Effect of cellulose acetate/cellulose triacetate ratio on reverse osmosis blend membrane performance

Surface functionalization and modification including the grafting process are effective approaches to improve and enhance the reverse osmosis (RO) membrane performance. This work is aimed to synthesize grafted/crosslinked cellulose acetate (CA)/cellulose triacetate (CTA) blend RO membranes using N-isopropylacrylamide (N-IPAAm) as a monomer and N,N-methylene bisacrylamide (MBAAm) as a crosslinker. The morphology of these membranes was analyzed by scanning electron microscopy and their surface roughness was characterized by atomic force microscopy. The performance of these membranes was evaluated through measuring two major parameters of salt rejection and water flux using RO unit at variable operating pressures. It was noted that the surface average roughness obviously decreased from 148 nm for the pure CA/CTA blend membrane with 2.5% CTA to 110 nm and 87 nm for the grafted N-IPAAm and grafted/crosslinked N-IPAAM/MBAAm/CA/CTA-RO membranes, respectively. Moreover, the contact angle decreased from 51.98° to 47.6° and 43.8° after the grafting and crosslinking process. The salt rejection of the grafted CA/CTA-RO membrane by 0.1% N-IPAAm produced the highest value of 98.12% and the water flux was 3.29 L/m²h at 10 bar.     

Reflectarray research at the communications research centre Canada

It has been a decade since a research program began on reflectarray technology at the Communications Research Centre Canada (CRC). This endeavor has demonstrated the advantages and shortcomings of this technology, the issues that ought to be addressed, and future opportunities. This paper summarizes the outcome of this research in the context of projects that have been carried out, and the resulting insight into reflectarray technology. Design methodology, fabrication process, and measurements results will be briefly discussed for each particular development.     

Code generation for a family of executable modelling notations

We are investigating semantically configurable model-driven engineering (MDE). The goal of this work is a modelling environment that supports flexible, configurable modelling notations, in which specifiers can configure the semantics of notations to suit their needs and yet still have access to the types of analysis tools and code generators normally associated with MDE. In this paper, we describe semantically configurable code generation for a family of behavioural modelling notations. The family includes variants of statecharts, process algebras, Petri Nets, and SDL88. The semantics of this family is defined using template semantics, which is a parameterized structured operational semantics in which parameters represent semantic variation points. A specific notation is derived by instantiating the family’s template semantics with parameter values that specify semantic choices. We have developed a code-generator generator (CGG) that creates a suitable Java code generator for a subset of derivable modelling notations. Our prototype CGG supports 26 semantics parameters, 89 parameter values, and 7 composition operators. As a result, we are able to produce code generators for a sizable family of modelling notations, though at present the performance of our generated code is about an order of magnitude slower than that produced by commercial-grade generators.     

Morphological and mechanical studies of surface treated mica reinforced high density polyethylene

Morphological studies of high density polyethylene (HDPE) reinforced by mica flakes has been investigated. The mica flakes were surface treated by silane and titanate coupling agents. Effects of these treatments on the polymer-mica interface is discussed. It is found that surface treatment, particularly silane treated composites, have better adhesion between the reinforcing agent and the polymer matrix. This effect can only be detected when the mica concentration is higher than 20 weight percent. This interfacial adhesion could not be seen across the surface of the sample but only when the measurements were made parallel to the surface.     

Hydrodesulfurization of model diesel using Pt/Al2O3 catalysts prepared by supercritical deposition

Pt/Al₂O₃ catalysts with Pt loadings ranging from 0.5 to 11 wt.% were synthesized by supercritical carbon dioxide (scCO₂) deposition method. Transmission electron microscopy (TEM) images showed that the synthesized catalysts contained small Pt nanoparticles (1–4 nm in diameter) with a narrow size distribution, no observable agglomeration, and uniformly dispersed on the alumina support. The catalysts were found to be active for hydrodesulfurization of dibenzothiophene (DBT) dissolved in n-hexadecane (n-HD) without sulfiding the metal phase. The reaction proceeded only via the direct hydrogenolysis route in the temperature range 310–400 °C and at atmospheric pressure. The activity increased with increasing the metal loading. Increasing [H₂]₀/[DBT]₀ by either increasing [H₂]₀ or decreasing [DBT]₀, increased the DBT conversion. At a fixed weight hourly space velocity and feed concentration, conversion did not increase with increasing temperature beyond 330 °C. The presence of toluene inhibited the catalyst activity presumably due to competitive adsorption between DBT and toluene. Under the operating conditions, the reaction was far from equilibrium.     

Light weight model for intra mode selection in HEVC

Multimedia Tools and Applications - The High Efficiency Video Coding (HEVC) efficiently reduces the size of the multimedia contents, but at the cost of high computation complexity. In order to make...     

Modeling and Analysis of Temperature Compensation for Multi-temperature Zone Sintering Furnace Temperature Sensing

International Journal of Control, Automation and Systems - The surface temperature of workpieces in a multi-temperature zone sintering furnace is an important parameter to characterize the...     

Synthesis and characterization of eugenol-based silicone modified waterborne polyurethane with excellent properties

A eugenol-based silicone-containing monomer 4,4′-(1,1,3,3-tetramethyldisiloxane-1,3-dipropyl)bis-2-methoxyphenol(EUSi) was synthesized from eugenol and 1,1,3,3-tetramethyldisiloxane via the hydrosilylation reaction. And waterborne polyurethane (WPU) with excellent properties was obtained by using EUSi as a type of diol chain extender. The unique combination of rigidity and flexibility in the chemical structure of EUSi greatly facilitated the mechanical properties, thermal properties, and water resistance of WPU. With only a 3% dosage of EUSi, the maximum tensile strength was increased from 6.2 to 22.4 MPa, while the water absorption was decreased from 31.3% to a surprisingly 7.6%. Our work provides a new convenient strategy for the preparation of organosilicon-modified WPU with improved performance.     

Adaptive infill sampling criterion for multi-fidelity optimization based on Gappy-POD

This paper presents a reformulation of the “Gappy Proper Orthogonal Decomposition” (Gappy-POD) multi-fidelity modeling approach and proposes an enrichment criterion associated with an adaptive infill algorithm. The latter is here applied to the study of the flight domain of the RAE-2822 transonic airfoil at two different levels of accuracy to demonstrate its ability to detect areas in a two-dimensional design space where the surrogate model needs improvement to better drive the optimization process.     

Effect of substrate bias on the properties of plasma deposited organosilicone (pp-HMDSN) thin films

Organosilicone thin films have been deposited by plasma polymerization (pp) in a plasma enhanced chemical vapor deposition (PECVD) system using hexamethyldisilazane (HMDSN:C6H19Si2N) as a monomer precursor, at different biases of the stainless-steel substrate holder. The substrate bias affected film thickness, surface morphology, chemical composition and photoluminescence (PL) emission. For a negatively biased substrate, it is found that the film thickness is the minimum, while the porosity and PL emission are the maximum. For a positively biased substrate, the thickness and the ratio of Si/N are the maximum which correspond to a blue shift of the PL emission in comparison with the case of non-biased grounded substrate. In addition, the characterization of the plasma using a single cylindrical Langmuir probe has been performed to obtain information about both the electron density and the positive ion energy, where it can be concluded that the ion energy plays a major role in determining film thickness.