Toward A Mechanistic Understanding of Re-Infiltration in Naturally Fractured Reservoirs with Surfactant-Aided Gravity Drainage Process

Surfactant-aided gravity drainage is an improved oil recovery technique for water-invaded zone in fractured carbonate reservoirs, which are mostly oil-wet or mixed-wet rocks. The re-infiltration mechanism in water-invaded zone has a considerable effect on oil vertical movement in gravity drainage processes. In this work, a mechanistic understanding of re-infiltration in surfactant-aided gravity drainage, in comparison to oil–water gravity drainage is presented using an experimentally and numerically validated model. A column model is constructed from three matrix blocks. These blocks are separated from each other by horizontal fractures. A storage tank is considered on top of the model to store depleted oil from matrix blocks. The stacked-blocks model for re-infiltration is validated and verified to simulate water and chemical flooding using a mesh independency study and experimental flooding data in a composite core experiment. Using this model, several analyses are performed to investigate effects of rock and fluid properties, rock saturation functions, wettability alteration, surfactant adsorption, and capillary continuity on re-infiltration.     

Defensive role ofAllium sulfur compounds for leek mothAcrolepiopsis assectella Z. (Lepidoptera) against generalist predators

It has been shown previously that sulfur volatiles produced byAllium plants affect the behavior of their specialist phytophages and of their specialist entomophages. The action of these compounds in protecting the leek mothAcrolepiopsis assectella against generalist entomophages was studied in comparison to the proposed original defensive role of these compounds against generalist herbivorous insects. Two ants species,Formica selysi andF. fusca, were used as generalist predators. Six behavioral criteria of the predatory behavior of the ants were studied in presence of the last-instar caterpillars (C₅). C₅ reared on artificial diets with or without leek components were tested, as well as C₅ soaked in frass of leek-reared caterpillars or disulfide solutions. In addition, the response of the ants to pure chemicals found in leek was studied using honey solutions with or without sulfur compounds. The sulfur allelochemicals ofAllium plants have a negative action on predatory ants. Interestingly, the nonvolatile precursors of sulfur volatiles ofAllium plants seem to have a protective role for their phytophagous insects against generalist entomophages.     

A case study validation of a knowledge-based approach for the selection of requirements engineering techniques

Requirements engineering (RE) is a critical phase in the software engineering process and plays a vital role in ensuring the overall quality of a software product. Recent research has shown that industry increasingly recognizes the importance of good RE practices and the use of appropriate RE techniques. However, due to the large number of RE techniques, requirements engineers find it challenging to select suitable techniques for a particular project. Unfortunately, technique selection based on personal experience has limitations with regards to the scope, effectiveness and suitability of the RE techniques for the project at hand. In this paper, a Knowledge-based Approach for the Selection of Requirements Engineering Techniques (KASRET) is proposed that helps during RE techniques selection. This approach has three major features. First, a library of requirements techniques was developed which includes detailed knowledge about RE techniques. Second, KASRET integrates advantages of different knowledge representation schemata and reasoning mechanisms. Thus, KASRET provides mechanisms for the management of knowledge about requirements techniques and support for RE process development. Third, as a major decision support mechanism, an objective function evaluates the overall ability and cost of RE techniques, which is helpful for the selection of RE techniques. This paper makes not only a contribution to RE but also to research and application of knowledge management and decision support in process development. A case study using an industrial project shows the support of KASRET for RE techniques selection.

Application of carbon nanostructures toward SO2 and SO3 adsorption: a comparison between pristine graphene and N-doped graphene by DFT calculations

We studied the adsorption of SO_x (x?=?2,3) molecules on the surface of pristine graphene (PG) and N-doped graphene (NDG) by density functional theory (DFT) calculations at the B3LYP/6-31G(d) level. We used Mulliken and NBO charge analysis to calculate the net charge transfer of adsorbed SO_x on pristine and defected graphene systems. Our calculations reveal much higher adsorption energy and higher net charge transfer by using NDG instead of pristine graphene. Furthermore, the density of state (DOS) graphs point to major orbital hybridization between the SO_x and NDG, while there is no evidence of hybridization by using pristine graphene. Based on our results, it is found that SO₂ and SO₃ molecules can be adsorbed on the surface of NDG physically and chemically with adsorption energies (E_ads) of ?27.5 and 65.2?kJ?mol^?1 (19.6 and 51.4?kJ?mol^?1 BSSE), respectively, while low adsorption energies were calculated in the case of using pristine graphene. So we introduced NDG as a sensitive adsorbent/sensor for detection of SO₂ and SO₃.     

Evaluation of a cocktail of three bacteriophages for the biocontrol of Salmonella of wastewater

Salmonella serovars are increasing in importance as significant pathogens of both human and animals. Although water and wastewater are treated to eliminate pathogenic microorganisms, they still play an important role in the transmission of Salmonella spp. In this study, bacteriophages infecting Salmonella spp. were isolated from wastewater and evaluated; for their potential to lyse environmental Salmonella strains in vitro at different MOIs and temperatures; and to control the wastewater bacterial community. Three distinct phages designated sww65, sww275, and sww297; as defined by plaque morphology, electron microscopy and host range; were obtained from wastewater. Challenge tests were performed at 37, and 30 °C with the infection of the Salmonella cultures with individual phage, a mixture of two phages, and cocktail of three phages at MOIs of 10⁰, 10², and 10⁴ PFU/CFU. At 30, and 37 °C, a cocktail of three phages reduced all of the Salmonella cultures tested. These results required a high multiplicity of infection. However, when infected with only one phage or a mixture of two phages at MOIs of 10⁰ or 10 ² PFU/CFU, an emergence of bacterial resistance was observed. The dynamic monitoring of wastewater enterobacterial community was conducted using Enterobacterial Repetitive Intergenic Consensus-PCR (ERIC-PCR). The number of bands decreased gradually with the use of individual phage or phage cocktails. Moreover, the dynamic monitoring of Salmonella community during wastewater treatment was performed using PCR detection of virulence gene invA. The results correlated with the ERIC-PCR fingerprints, and suggested that Salmonella community was affected by the phage treatment. Indeed, in wastewater, bacteriophages are reducing Salmonella and other members of the Enterobacteriaceae. These results indicated that dynamic changes are closely related with the process of treatment. The introduction of wide host range bacteriophages in wastewater can have a potential impact on the dynamics of the microbial communities, manifested by the reduction or the elimination of microbial species.     

Improvement in volume resistivity and morphology of a blend of polyolefin elastomer with linear low-density polyethylene

A silane moisture-cured polyolefin elastomer/linear low-density polyethylene (LLDPE) blend was prepared through a two-step silane-grafting method (Sioplas Process) in an industrial scale twin-screw extruder. The silane-grafted compound was used to make wire and cable coatings. In this work, the effect of some interactive parameters on quality of the products prepared by the above method has been studied, while so far, there have been less experimental investigations. The volume resistivity of cross-linked compound was changed from 2.96 × 10¹⁴ to 7.41 × 10¹⁴ Ω cm with increasing LLDPE component by maximum 10 wt%. Surface morphology of the product was corrected with reduction in benzoyl peroxide (BPO) concentration from 0.2 wt% to 0.13 wt%. BPO at this level acted as an initiator in grafting reaction of vinyl trimethoxysilane. The curing condition and specimen preparation method by injection molding and/or extrusion were factors which influenced the hot-set test results at 200 °C. The results of tensile and elongation studies showed a maximum value of 9 MPa and 397% for the tests, after 6 h curing. With increases in curing time at a specified temperature, the gel content of the cross-linked compound was increased and reached its maximum value. The maximum gel content values were found to be approximately 60%, 80%, and 82% at temperatures of 25, 60, and 85 °C, respectively. The hardness, density, and tear strength of the samples did not vary significantly with the curing temperature.

     

Extended Algorithms for Approximating Variable Order Fractional Derivatives with Applications

This paper proposes accurate and robust algorithms for approximating variable order fractional derivatives of arbitrary order. The proposed schemes are based on finite difference approximations. We compare the performance of algorithms by introducing a new formulation of experimental convergence order. Two initial value problems are considered and solved by means of the proposed methods. Numerical results are provided justifying the usefulness of the proposed methods.     

Roll bonding of AA5052 and polypropylene sheets: Bonding mechanisms,microstructure and mechanical properties

Structural, microstructural and mechanical properties in roll bonding of AA5052 and polypropylene sheets have been evaluated in this study. The surface roughness of the AA5052 sheets, rolling temperature and the surface energy of polymer were selected as the bonding variables. The findings indicated that an increase in the surface energy of polypropylene by grafting maleic anhydride would result in higher bonding strength due to chemical interaction between the AA5052 and the maleic anhydride grafted polypropylene (PP-g-MAH). In fact, this reaction caused the formation of an interphase layer at the polymer side of the interface and the diffusion of aluminum into the PP-g-MAH layer. It was also observed that an increase in the rolling temperature increases bonding strength because the polymer penetrates the AA5052 surface irregularities more easily, the PP-g-MAH molecules move more smoothly toward the AA5052 surface, and finally there are more chemical interactions among the layers. An Increase in the bonding strength through increasing the AA5052 surface roughness was attributed to an increase of the van der Waals force and more interaction surface among the layers along with higher mechanical interlocking in the shear tension test.     

Modeling managerial behavior in real options valuation for project-based environments

Project valuation, as a decision-making tool for initiating investments in projects, should be able to value project flexibilities and incorporate reasonable risk preferences of relevant decision makers. Real options valuation methods are the available approaches for valuing project flexibilities, whereas they have shortcomings in considering managers’ reasonable risk preferences in project decisions. Therefore, researchers have suggested approximating the perspective on risk of real options methods and practitioners in project management. This study proposes a fair real options valuation for project-based environments by a behavioral economic approach, which adopts binomial lattice method, Monte-Carlo simulation, and cumulative prospect theory. The results show that behavioral factors such as ‘risk attitude’ and ‘loss aversion’ should be accepted in project investment decisions while limited to an acceptable amount depending on the project conditions (e.g. uniqueness of decision-making scenarios). This research contributes to the project management domain by enhancing project investment decisions that include project flexibilities.     

Shift catalysts in biomass generated synthesis gas

One of the CHRISGAS project objectives is to study the shift catalysts in biomass-generated synthesis gas. The water gas shift reaction is ruled by equilibrium, and the state of the gas can for a given H₂/CO ratio be shifted by addition/removal of water, CO₂ and/or by a change in the temperature. Stability area in respect to gas composition, sulphur content, pressure and temperature for FeCr shift catalyst has been investigated by thermodynamic equilibrium calculations. The calculations show that carbide formation is favourable in the “Normal water” case without sulphur in the gas. If sulphur is present in the gas, the situation improves due to sulphide formation.