Effects of Nanoparticles on Film Properties of Waterborne Acrylic Emulsions

Waterborne acrylic emulsion was obtained by using methyl methacrylate, ethyl and butyl acrylate monomers. Emulsions containing nanoparticles were prepared by blending the stable dispersions containing SiO₂ or MMT nanoparticles. The films were prepared from emulsions and coating tests were applied. The physical properties of prepared emulsions are better than the commercial emulsions. The addition of the nanoparticles especially SiO₂ have positive effect on the resistance to environmental conditions of emulsions. Waterborne acrylic emulsions containing nanoparticles prepared in this study can be used in the manufacturing of the semi-lustrous emulsion type nano paint with low cost, high performance and environmentally friendly.     

Mechanical and viscoelastic properties of polyethylene-based microfibrillated composites from 100% recycled resources

In this study, recycled polyethylene (rPE) based microfibrillated composites (MFCs) were developed while incorporating recycled poly(ethylene terephthalate) (rPET) and recycled polyamide 6 (rPA) as the reinforcing fibrillar phases at a given weight ratio of 80 wt% (rPE)/20 wt% (rPET or rPA). The blends were first melt processed using a twin-screw extruder. The extrudates were then cold stretched at a drawing ratio of 2.5 to form rPET and rPA fibrillar structures. Next, the pelletized drawn samples were injection molded at the barrel temperatures below the melting temperatures of rPET and rPA. The tensile, three-point bending, impact strength, dynamic thermomechanical, and rheological properties of the fabricated MFCs were analyzed. The effects of injection molding barrel temperature (i.e., 150°C and 190°C) and extrusion melt processing temperature (i.e., 250°C and 275°C) on the generated fibrillar structure and the resultant properties were explored. A strong correlation between the fibrillar morphology and the mechanical properties with the extrusion and injection molding temperatures was observed. Moreover, the ethylene/n-butyl acrylate/glycidyl methacrylate (EnBAGMA) terpolymer and maleic anhydride grafted PE (MAH-g-PE) were, respectively, melt processed with rPE/rPET and rPE/rPA6 blends as compatibilizers. The compatibilizers refined the fibrillar structure and remarkably influenced mechanical properties, specifically the impact strength.     

The properties of equimolar copolycarbonates of bisphenol A with bisphenol S and 1,4-bis(hydroxymethyl)cyclohexane

Ranges of both alternating and random 1:1 copolycarbonates of Bisphenol-A (2,2-bis(4-hydroxyphenyl)propane) and Bisphenol-S (4,4′-dihydroxydiphenyl sulphone) and of Bisphenol-A and 1,4-dimethanoylcyclohexane have been synthesized in order to test the hypothesis that, other things being equal, a more random structured polymer should exhibit superior thermal ageing characteristics. Studies on these materials' mechanical and thermal properties establish that within each pair they are extremely similar and hence the original hypothesis is disproved.     

Benzimidazole-based dendritic nanofiltration membranes

A dendritic-benzimidazole (D-BI) has been prepared using polyphosphoric acid (PPA) as a condensing medium with diaminobenzidine (DAB), 1,3,5-benzene tricarboxylic acid, and isophthalic acid as monomers. The structure of D-BI was ascertained by elemental analysis, FTIR, ¹H NMR, and solid-state ¹³C-NMR. The D-BI was incorporated into polysulphone (PSf) by blending with polyvinylpyrrolidone (PVP K-30) as a macromolecular additive. The membranes were cast by phase inversion technique. The physical properties such as surface morphology and the chemical properties such as contact angle and the performance attributes, such as NOM rejection, salt rejection, and pure water flux were studied. It is imperative that the infusibility of rigid polymeric backbone is overcome by the introduction of polar moieties with no compromise on thermal stability. The membranes displayed substantial increase in thermal stability with D-BI content. The marginal increase in flux has been attributed to the branching and steric effect of D-BI. This is because the introduction of polar group efficiently affords to stabilize the adjacent aromatic rings. The salt rejection shows the order of MgSO₄ ≈ Na₂SO₄ > MgCl₂ > NaCl, which follows that the divalent ions are rejected more than monovalent ions. The antifouling behaviour was also significant as the irreversible fouling (R_Ir 9%), which was found to be minimal for D-BI-incorporated membrane. The blended membranes exhibited good hydrophilicity, antifouling, and fairly good rejection of salts.     

On theory of electric conductivity of low-conducting liquid in the field of injecting electrodes (mobility dependence)

Calculation of the mobility of free electrons at the injection of electrons from high voltage needle electrodes on a liquid surface is conducted. Applicability of the methods of solid state physics is validated. The dependence of the mobility on the electric field intensity ～E ^?1/3 is achieved on account of the dependence of the free electron wave function on the electric field intensity. It is substantiated that the distribution function with respect to the energies of electrons does not depend on the electric field intensity.     

Optical and solar parameters of irradiated lead–alkali–silicate glass

Lead–alkali–silicate glass that is used for a shielding window of hot cells in nuclear technology has been irradiated by a ⁶⁰Co radioisotope source between 0.998 and 35.939 kGray dose levels. Gamma rays can affect glass and change its several optical and solar parameters such as secondary internal heat transfer factor (q_i), direct solar transmittance (τ_e), solar factor (g) and shading coefficient via the absorbed dose. It is aimed to investigate the performance of the glass in terms of the shading coefficient, which is the most important parameter to view clearly inside of the hot cell. Furthermore, a comparative evaluation has been done with respect to the unexposed lead–alkali–silicate glass. Change in the shading coefficient with respect to absorbed dose is extremely important.     

Removal of basic dyes from aqueous solutions by crosslinked‐acrylic acid/acrylamidopropane sulfonic acid hydrogels

In this study, Acrylic acid (AA)/2‐acrylamido‐2‐methlypropane sulfonic acid (AMPS) hydrogels were prepared by free radical polymerization in aqueous solutions of AA, AMPS, and N,N‐methylenebisacrylamide (NMBA) as crosslinker. Potassium persulfate (PPS)/potassium bisulfide (PBS) were used as initiator and accelerator pair. The water absorption capacities and dye adsorption properties of the hydrogels were investigated. Adsorption properties of the hydrogels were evaluated by depending on different adsorption conditions such as different initial dye concentration and contact time. The concentrations of the dyes were determined using UV/Vis Spectrophotometer at wavelength 530 nm for safranine T (ST) and 622 nm for brilliant cresyl blue (BCB). Adsorption kinetic studies showed that pseudo‐first order kinetic model is suitable to explain the adsorption kinetic data of the hydrogels. Langmuir and Freundlich isotherm models were used to describe adsorption data. The result revealed that the adsorption of basic dyes onto hydrogels fit very well both Langmuir and Freundlich isotherms. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Collapse of acrylamide‐based polyampholyte hydrogels in water

The swelling behavior of balanced acrylamide (AAm)‐based polyampholyte hydrogels in water and in aqueous salt (NaCl) solutions was investigated. Equimolar ratio of the ionic comonomers 4‐vinylpyridine (cationic monomer) and acrylic acid (anionic monomer) were used together with the nonionic monomer AAm in the hydrogel preparation. The variations of the hydrogel volume in response to changes in pH were measured. It was found that the hydrogels are in a collapsed state not only at the pH of the isoelectric point pH_IEP but also over a wide range of pH including pH_IEP. The width of the collapsed plateau increased and the hydrogels assumed a more compact state as the ionic group content is increased. The antipolyelectrolyte behavior was observed along the collapsed plateau region, where the gel occupies a larger volume in salt solution. The experimental swelling data were compared with the predictions of the Flory‐Rehner theory of swelling equilibrium including the ideal Donnan equilibria. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009