Evolutionary multiobjective optimization for base station transmitter placement with frequency assignment

We propose a new solution to the problem of positioning base station transmitters of a mobile phone network and assigning frequencies to the transmitters, both in an optimal way. Since an exact solution cannot be expected to run in polynomial time for all interesting versions of this problem (they are all NP-hard), our algorithm follows a heuristic approach based on the evolutionary paradigm. For this evolution to be efficient, i.e., goal-oriented and sufficiently random at the same time, problem-specific knowledge is embedded in the operators. The problem requires both the minimization of the cost and of the channel interference. We examine and compare two standard multiobjective techniques and a new algorithm - the steady-state evolutionary algorithm with Pareto tournaments. One major finding of the empirical investigation is a strong influence of the choice of the multiobjective selection method on the utility of the problem-specific recombination leading to a significant difference in the solution quality.     

Performance enhancement of an induction motor by secondaryimpedance control

The paper demonstrates the use of nonresistive secondary control of an induction motor to improve efficiency, power factor and torque. A mathematical algorithm is presented to predict the control requirements in terms of secondary capacitance. The required secondary capacitance is implemented by a novel electronic switching technique that effectively increases the value of the used capacitor. This overcomes the high-capacitance demand and provides a feasible solution. Experimental verification is presented in the results obtained from a small induction motor drive     

Quantitative microstructural characterisation of Fe–30Ni alloy after martensitic transformations by means of stereological and magnetic methods

In the Fe–30Ni alloy investigated a martensitic transformation can occur both during quenching or plastic deformation. Martensite formed during plastic deformation, depending on the thermo-mechanical treatment applied, exhibits a different morphology from that achieved during quenching and forms the so-called composite-like structure. The morphology and volume fraction of martensite depends both on strain and temperature. In the present studies Fe–30Ni alloy was deformed by monotonic rolling in one path and perpendicular rolling in the temperature range M_D–M_S. The aim of the investigations was a determination of martensite volume fraction depending on the strain and temperature. To examine the influence of strain, the alloy was deformed by rolling in one path or perpendicular rolling at a temperature of − 30 °C, in the strain range of 10–30%. The dependence of temperature was investigated by rolling with 30% strain in a temperature range from − 30 °C to − 80 °C. The variants of thermo-mechanical treatment performed enabled us to achieve different martensite morphologies and volume fractions. Microstructural analysis was performed by means of light microscopy and transmission electron microscopy. The results of quantitative microstructural analysis of martensite and retained austenite volume fractions formed in different thermo-mechanical treatments were compared with those obtained by magnetic measurements. The fraction of deformation-induced martensite determined varied from 2% to 86%. The partial volume fractions V_V^MF of martensite formed in different deformation directions were also determined. It was found that the influence of the temperature on the martensite volume fraction is more pronounced than the influence of strain.     

Human, rhesus macaque, and feline sequences highly similar to mouse mammary tumor virus sequences

Sequences highly similar (>95%) to the mouse mammary tumor virus (MMTV) env gene have been amplified from human DNA samples, including DNA samples from patients with breast cancer (BC) and persons who did not have BC. The sequences from human DNA were distinct from the MMTV sequences used as controls in these PCR reactions, indicating that these results are not simply due to contamination. In addition to both, mouse and human-related sequences were also amplified from some monkey and cat genomic DNA samples. These products were shown to be distinct from, but highly related to, the MMTV env gene, whereas, testing of other sources (lambda phage, snake, cockroach, sea urchin, chicken, or dog) demonstrated no specific amplification. A sequence 90% similar to the MMTV group antigen gene (gag) was amplified from cat DNA. These results indicate that DNA from vertebrate species other than rodents, including some but not all humans, monkeys, and cats, can contain sequences closely related to MMTV.     

Brownian Motion Influence on AFM Exosomes’ Size Measurements

Extracellular vesicles are evaluated by nanoparticle tracking analysis (NTA), providing information on their hydrodynamic diameters, and by atomic force microscopy (AFM) to calculate their geometric diameters. The aim of this study is to explore the influence of Brownian movements in a sample drop and preparation time on imaging-based measurements and to determine the relationship between the geometric and hydrodynamic sizes of the extracellular vesicles measured by the AFM and the NTA, respectively. Exosomes derived from the human prostate cancer cell line PC3 were evaluated by NTA and AFM, and those results were compared with Monte Carlo simulations. The mean size, evaluated by AFM shortly after application on the mica substrate, is less than its real value. It obtains the correct value faster for a thinner sample drop. Fitting the log-normal distribution to the geometric and hydrodynamic diameters leads to the conclusion that the latter could arise from the former by linear scaling by a factor that could be used to characterize the analyzed extracellular vesicles. The size of the vesicles attached to the mica substrate depends on time. The effect of Brownian motion and stretch of the lipid bilayer should be considered in the context of exosome AFM studies.     

Comparative Study on Selected Properties of Modified Polyurethane Foam with Fly Ash

The aim of the article is to compare two types of fly ash (from the fluidized and pulverized coal combustion process) as a filler for rigid polyurethane foam. Pulverized fly ash (PFA) is widely used in building materials, while fluidized fly ash (FFA) is not currently recycled, but landfilled. The produced rigid polyurethane foams were reinforced with 5 and 10% by weight addition of fly ash from two different types of boilers. The foaming process, physical properties, morphologies and thermal degradation were subject to comparative analysis. The research indicated that fly ash intensifies the reactions of foam synthesis, most commonly, polyurethane (PU) foam with an addition of 10% PFA. What is interesting is that both ashes can be used in PU foam technology as they do not cause deterioration of the physical parameters. As shown, the addition of filler affects the morphology and impairs the brittleness. Additionally, the use of fly ash from coal combustion in the technology of polyurethane materials complies with the guidelines of the circular economy stated in the European Union legislation. Partial replacement of petrochemical components with waste filler also reduces the total energy consumption in the production of PU composites.     

Applications of Metabolomics in Calcium Metabolism Disorders in Humans

The pathogenesis of the disorders of calcium metabolism is not fully understood. This review discusses the studies in which metabolomics was applied in this area. Indeed, metabolomics could play an essential role in discovering biomarkers and elucidating pathological mechanisms. Despite the limited bibliography, the present review highlights the potential of metabolomics in identifying the biomarkers of some of the most common endocrine disorders, such as primary hyperparathyroidism (PHPT), secondary hyperparathyroidism (SHPT), calcium deficiency, osteoporosis and vitamin D supplementation. Metabolites related to above-mentioned diseorders were grouped into specific classes and mapped into metabolic pathways. Furthermore, disturbed metabolic pathways can open up new directions for the in-depth exploration of the basic mechanisms of these diseases at the molecular level.     

Congo Red as a Supramolecular Carrier System for Doxorubicin: An Approach to Understanding the Mechanism of Action

The uptake and distribution of doxorubicin in the MCF7 line of breast-cancer cells were monitored by Raman measurements. It was demonstrated that bioavailability of doxorubicin can be significantly enhanced by applying Congo red. To understand the mechanism of doxorubicin delivery by Congo red supramolecular carriers, additional monolayer measurements and molecular dynamics simulations on model membranes were undertaken. Acting as molecular scissors, Congo red particles cut doxorubicin aggregates and incorporated them into small-sized Congo red clusters. The mixed doxorubicin/Congo red clusters were adsorbed to the hydrophilic part of the model membrane. Such behavior promoted transfer through the membrane.