mRNA for cardiac calcium channel is expressed during development of skeletal muscle

During the early development of skeletal muscle, cardiac isotypes of several contractile proteins are known to be transiently expressed. We report here that skeletal muscle developing in vivo, as well as primary cultures derived from skeletal muscle, express mRNA encoding the cardiac dihydropyridine-sensitive calcium channel. The mRNA is detectable at high concentration at the earliest stage tested in vivo and diminishes rapidly in concentration as myofibers mature. The concentration of the cardiac calcium channel mRNA also diminishes during the in vivo development of skeletal muscle in a genetically paralyzed mouse (mdg), indicating that muscle contractile activity is not necessary for the down-regulation. In contrast, mRNA for the skeletal muscle-specific calcium channel accumulates gradually in developing skeletal muscle. A similar temporal pattern of expression is also seen in primary cultures of skeletal myotubes. These results raise the question of whether the cardiac calcium channel may be functionally important during the early development of skeletal myofibers.     

Large eddy simulation of free-shear flows using an algebraic model

Large eddy simulation of the free-shear flows has been performed using an algebraic subgrid stress model. The test cases considered are the temporal planar jet and mixing layer. The results are compared with that of the Smagorinsky, dynamic Smagorinsky, mixed models and the DNS data. For the mean flow quantities none of the models perform exceptionally better over the others. However, both the algebraic and mixed models predict better statistics for the turbulent quantities than the linear models. The results also demonstrate the capability of the algebraic model in depicting backscatter of energy explicitly, which is consistent in both the cases considered.     

Countercurrent water-heating system with a heat exchanger in a solar energy collector loop

The counter current heat exchanger theory with periodic inlet temperatures has been applied to analyze the thermal performance of a water heating system. The theoretical results obtained are in agreement with the experimental data reported in the literature.     

Kinetics of hydroformylation of 1-decene using homogeneous HRh(CO)(PPh3)3 catalyst: a molecular level approach

The kinetics of hydroformylation of 1-decene using homogenous HRh(CO)(PPh₃)₃ catalyst has been reported in the temperature range of 50–70 °C. The effect of catalyst,P _{H 2},P _CO, and 1-decene concentration on the rate of hydroformylation has been studied. Based on the analysis of initial rate data, a rate equation has been proposed and kinetic parameters evaluated. The activation energy was found to be 11.76 kcal/mol. A molecular level approach to kinetic modelling has also been illustrated. The rate equation derived assuming oxidative addition of H₂ as a rate determining step, has been found to represent the data satisfactorily. The rate parameters for the mechanistic model have been evaluated for the data at 60 °C.NCL Communication No. 5735.     

Prediction of burning rate of coal in fluidized-bed combustion

A theory has been proposed to evaluate the burning rate of a single carbon particle in a continuously operated coal-fired fluidized bed. Experimental verification was carried out in a laboratory scale 200 mm × 200 mm combustor. The burning rate increases with the increase of the fluidization velocity and the size of the bed material. The predicted data on burning rate agree fairly well with the experimental values. The gas concentration in the bed and freeboard has also been measured and it is seen that the consumption of oxygen mostly takes place in the bed.     

Novel Gas-Liquid-Solid Reactors

Multiphase reactors involving gas, liquid, and solid phases have several important applications in the chemical industry, particularly in catalytic processes. Some of the well-known examples are: hydrogenation and oxidation of organic compounds, hydro-processing coal-derived and petroleum oils, Fischer-Tropsch synthesis, and methanation reactions. Due to the presence of three phases, the problem of reactor design is often important to achieve effective mass and heat transfer as well as a mixing pattern favorable to the particular process. The reactors are mainly of two types: (a) solid catalyst is suspended either by mechanical agitation or gas-induced agitation and (b) solid catalyst is in a fixed bed with concurrent or countercurrent feed of gas and liquid re-actants. The reactor types conventionally used in industry are: (a) mechanically agitated or bubble column slurry reactors and (b) trickle-bed or packed-bed bubble reactor. The various design and modeling aspects of these reactors have been reviewed by Satterfield [1], Chaudhari and Ramachandran [2], Shah [3,4], Ramachandran and Chaudhari [5], Shah et al. [6], and Herskowitz and Smith [7]. In several industrial processes these reactor designs are modified to achieve a certain specific objective, such as better heat or mass transfer, higher catalyst efficiency, better reactor performance and selectivity, etc. Similarly, specially designed reactors are often used for laboratory kinetic studies or to understand a certain phenomenon. Thus, novel multiphase reactors are becoming important from both academic and industrial viewpoints. Some of the recently introduced novel gas-liquid-solid reactor types are: (a) loop recycle slurry reactors, (b) basket-type reactors, (c) ebullated-bed reactors, (d) internal or external recycle reactors, (e) multistage slurry or packed-bed reactors, (f) column reactors with sieve trays or multiple agitators, (g) gas-induced agitated reactors, and (h) horizontal-packed-bed reactors. are being used in several new commercial processes, and various design aspects, such as hydrodynamics and mass and heat transfer, have been the subject of investigations in the last few years. However, no attempt to review the scattered information on these novel gas-liquid-solid reactors has been made. Therefore, the main objective of this paper is to review important developments in novel gas-liquid-solid reactors. For each type of reactor, advantages, disadvantages, and applications are discussed. Further, the status of information on hydrodynamics and mass transfer parameters and scale-up considerations is reviewed. These novel reactor designs are being used in several new commercial processes, and various design aspects, such as hydrodynamics and mass and heat transfer, have been the subject of investigations in the last few years. However, no attempt to review the scattered information on these novel gas-liquid-solid reactors has been made. Therefore, the main objective of this paper is to review important developments in novel gas-liquid-solid reactors. For each type of reactor, advantages, disadvantages, and applications are discussed. Further, the status of information on hydrodynamics and mass transfer parameters and scale-up considerations is reviewed.     

Language Structure Using Fuzzy Similarity

Learning of (context-free) grammar rules that are based on alignment between texts of a given collection of sentences has attracted the attention of many researchers. We define and study the alignment profile and formulate fuzzy similarity of alignment profiles for a given collection of sentences. Using the fuzzy-similarity-based profile alignment, we give a methodology to formulate stochastic context-free grammar (CFG) rules. We introduce profile-alignment-based dynamic sentence similarity threshold to formulate the rules of stochastic CFG. The proposed methodology is tested using Child Language Data Exchange System (CHILDES) dataset of sentences. The benefits of our approach are experimentally demonstrated. Since our approach does not make use of any domain knowledge, it is expected to be useful in wide variety of applications requiring model construction.     

1.55μm SiGe 2×3光开关

利用多模干涉效应和自由载流子等离子体色散效应设计和模拟了基于1.55μm波长的2×3 SiGe光开关.该光开关由两个单模输入端口、一个多模干涉区和三个单模输出端口构成.在多模干涉区,设有两个折射率调制区,可以利用来把从两个输入端口输入的光信号分别从三个输出端口输出.束传播法分析结果表明,该光开关的传输损耗小于1.43dB,串扰在-18～-32.8dB之间.     

Surface modification of AFM silicon probes for adhesion and wear reduction

Tip wear of silicon probes used for an atomic force microscope (AFM) is a critical issue. Wear can result in an increase of tip radius and adhesion between tip and sample, thus reducing the image resolution and introducing artifacts. In order to reduce adhesion, friction, and wear so as to reduce tip related artifacts, liquid lubricant (Z-TETRAOL), self-assembled monolayers (pentafluorophenyltriethoxysilane (PFPTES)), and fluorocarbon polymer (Fluorinert™) were applied on the silicon probe. A comprehensive investigation of adhesion, friction, and wear of the uncoated/coated tips in both ambient air and various humidity levels as well as the influence of the coatings on the image resolution was performed. Experiments showed that the coatings reduced the adhesion, friction, and wear of the silicon tip, improved the initial image resolution, and exhibited less deterioration as compared to that of uncoated tip in the long-term test.