Development of solid base catalyst X/Y/MgO/γ-Al2O3 for optimization of preparation of biodiesel from Jatropha curcas L.seed oil

The preparation and regeneration conditions of the identified catalyst X/Y/MgO/γ-Al₂O₃ with high catalytic activity were studied and optimized. The biodiesel was prepared by transesterification of Jatropha curcas seed oil produced in Guizhou with methanol at its reflux temoerature in the presence of X/Y/MgO/γ-Al₂O₃. The pilot plant tests were carried out in a 100 L reaction vessel. Both average yield and fatty acid methyl esters (FAME) content reached more than 96.50% under the optimum reaction conditions of the pilot plant tests designed withan oil/methanol molar ratio of 1: 10, catalyst concentration of 1.00%, and reaction time of 3 h at reflux temperature. In addition, analysis shows that the quality of biodiesel meets the standard EN 14214. __________ Translated from Modern Chemical Industry, 2007, 27(Suppl. 2): 452–455 [译自: 现代化工]     

新型二羟基手性磷酸催化剂的合成

以1,1'-联二萘酚〔(R)-BINOL〕为原料,在n-BuLi的作用下对BINOL的3,3'位上进行修饰,获得(R)-3,3'-双(二苯基羟基甲基)-2,2'-二羟基-1,1'-联二萘(Ⅰc),并通过羟基选择性保护,磷酸化反应,将其转化为具有潜在能力的手性磷酸催化剂(Ⅱa),收率52%。     

Development of solid base catalyst X/Y/MgO/-AlO for optimization of preparation of biodiesel from L.seed oil

The preparation and regeneration conditions of the identified catalyst X/Y/MgO/?-Al₂O₃ with high catalytic activity were studied and optimized. The biodiesel was prepared by transesterification of Jatropha curcas seed oil produced in Guizhou with methanol at its reflux temoerature in the presence of X/Y/MgO/?-Al₂O_{3 .} The pilot plant tests were carried out in a 100 L reaction vessel. Both average yield and fatty acid methyl esters (FAME) content reached more than 96.50% under the optimum reaction conditions of the pilot plant tests designed with an oil/methanol molar ratio of 1 : 10, catalyst concentration of 1.00%, and reaction time of 3 h at reflux temperature. In addition, analysis shows that the quality of biodiesel meets the standard EN 14214.     

IDENTIFYING ALTERNATE OPTIMAL SOLUTIONS TO THE DESIGN APPROXIMATION PROBLEM IN STOCK CUTTING

The design approximation problem is a well known problem in stock cutting, where, in order to facilitate the optimization techniques used in the cutting process, it is required to approximate complex designs by simpler ones. Although there are algorithms available to solve this problem, they all suffer from an undesirable feature that they only produce one optimal solution to the problem, and do not identify the complete set of all optimal solutions. The focus of this paper is to study this hitherto unexplored aspect of the problem: specifically, the case is considered in which both the design and the parent material are convex shapes, and some essential properties of all optimal solutions to the design approximation problem are ascertained. These properties are then used to devise two efficient schemes to identify the set of all optimal solutions to the problem. Finally, the recovery of a desired optimal approximation from the identified sets of optimal solutions, is discussed.