Current Understandings on Magnesium Deficiency and Future Outlooks for Sustainable Agriculture

The productivity of agricultural produce is fairly dependent on the availability of nutrients and efficient use. Magnesium (Mg²⁺) is an essential macronutrient of living cells and is the second most prevalent free divalent cation in plants. Mg²⁺ plays a role in several physiological processes that support plant growth and development. However, it has been largely forgotten in fertilization management strategies to increase crop production, which leads to severe reductions in plant growth and yield. In this review, we discuss how the Mg²⁺ shortage induces several responses in plants at different levels: morphological, physiological, biochemical and molecular. Additionally, the Mg²⁺ uptake and transport mechanisms in different cellular organelles and the role of Mg²⁺ transporters in regulating Mg²⁺ homeostasis are also discussed. Overall, in this review, we critically summarize the available information about the responses of Mg deficiency on plant growth and development, which would facilitate plant scientists to create Mg²⁺-deficiency-resilient crops through agronomic and genetic biofortification.     

Computational-Driven Epitope Verification and Affinity Maturation of TLR4-Targeting Antibodies

Toll-like receptor (TLR) signaling plays a critical role in the induction and progression of autoimmune diseases such as rheumatoid arthritis, systemic lupus erythematous, experimental autoimmune encephalitis, type 1 diabetes mellitus and neurodegenerative diseases. Deciphering antigen recognition by antibodies provides insights and defines the mechanism of action into the progression of immune responses. Multiple strategies, including phage display and hybridoma technologies, have been used to enhance the affinity of antibodies for their respective epitopes. Here, we investigate the TLR4 antibody-binding epitope by computational-driven approach. We demonstrate that three important residues, i.e., Y328, N329, and K349 of TLR4 antibody binding epitope identified upon in silico mutagenesis, affect not only the interaction and binding affinity of antibody but also influence the structural integrity of TLR4. Furthermore, we predict a novel epitope at the TLR4-MD2 interface which can be targeted and explored for therapeutic antibodies and small molecules. This technique provides an in-depth insight into antibody–antigen interactions at the resolution and will be beneficial for the development of new monoclonal antibodies. Computational techniques, if coupled with experimental methods, will shorten the duration of rational design and development of antibody therapeutics.     

Thermoelectric properties of SbNCa3 and BiNCa3 for thermoelectric devices and alternative energy applications

Thermoelectric properties of two antiperovskites SbNCa₃ and BiNCa₃ are calculated using first principles calculations. High values of Seebeck coefficients are observed for these materials. Electrical and thermal conductivities are also calculated. Increase in thermal conductivity and decrease in electrical conductivity are found with increasing temperature. The maximum values of thermal conductivity are 92×10¹⁴  W/m K s and 88×10¹⁴  W/m K s for SbNCa₃ and BiNCa₃ respectively at a temperature of 900 K. The peak values of 5×10²⁰/Ω m s and 5.2×10²⁰/Ω m s are achieved for n-type SbNCa₃ and BiNCa₃ respectively at a temperature of 300 K. Figure of merit is achieved for these materials at room temperature which shows that these materials can be useful for thermoelectric devices and alternative energy sources.     

Adsorption of Cr(III), Ni(II), Zn(II), Co(II) ions onto phenolated wood resin

In this study, phenolated wood resin was used an adsorbent for the removal of Cr(III), Ni(II), Zn(II), Co(II) ions by adsorption from aqueous solution. The adsorption of metal ions from solution was carried at different contact times, concentrations and pHs at room temperature (25°C). For individual metal ion, the amount of metal ions adsorbed per unit weight of phenolated wood resin at equilibrium time increased with increasing concentration and pH. Also, when the amounts of metal ions adsorbed are compared to each other, it was seen that this increase was order of Cr(III) > Ni(II) > Zn(II) > Co(II). This increase was order of Cr(III) > Ni(II) > Co(II) > Zn(II) for commercial phenol–formaldehyde resin. Kinetic studies showed that the adsorption process obeyed the intraparticle diffusion model. It was also determined that adsorption isotherm followed Langmuir and Freundlich models. Adsorption isotherm obtained for commercial phenol–formaldehyde resin was consistent with Freundlich model well. Adsorption capacities from Langmuir isotherm for commercial phenol–formaldehyde resin were higher than those of phenolated wood resin, in the case of individual metal ions. Original adsorption isotherm demonstrated the monolayer coverage of the surface of phenolated wood resin. Adsorption kinetic followed the intraparticle diffusion model. The positive values of ΔG° determined using the equilibrium constants showed that the adsorption was not of spontaneous nature. It was seen that values of distribution coefficient (K_D) decreasing with metal ion concentration in solution at equilibrium (C_e) indicated that the occupation of active surface sites of adsorbent increased with metal ions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2838–2846, 2006     

Chemical,thermal, and mechanical properties and ultraviolet transmittance of novel nano-hydroxyapatite/polyethylene terephthalate milk bottles

Polyethylene terephthalate (PET)/nano-hydroxyapatite (nHAp) composite granules were obtained using twin-screw extruder. Preforms were prepared by injection molding and then PET/nHAp bottles were produced by blow molding. For PET bottles with nHAp, the migration amounts of carboxylic acid (COOH), acetaldehyde (AA), diethylene glycol (DEG), and isophthalic acid (IPA); glass transition temperature (T_g); melting temperature (T_m); and the maximum crystallization temperature (T_cry) were measured. The load-carrying capacity, burst strength, stress cracking, and regional material distribution tests were carried out on the bottles. X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and ultraviolet transmittance analyses were conducted to explain the changes in mechanical, chemical, physical properties, and light transmission of bottles. It was found out that the COOH amount increased and the AA content decreased with increasing nHAp amount. On the other hand, no change was observed in the amounts of DEG and IPA. Although the mechanical properties such as load-carrying capacity and burst strength of the bottles have improved, it has been determined that the standard environmental stress crack resistance test procedure cannot be applied to such a composite. Experimental findings indicate that nHAp disrupts the chemical structure of PET and it isolates harmful chemicals such as AA by forming intermolecular bonds. Moreover, with the addition of up to 0.8% nHAp, PET bottles block the light transmission approximately 80% within 400–700 nm wave length zone. The study demonstrates that the PET/nHAp composite bottles can be used in the food industry, particularly in the packaging of milk and milk products which are vulnerable to light exposure.     

Siting park-and-ride facilities using a multi-objective spatial optimization model

Park-and-ride services are an important component of many public transportation systems in the United States. Locating park-and-ride facilities is an essential step when planning for these services. In this research we focus on three major siting/modeling concerns that need to be addressed when siting park-and-ride facilities: covering as much potential demand as possible, locating park-and-ride facilities as close as possible to major roadways, and siting such facilities in the context of an existing system. Unfortunately, existing models do not enable each of these concerns to be simultaneously addressed. This paper presents a multi-objective spatial optimization model for integrating these considerations. This model is applied for siting park-and-ride facilities in Columbus, Ohio. Application results show the usefulness of the developed model in supporting transit planning in an urban region.     

Hardware/software co-design of a real-time kernel based tracking system

The probabilistic visual tracking methods using color histograms have been proven to be robust to target model variations and background illumination changes as shown by the recent research. However, the required computational cost is high due to intensive image data processing. The embedded solution of such algorithms become challenging due to high computational power demand and algorithm complexity. This paper presents a hardware/software co-design architecture for implementation of the well-known kernel based mean shift tracking algorithm. The design uses color histogram of the target as tracking feature. The target is searched in the consecutive images by maximizing the statistical match of the color distributions. The target localization is based on gradient based iterative search instead of exhaustive search which makes the system capable of achieving frame rate up to hundreds of frames per second while tracking multiple targets. The design, which is fully standalone, is implemented on a low-cost medium-size field programmable gate array (FPGA) device. The hardware cost of the design is compared with some other tracking systems. The performance of the system in terms of speed is evaluated and compared with the software based implementation. It is expected that the proposed solution will find its utility in applications like embedded automatic video surveillance systems.     

Dynamic Compensation for Control of a Rotary wing UAV Using Positive Position Feedback

This paper presents a novel compensation method for the coupled fuselage-rotor mode of a Rotary wing Unmanned Aerial Vehicle (RUAV). The presence of stabilizer bar limits the performance of attitude control of an RUAV. In this paper, a Positive Position Feedback (PPF) is introduced to increase the stability margins and allow higher control bandwidth. The identified model is used to design a PPF controller to mitigate the presence of stabilizer bar. Parameters for the linear RUAV model are obtained by performing linear system identification about a few selected points. This identification process gives complete RUAV dynamics and is suitable for designing a Stability Augmentation System (SAS) of an RUAV. The identified parameters of an RUAV model are verified using experimental flight data and can be used to obtain the nonlinear model of an RUAV. The performance of the proposed algorithm is tested using a high-fidelity RUAV simulation model, which is validated through experimental flight data. The closed-loop response of the rotorcraft indicates that the desired attitude performance is achieved while ensuring that the coupled fuselage-rotor mode is effectively compensated without penalizing the phase response.     

Multi-objective rule mining using a chaotic particle swarm optimization algorithm

In this paper, classification rule mining which is one of the most studied tasks in data mining community has been modeled as a multi-objective optimization problem with predictive accuracy and comprehensibility objectives. A multi-objective chaotic particle swarm optimization (PSO) method has been introduced as a search strategy to mine classification rules within datasets. The used extension to PSO uses similarity measure for neighborhood and far-neighborhood search to store the global best particles found in multi-objective manner. For the bi-objective problem of rule mining of high accuracy/comprehensibility, the multi-objective approach is intended to allow the PSO algorithm to return an approximation to the upper accuracy/comprehensibility border, containing solutions that are spread across the border. The experimental results show the efficiency of the algorithm.