Efficient QoS support in a slotted multihop WDM metro ring

A novel distributed access protocol for a slotted wavelength-division-multiplexing (WDM) metro ring employing all-optical packet switching and supporting quality-of-service (QoS) classes is presented and analyzed. Since we assume that there are more nodes than available wavelengths in the network, we obtain a scalable multihop WDM ring as underlying network architecture. By dividing each channel into several time slots and further applying destination release and slot reuse, data packets can be efficiently transmitted and received in a statistically multiplexed manner. In our architecture, each node is equipped with one tunable transmitter and one fixed-tuned receiver. Furthermore, as we generally consider so-called a posteriori access strategies, different packet selection schemes are proposed and compared. An analytical model based on the semi-Markov process methodology is developed to quantify the performance of one of these schemes. As a key element of the protocol, an efficient QoS support access mechanism is proposed and its performance is evaluated. The new QoS control scheme adopts a frame-based slot reservation strategy including connection setup and termination, which only slightly increases the signaling and node processing overhead. Thus, an efficient hybrid protocol combining connectionless and connection-oriented packet transmissions is proposed     

Colour and COD removal from textile effluent by coagulation and advanced oxidation processes

The aim of this study was to compare the performance of coagulation, Fenton's oxidation (Fe²⁺/H₂O₂) and ozonation for the removal of chemical oxygen demand (COD) and colour from biologically pretreated textile wastewater. FeSO₄ and FeCl₃ were used as coagulants at varying doses and varying colour removal efficiency was measured. For the Fenton process, COD and colour removal efficiencies were found to be 78% and 95% for the Fenton process, and to be 64% and 71% for the Fenton-like process (Fe³⁺/H₂O₂), respectively. Ozonation experiments were conducted at different initial pH values and fixed ozone doses. Ozonation resulted in 43% COD and 97% colour removal whereas these rates increased to 54% and 99% when 5 mg/l hydrogen peroxide was added to the wastewater before ozonation at the same dose. The operating costs of all proposed treatment systems were also evaluated in this study.     

Surface modification of polyester and polyamide fabrics by low frequency plasma polymerization of acrylic acid

In this study, the surface characteristics of polyester and polyamide fabrics were changed by plasma polymerization technique utilizing acrylic acid as precursor. This monomer was used to produce hydrophilic materials with extended absorbency. The hydrophilicity, total wrinkle recovery angle (WRA°) and breaking strength of the fabrics were determined prior and after plasma polymerization treatment. The modification of surfaces was carried out at low pressure (<100 Pa) and low temperature (<50°C) plasma conditions. The effects of exposure time and discharge power parameters were optimized by comparing properties of the fabrics before and after plasma polymerization treatments. It was shown that two sides of polyester fabric samples were treated equally and homogeneously in plasma reactor. For polyester fabrics, the minimum wetting time, 0.5 s, was observed at two plasma processing parameters of 10 W–45 min and 10 W–20 min, where untreated fabric has a wetting time of 6 s. For polyester fabrics, the maximum value was obtained at 60 W–5 min with the wrinkle recovery angle of 306° where the untreated fabric has 290°. The optimum plasma conditions for polyamide fabrics were determined as 30 W–45 min where 2 s wetting time was observed. Wrinkle recovery angle of untreated polyamide fabric was 264°. In this study, after plasma polymerization of acrylic acid, wrinkle recovery angle values were increased by 13%. No significant change was observed in breaking strength of both fabrics after plasma treatment. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2318–2322, 2007     

Episodic memory and metamemory in Parkinson’s disease patients.

This study investigated episodic memory and metamemory for verbs and nouns in patients who have cognitive impairments associated with Parkinson’s disease (PD). PD patients and healthy control participants were asked to recall word pairs and provide feeling-of-knowing (FOK) judgments for the items they were unable to recall. This was followed by a 4-alternative recognition test. PD patients were impaired in both recall and recognition, compared with controls. In terms of metamemory, PD patients were less confident in their ability to recognize the unrecalled items in a future recognition test. Most important, accuracy of PD patients’ FOK judgments was not above chance and was lower than that of control participants. The PD group correctly recognized fewer verbs than nouns, but type of material (verb vs. noun) had no impact on recall or FOK judgments. In addition, contribution of executive functions to FOK accuracy was different in PD patients and controls. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The TeO2-Na2O System: Thermal Behavior,Structural Properties,and Phase Equilibria

Thermal behavior, structural properties, and phase equilibria of the (100−x)TeO₂-xNa₂O system were studied in the 5 ≤ x ≤ 50 mol% composition range. Investigation of glass formation behavior in the binary system was realized, and the glass formation range was determined as 7.5 ≤ x ≤ 40 mol%. Differential thermal analysis (DTA) and Fourier transform infrared (FTIR) spectroscopy techniques were used for thermal and structural characterization of the glasses. Influence of Na₂O content on glass transition temperature (T_g), glass stability (∆T), density (ρ), molar volume (V_M), oxygen molar volume (V_O), and oxygen packing density (OPD) values of sodium tellurite glasses was evaluated considering the structural transformations in the glass network. For the phase equilibria studies, DTA, X-ray diffraction (XRD), and scanning electron microscopy/energy dispersive X-ray (SEM/EDS) techniques were utilized to characterize the heat-treated samples. According to the phase equilibria studies, three eutectic regions were detected in the 0 < x < 50 mol% composition range of the (100−x)TeO₂-xNa₂O system. A new invariant endothermic reaction was detected for the compositions between 40 ≤ x ≤ 45 mol%. Na₂O.8TeO₂ (11.11 mol% Na₂O) compound that was claimed to exist in the binary system in the literature was found to be the metastable δ-TeO₂ phase.     

Methanol tolerant electrocatalysts for the oxygen reduction reaction

Direct methanol fuel cells (DMFCs) represent an interesting alternative in obtaining electricity in a clean and efficient way. Portable power sources are one of the most promising applications of passive DMFCs. One of the requirements in these devices is to use high alcohol concentration, which due to methanol crossover causes a considerable loss of fuel cell efficiency. In order to develop methanol tolerant cathodes with suitable activity, different supported catalysts namely PtCo/C and PtCoRu/C, were prepared either via ethylene glycol reduction (EG) with or without microwave heating assistance (MW) or via the alloy method, the latter followed by a thermal treatment in a reducing atmosphere (N₂/H₂). All cathode-catalysts were tested to determine the role of the components in simultaneously enhancing the oxygen reduction reaction (ORR) and discouraging the methanol oxidation reaction. According to the synthesis methodology, X-ray photoelectron spectra showed that the amount of metal oxides on the surface varies, being higher on the PtCo/C EG and PtCoRu/C EG catalysts. The electrochemical characterization of the catalysts was accomplished in a three electrodes electrochemical cell with a glassy carbon rotating disk electrode covered with a thin catalytic film as working electrode. To study the ORR and the influence of different methanol concentrations, linear sweep voltammetry and cyclic voltammetry were employed. The PtCo/C EG, with an important metal oxide amount on the surface, and the PtCoRu/C MW and EG electrodes, both with RuO₂ on their surfaces, were the most tolerant to methanol presence.     

X-ray investigation of sintered cadmium doped hydroxyapatites

Pure and cadmium (Cd) doped hydroxyapatites (HA, Ca₁₀(PO₄)₆(OH)₂) were synthesized by a precipitation method from aqueous solutions of Ca(NO₃)₂4·H₂O for the former and Cd(NO₃)₂4·H₂O for the latter, by using (NH₄)₂HPO₄ as the phosphate source, while pH was kept in the range of 11–12. The effect of incorporation of Cd²⁺ ions into the structure of HA was investigated after the air sintering at 1100 °C for 1 h. The results indicate that Cd²⁺ addition into HA yields nearly fully densified products with respect to pure stoichiometric HA. The XRD patterns showed that Cd doping increases the crystallinity of HA. The 2, 4.4, and 8.8 mol% Cd doped HAs had calcium oxide (CaO) impurity phase in their lattice. The CaO phase in the HA structure gradually disappeared with increasing Cd amount, and was replaced with cadmium oxide (CdO) in the CdHA doped with 11 mol% Cd. Cd²⁺ ion incorporation decreased the a- and c-axis lattice constants and unit cell volume of HA.     

Plasmid stability in a recombinant S cerevisiae strain secreting a bifunctional fusion protein

The recombinant Saccharomyces cerevisiae strain, YPB‐G, producing and secreting Bacillus subtilis α‐amylase and Aspergillus awamori glucoamylase as a fusion protein yielded efficient utilisation of starch. A segregated population balance model has been used to determine the probability of plasmid loss and plasmid copy number. The kinetics of cell growth and product (fusion protein) formation were based on a genetically structured model. The predictions were compared with the experimental observations obtained for the unstable recombinant S cerevisiae cells in a 1.5 dm^?3 batch bioreactor with 30 g dm³ initial starch under non‐aerated conditions. The main advantage of the present model is that three different genetic classes were defined on the basis of the existence of plasmid and of the expression of the enzymes, ie cells containing plasmids and expressing the gene product, x₁; cells containing plasmids and but not expressing the gene product, x₂; and cells without plasmids, x₃. It is confirmed by this model that the cells without plasmids outgrow and dominate in the fermentation medium (2.27 g dm^?3 vs 0.51 g dm^?3) as more and more glucose becomes available by the degradation of starch. © 2001 Society of Chemical Industry     

Roasting-Related Changes in Oxidative Stability and Antioxidant Capacity of Apricot Kernel Oil

Apricot kernels were roasted for various lengths of time (0–30 min) at 180 °C and changes in the oxidative stability, antioxidant capacity, color, as well as the level of tocopherols and fatty acids of the apricot kernel oil (AKO) were monitored. While the level of tocopherols decreased, the oxidative stability and antioxidant capacity of AKO increased with roasting, probably due to the formation of antioxidative Maillard reaction products (MRPs) during the roasting. Medium roasted samples (15–20 min) were found to be more resistant to oxidative deterioration. The oil from the 30-min roasted sample was more susceptible to oxidation compared to the oil from the 20-min roasted sample in most of the stability tests. Relatively shorter roasting periods (5–10 min) also led to a decrease in oxidative stability in comparison to the unroasted sample. Brownish color and antiradical activity increased with roasting and the highest values were measured in the 30 min roasted sample.