Bias and temperature dependence of homogeneous hot-electroninjection from silicon into silicon dioxide at low voltages

In this paper, new homogeneous hot-electron injection data at 300 K and 77 K is provided covering applied voltages from well below to well above the Si-SiO₂ barrier height, and a wide range of oxide fields. We found that, in contrast to the MOSFET case, homogeneous injection shows two different regimes for accelerating voltages below and above the barrier height. A simple interpretation of the data is proposed, and supported by Monte Carlo (MC) simulations of the injection experiment. Essentially, the two regimes are the signature of a marked transition between an electron population mostly heated by the electric field, and a tail population created by additional but less efficient energy gain mechanisms, leading to a sharp transition in the carrier distribution function. The details of the bias and temperature dependence of injection are then interpreted as the combined effect of tunneling and carrier distribution. Furthermore, possible implications on MOSFET gate currents are briefly discussed     

Comments on “Is the cause of size effect on structural strength fractal or energetic-statistical?” by Ba?ant & Yavari [Engng Fract Mech 2005;72:1-31]

Aim of this letter to the Editor is at replying to the criticisms raised by Ba?ant and Yavari [Ba?ant ZP, Yavari A. Is the cause of size effect on structural strength fractal or energetic - statistical? Engng Fract Mech 2005;72:1-31] against the fractal approach to the size-scale effects on the mechanical properties of materials and the concept of the Multi-Fractal Scaling Law presented by Carpinteri [Carpinteri A. Scaling laws and renormalization groups for strength and toughness of disordered materials. Int J Solids Struct 1994;31:291-302]. These criticisms will be analysed thoroughly, showing how they also contain some mistakes and misunderstandings. The presented elucidations should redirect the discussion to a more correct scientific debate.     

Creutzfeldt-Jakob disease in a husband and wife

A 53-year-old man died of sporadic Creutzfeldt-Jakob disease (CJD) after a 1.5-year clinical course. Four and a half years later, his then 55-year-old widow died from CJD after a 1-month illness. Both patients had typical clinical and neuropathologic features of the disease, and pathognomonic proteinase-resistant amyloid protein ("prion" protein, or PrP) was present in both brains. Neither patient had a family history of neurologic disease, and molecular genetic analysis of their PrP genes was normal. No medical, surgical, or dietary antecedent of CJD was identified; therefore, we are left with the unanswerable alternatives of human-to-human transmission or the chance occurrence of sporadic CJD in a husband and wife.     

Surgery of inguinal hernia: our experience

The study is based on 848 patients that had surgery for inguinal hernia from January 1990 to May 1996. It compares the results obtained using the traditional plastic, called "direct suture", with the results of plastics with prosthesis. A special attention is given to tension-free techniques carried in local anesthesia, undoubtedly considered advantageous because of the technical simplicity in association with the total absence of postoperative complications and relapses, when correctly executed.     

Detection and classification of highway lanes using vehicle motion trajectories

Intelligent vision-based traffic surveillance systems are assuming an increasingly important role in highway monitoring and road management schemes. This paper describes a low-level object tracking system that produces accurate vehicle motion trajectories that can be further analyzed to detect lane centers and classify lane types. Accompanying techniques for indexing and retrieval of anomalous trajectories are also derived. The predictive trajectory merge-and-split algorithm is used to detect partial or complete occlusions during object motion and incorporates a Kalman filter that is used to perform vehicle tracking. The resulting motion trajectories are modeled using variable low-degree polynomials. A K-means clustering technique on the coefficient space can be used to obtain approximate lane centers. Estimation bias due to vehicle lane changes can be removed using robust estimation techniques based on Random Sample Consensus (RANSAC). Through the use of nonmetric distance functions and a simple directional indicator, highway lanes can be classified into one of the following categories: entry, exit, primary, or secondary. Experimental results are presented to show the real-time application of this approach to multiple views obtained by an uncalibrated pan-tilt-zoom traffic camera monitoring the junction of two busy intersecting highways.     

DTG combustion behaviour of charcoals

In this paper, data are reported for the behaviour of some charcoals during combustion and devolatilization in a thermal analyser.     

Injection efficiency of CHISEL gate currents in short MOS devices:physical mechanisms, device implications, and sensitivity totechnological parameters

This paper analyzes MOSFET gate currents in the so-called channel initiated secondary electron injection regime (CHISEL). A Monte Carlo model of the phenomenon is validated and then extensively used to explore CHISEL scaling laws. Results indicate that, compared to conventional channel hot electron injection (CHE), CHISEL exhibits a weaker dependence on channel length and a larger sensitivity to short channel effects. These results are confirmed experimentally and exhaustively explained with the help of simulations; furthermore, some of their possible detrimental consequences on the programming efficiency of CHISEL based flash cells are analyzed. Finally, the impact of channel doping, oxide thickness, and junction depth on CHISEL efficiency has been explored, and guidelines to maintain high injection efficiency in short devices are derived     

Impact of interface and bulk trapped charges on transistor reliability

Oxide reliability is a key issue and the main topic of several recent works. We study the impact of gate oxide stress on transistor performances following a methodology similar to oxide lifetime characterisation in capacitors. A universal trend for degradation of the threshold voltage and drain saturation current with injected charge is observed and the impact of boron on trapping enhancement has been separated by comparing n-MOS and p-MOS.     

Coal combustion: Correlation between surface area and thermogravimetric analysis data

A series of coals of different rank has been characterized by surface area measurements performed by sorption of both nitrogen and carbon dioxide. While the data obtained with nitrogen do not discriminate among the different coal samples, those based on carbon dioxide sorption do give a significant distinction between the samples. This technique has also been applied to the determination of the surface area of coal samples quenched after stepwise combustion in air atmosphere. It has been possible to establish a useful correlation between the latter data and the burning profile measured by derivative thermogravimetry. The aim of the present study was to gain a better understanding of the coal combustion process on a laboratory scale which could reasonably be extended to combustion plants. The results presented are relevant to some of the multivalent aspects inherent in the coal combustion process and some valuable information has been gained in respect of characterization of solid fuels.     

A scale-invariant cohesive crack model for quasi-brittle materials

The fictitious crack model by Hillerborg is the most widely used model to simulate damage and fracture in concrete structures. Its peculiar capability to capture the evolution of the cracking process is accompanied by its simplicity. However, some aspects of the phenomenon are not considered in the model, for instance the size-dependence of the nominal quantities involved in the cohesive law. This affects the predictive capabilities of the model, when it is used to extrapolate results from small laboratory specimens to full-scale structures.In this paper, a scale-independent cohesive law is put forward, which overcomes these drawbacks and permits to obtain a unique constitutive relationship for softening in concrete. By assuming damage occurring in a fractal band inside the specimen, nominal stress, crack opening displacement and nominal fracture energy become scale dependent. Hence they should be substituted by fractal quantities, which are the true material constants. A mutual relation among their fractal physical dimensions puts a strong restriction to disorder. By varying the scaling exponents of the kinematical quantities, a clear transition from discrete to smeared cracking can be obtained. The fractal cohesive law is eventually applied to some tensile test data, showing perfect agreement between theory and experiments.