Disulfide bond assignment in human interleukin-7 by matrix-assisted laser desorption/ionization mass spectroscopy and site-directed cysteine to serine mutational analysis

Interleukin-7 (IL-7) is a proteinaceous biological response modifier that has a bioactive tertiary structure dependent on disulfide bond formation. Disulfide bond assignments in human (h)IL-7 are based upon the results of matrix-assisted laser desorption/ionization (MALDI) mass spectroscopy and Cys to Ser mutational analyses. A gene encoding the hIL-7 was synthesized incorporating Escherichia coli codon usage bias and was used to express biologically active protein as determined by stimulation of precursor B-cell proliferation. MALDI mass spectroscopic analysis of trypsin-digested hIL-7 was performed and compared with the anticipated results of a simulated tryptic digestion. Many of the anticipated hIL-7 tryptic fragments were detected including one with a molecular mass equivalent to the sum of two polypeptides linked through a disulfide bond formed from Cys residues (Cys3 and Cys142). Subsequently, Cys to Ser substitution mutational analyses were performed. A hIL-7 variant with all six Cys substituted with Ser was found to be biologically inactive (EC50 > 1 x 10(-7) M). In contrast, a family of single disulfide bond-forming variants of hIL-7 were constructed by reintroducing Cys pairs (Cys3-Cys142, Cys35-Cys130, and Cys48-Cys93), and each could stimulate cell proliferation with an EC50 of 4 x 10(-9), 2 x 10(-8), and 2 x 10(-9) M, respectively. In single disulfide bond-forming mutants of hIL-7, the ability to stimulate cell proliferation was abolished in the presence of 2 mM dithiothreitol. The results presented strongly suggest that only a single disulfide bond is required for hIL-7 to form a tertiary structure capable of stimulating precursor B-cell proliferation.     

Ultimate behavior of axially loaded RC wall-like columns confined with GFRP

The assessment of the effectiveness of the fiber reinforced polymer (FRP) confinement on rectangular reinforced concrete (RC) columns with high aspect ratio (wall-like) still represents an unresolved issue. The present paper aims at providing more experimental evidence about the behavior of such members confined with both uni-directional and quadri-directional glass FRP laminates. Particular attention is devoted to issues related to the premature failure of confining fibers experimentally observed in wall-like columns. Test results on nine axially loaded columns are herein presented; emphasis is also given to the analysis of FRP strain profiles along the sides of the cross-section. The analysis of test results highlights that glass FRP (GFRP) confinement could determine significant strength and ductility increases; the discussion of failure modes points out that the failure of GFRP confined wall-like columns is controlled by the shape of the cross-section and occurs at transverse strains in the jacket much lower than those ultimate of the fibers. Theoretical–experimental comparisons are performed using some available models for strength prediction of such members.     

Pressure‐Tunable Ambipolar Conduction and Hysteresis in Thin Palladium Diselenide Field Effect Transistors

Few‐layer palladium diselenide (PdSe₂) field effect transistors are studied under external stimuli such as electrical and optical fields, electron irradiation, and gas pressure. The ambipolar conduction and hysteresis are observed in the transfer curves of the as‐exfoliated and unprotected PdSe₂ material. The ambipolar conduction and its hysteretic behavior in the air and pure nitrogen environments are tuned. The prevailing p‐type transport observed at atmospheric pressure is reversibly turned into a dominant n‐type conduction by reducing the pressure, which can simultaneously suppress the hysteresis. The pressure control can be exploited to symmetrize and stabilize the transfer characteristics of the device as required in high‐performance logic circuits. The transistors are affected by trap states with characteristic times in the order of minutes. The channel conductance, dramatically reduced by the electron irradiation during scanning electron microscope imaging, is restored after an annealing of several minutes at room temperature. The work paves the way toward the exploitation of PdSe₂ in electronic devices by providing an experiment‐based and deep understanding of charge transport in PdSe₂ transistors subjected to electrical stress and other external agents.     

Co and Ni supported on CeO2 as selective bimetallic catalyst for dry reforming of methane

Co/CeO₂ (Co 7.5 wt.%), Ni/CeO₂ (Ni 7.5 wt.%) and Co–Ni/CeO₂ (Co 3.75 wt.%, Ni 3.75 wt.%) catalysts were prepared by surfactant assisted co-precipitation method. Samples were characterized by X-Ray diffraction, BET surface areas measurements, temperature programmed reduction and tested for the dry reforming of methane CH₄ + CO₂ → 2CO + 2H₂ in the temperature range 600–800 °C with a CH₄:CO₂:Ar 20:20:60 vol.% feed mixture and a total flow rate of 50 cm³ min⁻¹ (GHSW = 30,000 mL g⁻¹ h⁻¹). The bimetallic Co–Ni/CeO₂ catalyst showed higher CH₄ conversion in comparison with monometallic systems in the whole temperature range, being 50% at 600 °C and 97% at 800 °C. H₂/CO selectivity decreased in the following order: Co–Ni/CeO₂ > Ni/CeO₂ > Co/CeO₂. Carbon deposition on spent catalysts was analyzed by thermal analysis (TG-DTA). After 20 h under stream at 750 °C, cobalt-containing catalysts, Co/CeO₂ and Co–Ni/CeO₂, showed a stable operation in presence of a deposited amorphous carbon of 6 wt.%, whereas Ni/CeO₂ showed an 8% decrease of catalytic activity due to a massive presence of amorphous and graphitic carbon (25 wt.%).     

Non-invasive monitoring of water content and textural changes in clay-rocks using spectral induced polarization: A laboratory investigation

Seven well-characterized clay-rocks have been taken from three test sites to perform spectral induced polarization (SIP) measurements during desiccation of these samples. These test sites include (1) the Tournemire site (IRSN) located in south of France, (2) The Bure test site (ANDRA) located in west of France, and (3) the Super-Sauze earthflow located in south western of France. We dried the samples at ambient temperature followed by heating between 65 °C and 105 °C. The quadrature conductivity, at very low-frequency, was able to discriminate between the loss of free water from the macropores and the loss of water in the micropores associated with textural changes. The calcite and quartz grain size distributions had a significant effect on the low-frequency spectrum. The inversion of our SIP data demonstrated that the generalized Cole–Cole model is an appropriate empirical and practical model for monitoring changes in water content of clay-rocks.     

Nanostructured TiO2-based mixed metal oxides prepared using microemulsions for carbon monoxide detection

Nanostructured powders of Nb-doped TiO₂ (TN) and SnO₂ mixed with Nb-doped TiO₂ in two different atomic ratios—10 to 1 (TSN 101) and 1 to 1 (TSN 11)—were synthesized using the reverse micelle microemulsion of a nonionic surfactant (brine solution/1-hexanol/Triton X-100/cyclohexane). The powders were characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). Thick films were fabricated for gas sensors and characterized by XRD analysis and field emission scanning electron microscopy (FE-SEM). The effects of the film morphology and firing temperature in the range 650–850 °C on CO sensitivity were studied. The best gas response, expressed as the ratio between the resistance in air and the resistance under gas exposure (R _air/R _gas), was measured for TSN 11 at 11 for 1,000 ppm CO exposure. All types of sensors showed good thermal stability. The electrochemical impedance spectroscopy (EIS) measurements were performed in different gas atmospheres (air, O₂, CO and NO₂) to better understand the electrical properties of the nanostructured mixed metal oxides.     

Tampering in RFID: A Survey on Risks and Defenses

RFID is a well-known pervasive technology, which provides promising opportunities for the implementation of new services and for the improvement of traditional ones. However, pervasive environments require strong efforts on all the aspects of information security. Notably, RFID passive tags are exposed to attacks, since strict limitations affect the security techniques for this technology. A critical threat for RFID-based information systems is represented by data tampering, which corresponds to the malicious alteration of data recorded in the tag memory. The aim of this paper is to describe the characteristics and the effects of data tampering in RFID-based information systems, and to survey the approaches proposed by the research community to protect against it. The most important recent studies on privacy and security for RFID-based systems are examined, and the protection given against tampering is evaluated. This paper provides readers with an exhaustive overview on risks and defenses against data tampering, highlighting RFID weak spots and open issues.     

The vulnerability of hydroelectric generation in the Northeast of Brazil: The environmental and business risks for CHESF

The main objective of this study is to identify how global climate change may affect the internal and external variables of enterprises, and how strategic planning could include responses to potential performance threats. A case study was prepared using data from the São Francisco Hydroelectric Company (CHESF), the largest hydroelectric power generator in Brazil's Northeast region. It is essential to understand how the leading energy company in the region is preparing to address these problems involving economic impacts resulting from the environmental effects of climate change. Two prospective methodologies were used to select the variables and construct a SWOT matrix, and their respective scenarios: A Panel of Experts and the Delphi Method. The methodologies used allow for four (4) distinct scenarios to be inferred for CHESF up until 2050: Development, Growth, Survival and Decline. The analyses of these scenarios concluded that CHESF's main risk from climate change is the possible reduction of water flow and reservoir levels, which could threaten energy security throughout the country if certain preventative adaptations to climate change are not implemented.