Controlling thickness to tune performance of high-mobility transparent conducting films deposited from Ga-doped ZnO ceramic target

Structure modification has been found to tune significantly the transparent-conducting performance, especially mobility and conductivity of hydrogenated Ga-doped ZnO (HGZO) films. The strong correlation between film thickness and mobility of the films is revealed. The mobility increases quickly with increasing the thickness from 350 to 900 nm, and then tends to be saturated at further thicknesses. A higher mobility than 50 cm²/Vs can be achieved, which is an extra-high value for polycrystalline ZnO films deposited by using the sputtering technique. The thickness-dependent mobility originates from scatterings on grain boundaries and dislocation-induced defects controlled by thin-film growth. Based on the Volmer-Weber model, an expansion model is built up to describe the thickness-dependent crystal growth of the HGZO films, especially at the thick films. As a result, the 800 nm-thick HGZO film obtains the highest performance with high mobility of 51.5 cm²/Vs, low resistivity of 5.3 × 10^?4 Ωcm, and good transmittance of 83.3 %.     

A Multiagent System for the Reliable Execution of Automatically Composed Ad-hoc Processes

This article presents an architecture to automatically create ad-hoc processes for complex value-added services and to execute them in a reliable way. The uniqueness of ad-hoc processes is to support users not only in standardized situations like traditional workflows do, but also in unique non-recurring situations. Based on user requirements, a service composition engine generates such ad-hoc processes, which integrate individual services in order to provide the desired functionality. Our infrastructure executes ad-hoc processes by transactional agents in a peer-to-peer style. The process execution is thereby performed under transactional guarantees. Moreover, the service composition engine is used to re-plan in the case of execution failures. The work presented in this article was supported by the Swiss National Science Foundation as part of the project MAGIC (FNRS-68155), as well as by the Swiss National Funding Agency OFES as part of the European projects KnowledgeWeb (FP6-507482) and DIP (FP6-507483). Authors in alphabetic order     

Use of sky brightness measurements from ground for remote sensing of particulate polydispersions

The software code SKYEAD.pack for retrieval of aerosol size distribution and optical thickness from data of direct and diffuse solar radiation is described; measurements are carried out with sky radiometers in the wavelength range 0.369-1.048 μm. The treatment of the radiative transfer problem concerning the optical quantities is mainly based on the IMS (improved multiple and single scattering) method, which uses the delta-M approximation for the truncation of the aerosol phase function and corrects the solution for the first- and second-order scattering. Both linear and nonlinear inversion methods can be used for retrieving the size distribution. Improved calibration methods for both direct and diffuse radiation, the data-analysis procedure, the results from the proposed code, and several connected problems are discussed. The results can be summarized as follows: (a) the SKYRAD.pack code can retrieve the columnar aerosol features with accuracy and efficiency in several environmental situations, provided the input parameters are correctly given; (b) when data of both direct and diffuse solar radiation are used, the detectable radius interval for aerosol particles is approximately from 0.03 to 10 μm; (c) besides the retrieval of the aerosol features, the data-analysis procedure also permits the determination of average values for three input parameters (real and imaginary aerosol refractive index, ground albedo) from the optical data; (d) absolute calibrations for the sky radiometer are not needed, and calibrations for direct and diffuse radiation can be carried out with field data; (e) the nonlinear inversion gives satisfactory results in a larger radius interval, without the unrealistic humps that occur with the linear inversion, but the results strongly depend on the first-guess spectrum; (f) aerosol features retrieved from simulated data showed a better agreement with the given data for the linear inversion than for the nonlinear inversion.     

New Results on Reachable Sets Bounding for Switched Neural Networks Systems with Discrete,Distributed Delays and Bounded Disturbances

Neural Processing Letters - In this paper, problem of reachable sets bounding is considered for switched neural networks systems with mixed time-varying delays and bounded disturbances. By using...     

Determination of viability of Aeromonas hydrophila in increasing concentrations of sodium chloride at different temperatures by flow cytometry and plate count technique

Aeromonads in waters and foods can represent a risk to human health. Factors such as sodium chloride concentration and temperature can affect growth and viability of several food and water-borne pathogens. The behaviour of an Aeromonas hydrophila strain in the presence of 1.7%, 3.4% and 6% NaCl concentrations at 24 degrees C and 4 degrees C was studied over a 188 day period. Viability and membrane potential were assessed by flow cytometry; growth was evaluated by plate count technique. Flow cytometry evidenced that A. hydrophila retained viability over the period although varying according to temperature and salt concentrations. Colony Forming Units were generally lower in number than viable cells especially in the presence of 6% NaCl, indicating the occurrence of stressed cells which maintain metabolic activity yet are not able to grow on agar plates. In conclusion, A. hydrophila showed a long-term halotolerance even at elevated (6%) NaCl concentrations and a lesser sensitivity to salt at low temperature; therefore, low temperature and salt, which are two important factors limiting bacterial growth, do not assure safety in the case of high initial contamination. Finally, cytometry appears a valid tool for the rapid detection of the viability of pathogenic bacteria in food and environmental matrices to control and prevent health risks.     

Effects of Added Phosphates on Lipid Stability During Salt Curing and Rehydration of Cod (Gadus morhua)

Effects of added phosphates on retardation of lipid oxidation of salted cod during processing, storage and after rehydration were investigated. Lipid hydrolysis progress and development of color, primary and secondary lipid oxidation products and fluorescence intensities were determined. Added phosphates significantly retarded lipid hydrolysis and lipid oxidation progress, resulting in lower free fatty acid , lipid hydroperoxides (PV), thiobarbituric acid-reactive substances (TBARS) as well as fluorescence intensities (δF _or and δF _aq). Significant correlation between the lipid oxidation products (PV, TBARS, δF _or and δF _aq) and yellow/brownish discoloration (b* value) of salted cod was observed. Principal component analysis showed that TBARS, b* value and δF _or were the strongest indicators of lipid oxidation during salting and storage.     

Are disulphide bonds formed during acid gelation of preheated milk?

The role of thiol/disulphide exchanges during acid gelation of preheated milk was studied with milk samples with or without N‐ethylmaleimide (NEM), a thiol‐blocking agent, and acidified to pH 4 by the addition of glucono‐delta‐lactone at 20 °C. Active or total thiol groups, particle size with light scattering measurements in a dissociating solvent or by SDS‐agarose electrophoresis were determined on acidified milk samples. Diffusing wave spectroscopy and rheology in low strain were applied during acidification of sample, while rheology in large strain was applied on final acid gels. The only effect of the presence of NEM was a reduced firmness of acid gels as measured at large strain and a reduced tendency to form large aggregates at pH<5.5. In conclusions, thiol/disulphide exchanges during acidification of milk played only a minor role in the building of acid gel networks from heated milk.     

SmartClients: Constraint Satisfaction as a Paradigm for Scaleable Intelligent Information Systems

Many information systems are used in a problem solving context. Examples are travel planning systems, catalogs in electronic commerce, or agenda planning systems. They can be made more useful by integrating problem-solving capabilities into the information systems. This poses the challenge of scaleability: when hundreds of users access a server at the same time, it is important to avoid excessive computational load.We present the concept of SmartClients: lightweight problem-solving agents based on constraint satisfaction which can carry out the computation- and communication-intensive tasks on the user's computer. We present an example of an air travel planning system based on this technology.     

Rainfall estimation from infrared data using an improved version of the Auto-Estimator Technique

In order to apply a suitable procedure for now-casting application in the case of heavy precipitation events, we discuss possible improvements to the Auto-Estimator Technique (AET). The AET rain estimation technique identifies precipitating clouds by comparing two successive infrared satellite images. If the pixel in the second image is colder, then upward motion is assumed and the convective system is considered to be a precipitating cloud. If the pixel in the second image is warmer, then the convective system is likely to be in a weakening phase and no precipitation is assigned. In the case of horizontal movement of the convective system, for instance approaching and weakening, the pixel in the second image can be colder without any upward motion or rain. We propose an improvement of AET (IAET) that determines the cloud top temperature variation and the corresponding rain rate estimation, taking into account the effect of horizontal motion of clouds, obtained by optical flow techniques. Precipitation events over Sardinia during November 1999, May 2000 and June 2000 were analysed. Three-hour cumulated precipitation on one pixel size area were determined by infrared Meteosat data, using both AET and IAET. A comparison between satellite estimation and 49 corresponding ground data stations was made. Contingency tables and relative statistical indices (Bias, False Alarm Ratio, Probability of Detection, Hit Rate, Critical Success Index), and errors on 3 h precipitation (mean absolute error (MAE) and Bias) were computed. When no horizontal motion of the convective system is present, AET and IAET have the same performances. In the events of May 2000, with fast movement of the precipitation system, AET significantly overestimates the rain rate while IAET gives much better performances.