes. The pore structure of hydrogel was investigated through Field Emission Scanning Electron Microscopy and thin wafers of the gel were physically placed inside PDMS microchannels. Flow metering in these channels was observed by controlled expansion of the hydrogel plug till complete valving was realized. This valving device was further precisely characterized with micro Particle Image Velocimetry using a solution containing fluorescent polymeric micro beads. The principle advantage of this hydrogel device is the smaller range of pH (varying between pH 3 and 7) over which the valving response is observed.     

Non-Cytokine Protein Profile of the Mesenchymal Stem Cell Secretome That Regulates the Androgen Production Pathway

Polycystic ovary syndrome (PCOS) is the most common endocrine and metabolic disorder in reproductive-aged women, and it typically involves elevated androgen levels. Recently, it has been reported that human bone marrow mesenchymal stem cells (hBM-MSCs) can regulate androgen synthesis pathways. However, the details of the mechanism are still unclear. hBM-MSC-derived secreted factors (the secretome) are promising sources of cell-based therapy as they consist of various types of proteins. It is thus important to know which proteins interact with disease-implicated biomolecules. This work aimed to investigate which secretome components contain the key factor that inhibits testosterone synthesis. In this study, we fractionated hBM-MSC-conditioned media into three fractions based on their molecular weights and found that, of the three fractions, one had the ability to inhibit the androgen-producing genes efficiently. We also analyzed the components of this fraction and established a protein profile of the hBM-MSC secretome, which was shown to inhibit androgen synthesis. Our study describes a set of protein components present in the hBM-MSC secretome that can be used therapeutically to treat PCOS by regulating androgen production for the first time.     

Conjugation of curcumin with PVP capped gold nanoparticles for improving bioavailability

Curcumin, a natural polyphenolic compound, has astounding therapeutic applications but lacks in bioavailability mainly due to its poor solubility in water. Polyvinyl pyrrolidone (PVP) which is a proven drug carrier has been used to facilitate the conjugation of curcumin with gold nanoparticles and to improve the solubility of curcumin in water. In this conjugate diaryl heptanoid chromophore group of curcumin which is a much needed group in biomedical applications remains intact as observed from FTIR and UV–vis spectroscopy analysis. The work shows good promise for such conjugates as therapeutic-cum-imaging materials in biomedical field.     

Viscous Potential Flow Analysis of Kelvin–Helmholtz Instability of a Cylindrical Flow with Heat and Mass Transfer

A linear analysis of Kelvin–Helmholtz instability of a cylindrical interface has been carried out when there is heat and mass transfer across the interface, using viscous potential flow theory. Both fluids are considered as incompressible, viscous, and thermally conducting with different kinematic viscosities. Both axisymmetric as well as asymmetric disturbances are considered. Stability criterion is given by a critical value of relative velocity and stability is discussed theoretically as well as numerically. Various graphs with respect to physical parameters such as wave number, viscosity ratio, heat transfer coefficients, Reynolds number, etc., have been drawn and the effect of various parameters have been described. A comparison with the linear stability analysis of inviscid fluids (Lee [10]) has been made and it is observed that viscosity has a stabilizing effect on the stability of the system. © 2013 Wiley Periodicals, Inc. Heat Trans Asian Res, 43(6): 489–503, 2014; Published online 3 October 2013 in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.21092