A practical assessment of risk-averse approaches in production lot-sizing problems

ABSTRACT

This paper presents an empirical assessment of four state-of-the-art risk-averse approaches to deal with the capacitated lot-sizing problem under stochastic demand. We analyse two mean-risk models based on the semideviation and on the conditional value-at-risk risk measures, and alternate first and second-order stochastic dominance approaches. The extensive computational experiments based on different instances characteristics and on a case-study suggest that CVaR exhibits a good trade-off between risk and performance, followed by the semideviation and first-order stochastic dominance approach. For all approaches, enforcing risk-aversion helps to reduce the cost-standard deviation substantially, which is usually accomplished via increasing production rates. Overall, we can say that very risk-averse decision-makers would be willing to pay an increased price to have a much less risky solution given by CVaR. In less risk-averse settings, though, semideviation and first-order stochastic dominance can be appealing alternatives to provide significantly more stable production planning costs with a marginal increase of the expected costs.     

Synthesis and thermal properties of polyamide 6 (A)-polyimide (B) block copolymers of ABA type

Summary Polyimides (PI) having different molecular weights were prepared by condensation of oxydiphthalic anhydride with 9,9-bis-(4-aminophenyl)fluorene in nitrobenzene solution at 180°C. These polyimides carried two amino chain ends which allowed us to fix polycaprolactam chains (PA6) to obtain PA6-PI-PA6 type copolymers. The elemental analysis and infrared spectroscopic determination gave the proportion of PA6 (or PI) in the copolymers. The studies of thermal properties-DSC and TGA-allowed us to characterize the copolymers.     

Measurement of the coolant flow rate using correlation of temperature fluctuations

The transit time of the coolant, and thus its velocity, has been measured using the temperature fluctuation at the outlet of a reactor core. An impulse response function estimation is introduced, which substitutes the widely used cross-correlation measurement technique. It is shown in theory and practice that the time delay estimation is improved when using the impulse response function instead of the cross-correlation function in parameter estimation. Extremely low velocities (down to 2 cm/sec) have been measured in a natural circulation regime in a research reactor.     

Transmission Fiber Chromatic Dispersion Dependence on Temperature: Implications on 40 Gb/s Performance

In this letter, we will evaluate the performance degradation of a 40 km high‐speed (40 Gb/s) optical system, induced by optical fiber variations of the chromatic dispersion induced by temperature changes. The chromatic dispersion temperature sensitivity will be estimated based on the signal quality parameters.     

Microstructure of Silicon Carbide Whiskers Synthesized by Carbothermal Reduction of Silicon Nitride

The microstructure of silicon carbide whiskers synthesized by carbothermal reduction of silicon nitride has been studied using transmission electron microscopy. All of the whiskers examined are single crystals, and grow in the (111) crystallographic direction. Two different forms of stacking faults and microtwins were observed; in one the planar defects are normal to the whisker growth direction, and the other has the defect planes at an angle of about 70° to the growth axis, while both forms of the defects are on the [111] closed-packed planes. Without the addition of catalyst, droplets containing metallic impurities were not found at the tips of the whiskers synthesized by the present process. A core and outer regions were observed in the single-crystal whiskers, which may be evidence that the whiskers were formed by a two-stage mechanism.     

VeGamen exploring art and history in Venice

To make exploring a locale's heritage a challenging and compelling experience, the Venice Game uses a handheld platform and educational software that leverages video game techniques.     

Peripheral noxious stimulation induces CREM expression in dorsal horn: involvement of glutamate

Thermal washout curves have been proposed as noninvasive tools for analysing lower airway dimensions and pulmonary blood flow, but how upper airway heat transfer affects these washout curves is unclear. The present study was designed to compare extrathoracic and tracheobronchial contributions to thermal washout curves. Respiratory frequency, air ambient temperature, and body core temperature (tc) were varied in six male subjects before and after immersion in cold (1.1 degrees C) water for up to 2 h under three conditions: 1) control: ambient temperature (tamb) = 25 degrees C, rectal temperature change (delta tre) = 0 degrees C; 2) pre-immersion: tamb = 4 degrees C, delta tre = 0 degrees C; and 3) post-immersion: tamb = 25 degrees C, delta tre = -0.7 degrees C. Both peak expiratory nasal (tpn) and oral (tpo) airstream temperatures were measured. Each subject was tested twice. Expiratory tpo was generally higher than tpn in all conditions. Increasing breathing rates lowered tpn and tpo in the control and cold air environments. Orifice temperatures, which are presumed to reflect upper airway blood temperatures, correlated with both tpn and tpo. Lowering tc had no effect on washout curves during quiet breathing and affected only tpn during rapid breathing. The results suggest that while tracheobronchial conditions may contribute to thermal washout curves, extrathoracic conditions predominate. Strong correlations between orifice temperatures, peak expiratory nasal temperatures and peak expiratory oral temperature demonstrate the dominant role of upper airway heat exchange in determining thermal washout curves.     

MMP1 and MMP11 Expression in Peripheral Blood Mononuclear Cells upon Their Interaction with Breast Cancer Cells and Fibroblasts

Tumor-infiltrating immune cells phenotype is associated with tumor progression. However, little is known about the phenotype of the peripheral blood mononuclear cells (PBMC) from breast cancer patients. We investigated MMP1 and MMP11 expression in PBMC from breast cancer patients and we analyzed gene expression changes upon their interaction with cancer cells and cancer-associated fibroblasts (CAF). We measured the impact of PBMC on proinflammatory gene expression in breast cancer cells, normal fibroblast (NF), and CAF and the impact on proliferation and invasiveness capacity of breast cancer cells. Gene expression of MMP1 and MMP11 in PBMC from breast cancer patients (n = 54) and control (n = 28); expression of IL1A, IL6, IL17, IFNβ, and NFĸB in breast cancer cell lines (MCF-7 and MDA-MB-231); and, additionally, IL10 and MMP11 in CAF and NF were analyzed by qRT-PCR before and after co-culture. Our results show the existence of a subpopulation of breast cancer patients (25.9%) with very high levels of MMP11 gene expression in PBMC. Also, gene expression of MMP1 and MMP11 increases in PBMC after co-culture with breast cancer cell lines, NF or CAF. PBMC from healthy or breast cancer patients induce an increased proliferation rate on MCF-7 and an increased invasiveness capacity of MDA-MB-231. Finally, we show a differential expression profile of inflammatory genes in NF and CAF when co-cultured with control or breast cancer PBMC. We have observed that MMPs’ expression in PBMC is regulated by the microenvironment, while the expression of inflammatory genes in NF or CAF is differentially regulated by PBMC. These findings confirm the importance of the crosstalk between stromal cells and suggest that PBMC would play a role in promoting aggressive tumor behavior.     

oDect: an RFID‐based object detection API to support applications development on mobile devices

The RFID technology is becoming ever more popular in the development of ubiquitous computing applications. A full exploitation of the RFID potential requires the study and implementation of human–computer interaction (HCI) modalities to be able to support wide usability by the target audience. This implies the need for programming methodologies specifically dedicated to support the easy and efficient prototyping of applications to have feedback from early tests with users. On the basis of our field‐working experience, we have designed oDect, a high‐level language and platform‐independent application programming interface (API), ad hoc designed to meet the needs of typical applications for mobile devices (smart phones and PDAs). oDect aims at allowing application developers to create their prototypes focusing on the needs of the final users, without having to care about the low‐level software that interacts with the RFID hardware. Further, in an end‐user developing (EUD) approach, oDect provides specific support for the application end‐user herself to cope with typical problems of RFID applications in detecting objects. We describe in detail the features of the API and discuss the findings of a test with four programmers, where we analyse and evaluate the use of the API in four sample applications. We also present results of an end‐user test, which investigated strengths and weaknesses of the territorial agenda (TA) concept. The TA is an RFID‐based citizen guide that aids—through time‐ and location‐based reminders—users in their daily activities in a city. The TA directly exploits EUD features of oDect, in particular concerning the possibility of linking detected objects with custom actions. Copyright © 2008 John Wiley & Sons, Ltd.     

Effect of matrix liquid phase on interphase formation in SiC fibre-reinforced Si2N2O-Al2O3-CaO composites

Matrix compositions based on Si₂N₂O, with Al₂O₃ and CaO additions, were used to hot press Nicalon SiC fibre-reinforced composites at 1600 °C. With both CaO and Al₂O₃ additions, eutectic melting formed an appreciable volume of liquid phase during hot pressing, which remained as a stable glassy phase in the cooled composites. This liquid phase fostered formation of 240 nm thick carbon-rich interphases between the fibres and the matrix. These interphases showed relatively low interfacial shear strength and resulted in composites which showed non-catastrophic, notch-independent fracture. Matrices using either Al₂O₃ or CaO did not form adequate liquid phase to form coarse interphases, and fracture was catastrophic in nature. Post-heat treatment of the composites at 1000 °C showed peripheral oxidation (removal of the carbon content of the interphase) indicating limited protection afforded when glassy phase was present in the matrix. Controlled cooling in the hot press did not cause the liquid regions to devitrify.