Plastic Limit, Liquid Limit and Undrained Shear Strength of Soil—Reappraisal

The concept that plasticity index of soils can be defined as a range of water contents producing a 100-fold variation in undrained shear strength has been experimentally verified with the help of a large number of tests on soils of diverse nature. This has led to the redefinition of the plastic limit as the water content at which undrained shear strength is around 170 kN/m2. Undrained shear strength of a soil at the liquid limit can be considered to be around 1.7 kN/m2. Accordingly, both the liquid limit and the plastic limit have been determined in the present work by a single consistent method, i.e., the Swedish fall cone method. The undrained shear strength-water content relationship has been found to be log-linear for a wide range of water contents beginning from lower than the plastic limit to higher than the liquid limit. This resulted in the formulation of an expression for predicting undrained shear strength of a remolded soil at any water content based solely on its liquid limit and plastic limit.     

Lung lamellar bodies lack certain key enzymes of phospholipid metabolism

Palmitoyl CoA-glycerol-3-phosphate acyltransferase, phosphatidate phosphohydrolase, and phospholipase A were assayed in subcellular fractions of rat lung, including lamellar bodies, the putative site of storage and secretion of lung surfactant. The specific activity of each of these enzymes in lamellar bodies was relatively low and could be entirely accounted for by a small contamination of the lamellar bodies fraction by microsomes, as quantitated by the presence of the microsomal marker reduced triphosphopyridine nucleotide cytochromec reductase. These data indicate that lamellar bodies are not the site of synthesis of the lipid component of pulmonary surfactant by pathways involving these enzymes.     

Approximate variational inference based on a finite sample of Gaussian latent variables

Variational methods are employed in situations where exact Bayesian inference becomes intractable due to the difficulty in performing certain integrals. Typically, variational methods postulate a tractable posterior and formulate a lower bound on the desired integral to be approximated, e.g. marginal likelihood. The lower bound is then optimised with respect to its free parameters, the so-called variational parameters. However, this is not always possible as for certain integrals it is very challenging (or tedious) to come up with a suitable lower bound. Here, we propose a simple scheme that overcomes some of the awkward cases where the usual variational treatment becomes difficult. The scheme relies on a rewriting of the lower bound on the model log-likelihood. We demonstrate the proposed scheme on a number of synthetic and real examples, as well as on a real geophysical model for which the standard variational approaches are inapplicable.     

Innovations in Individual Feature History Management—The Significance of Feature-based Temporal Model

A feature relies on three dimensions (space, theme, and time) for its representation. Even though spatiotemporal models have been proposed, they have principally focused on the spatial changes of a feature. In this paper, a feature-based temporal model is proposed to represent the changes of both space and theme independently. The proposed model modifies the ISO’s temporal schema and adds new explicit temporal relationship structure that stores temporal topological relationship with the ISO’s temporal primitives of a feature in order to keep track feature history. The explicit temporal relationship can enhance query performance on feature history by removing topological comparison during query process. Further, a prototype system has been developed to test a proposed feature-based temporal model by querying land parcel history in Athens, Georgia. The result of temporal query on individual feature history shows the efficiency of the explicit temporal relationship structure.

A tetrode based fast pulsed microwave source for electron cyclotron resonance breakdown experiments

To study electron cylotron resonance (ECR) breakdown and afterglow plasma in an experimental linear plasma system, a pulsed microwave source with rapid rise and fall of microwave power is desired. A pulsed microwave source with fast rise and fall capability for ECR breakdown experiments has been designed and tested for performance in the system. A tetrode, controlled by a modulator card, is used as a fast switch to initiate microwave power from a conventional magnetron operating at 2.45 GHz. The typical rise time of microwave power is approximately 3 micros and a fall time of approximately 10 micros. Using this scheme in a realistic pulsed microwave source at 800 W power, ECR breakdown of neutral gas is achieved and the plasma delay and fall time are observed from the plasma density measurements using a Langmuir probe. The design details of the fast rise pulsed microwave source are presented in this article with initial experimental results.     

Influence of doctor blade gap on the properties of tape cast NiO/YSZ anode supports for solid oxide fuel cells

In this study, various tape cast NiO/YSZ anode support layers with similar geometric properties are fabricated by varying the doctor blade from 100?µm to 200?µm with an increment of 25?µm. The mechanical properties of the anode support layers are investigated by three point bending tests of 30 samples for each doctor blade gap. The reliability curves of the flexural strength data are also obtained via two-parameter Weibull distribution method. The effects of the doctor blade gap on the microstructure and the electrochemical performance of the anode support layers are determined via SEM investigations and single cell performance-impedance tests, respectively. The apparent porosities of the samples are also measured by Archimedes’ principle. The results indicate that the doctor blade gap or the resultant tape thickness influences the microstructure of tape cast NiO/YSZ anode supports significantly, yielding different mechanical and electrochemical characteristics. At a reliability level of 70%, the highest flexural strength of 110.20?MPa is obtained from the anode support layer with a doctor blade gap of 175?µm and the 16?cm² active area cell with this anode support layer also exhibits the highest peak performance of 0.483?W/cm² at an operating temperature of 800?°C. Thus, a doctor blade gap of 175?µm is found to have such a microstructure that provides not only better mechanical strength but also higher electrochemical performance.     

A new ship energy management algorithm to the smart electricity grid system

In this paper, a new energy management algorithm has been suggested for the ships connected with alternative energies considering the smart electricity grid features. The algorithm focuses on the use of optimum energy source on the shipboard based on the priorities of authorities such as the most economic, environmental, or both criteria at the ports. The algorithm is performed in MATLAB, and several case studies are simulated to validate the results. The 5 maritime nations, which are at different regions: United States, Belgium, Turkey, China, and Australia, are taken into account in the case studies. The actual data of a bulk carrier ship have been used to achieve tangible results in the simulations. The results of the case studies are compared to determine the changes of energy cost and released emission to meet demand of electricity on the ships. Capital cost of the proposed concept is also given to make an economic evaluation. The results show that the ship energy management algorithm provides the significant economic and environmental advantages. This paper aims to contribute to the importance of the ships in the smart electricity grid concept for the maritime and electricity sector representatives.     

Mechanochemical processing and microstructural characterization of pure Fe2B nanocrystals

The results of current investigation demonstrate that mechanochemical processing can be used to synthesize high purity Fe₂B nanocrystals by selecting well-optimized milling conditions, reaction paths and proper starting materials. Microstructure, phase analyses, specific surface area, and magnetic properties of the synthesized nanocrystals were examined by using X-ray diffraction/spectroscopy, electron microscopy, nitrogen adsorption–desorption methods following Brunauer-Emmett-Teller equation and vibrating sample magnetometer techniques, respectively. Removal of MgO impurity phase by leaching the resulting powder in the acetic acid solution yielded single phase Fe₂B nanocrystals with the crystallite size and specific surface area of 12.5 nm and 29 m²/g, respectively. Magnetization results clearly indicated the ferromagnetic behavior of Fe₂B nanocrystals with saturation magnetization observed around 96.26 emu·g^?1. Electron microscope images revealed coaxial/spherical powder shape and morphology of the single-phase Fe₂B nanocrystals.     

Phase Transformation of Metastable ZnSnO3 Upon Thermal Decomposition by In‐Situ Temperature‐Dependent Raman Spectroscopy

Temperature‐dependent in‐situ Raman spectroscopy is used to investigate the phase transformation of zinc metastannate (ZnSnO₃) to zinc orthostannate (Zn₂SnO₄) induced upon annealing in the ambient. ZnSnO₃ microcubes (MCs) were synthesized at room temperature using a simple aqueous synthesis process, followed by characterization using electron microscopy, X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric analysis (TGA). Annealing of the ZnSnO₃ MCs was carried out up to 1000°C, while recording the Raman spectra in‐situ at regular intervals. Phase transformation from metastannate to orthostannate was found to begin around 500°C with an activation energy of ~0.965 eV followed by the recrystallization into the inverse spinel orthostannate phase at ~750°C. Results from this study provide detailed understanding of the phase transformation behavior of perovskite ZnSnO₃ to inverse spinel Zn₂SnO₄ upon thermal annealing.