Biological Water Treatment by a Hybrid Fluidized-Bed Bioreactor: Theoretical Study

A hybrid fluidized-bed bioreactor for water purification was proposed and analyzed. It is a novel type of bioreactor characterized by hitherto unknown stationary and dynamic features. Steady-state characteristics of this hybrid bioreactor with external liquid circulation are presented. A quantitative analysis of steady-state properties of the bioreactor was performed with the aid of an original mathematical model developed for a double-substrate aerobic microbiological process. A steady-state analysis of aerobic processes characterized by different oxygen demand was performed. The effect of essential parameters was evaluated, including carbonaceous substrate concentration in the feed stream to the apparatus, aeration intensity, total residence time of a liquid in the bioreactor, and height of the bed of fine carrier particles.     

The influence of spiral jet-milling on the physicochemical properties of carbamazepine form III crystals: Quality by design approach

The purpose of this study was to investigate the influence of spiral jet-milling process on the physicochemical characteristics of α polymorphic active pharmaceutical ingredient, using Carbamazepine form III as a model drug, and taking into consideration Quality by Design (QbD) approach to pharmaceutical development. A 2^(4-1) factorial screening design was implemented to identify the spiral jet-milling process variables that significantly affect the particle size distribution of milled samples. Diameter of injector nozzles, diameter of ring nozzles and air pressure were selected for further analysis using a 2^(3-1) factorial experimental design. Particle size distribution of additional samples was determined, while physicochemical properties were examined by differential scanning calorimetry (DSC), hot-stage polarized microscopy (HSPM), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), and compared to those of un-milled drug. The gathered results shown that applied experimental design approach is capable to predict material behavior and could help in better understanding of material behavior during jet-milling process. Created design space (DS) provides assurance of product quality, expressed as the powder particle sizes lower than 5 μm, as well as, in initial polymorph form existence after jet-milling through combination and interaction of input variables.     

Electrochemical machining: new possibilities for micromachining

A better understanding of high rate anodic dissolution processes is urgently required for electrochemical micromachining (EMM) to become a widely employed manufacturing process in the electronic and precision manufacturing industries particularly in the micromanufacturing domain. A successful attempt has been made to develop an EMM setup for carrying out in depth independent research for achieving satisfactory control of electrochemical machining process parameters to meet the micromachining requirements. The developed EMM setup mainly consists of various sub-components and systems, e.g., mechanical machining unit, microtooling system, electrical power and controlling system and controlled electrolyte flow system, etc. All these system components are integrated in such a way that the developed EMM system setup will be capable of performing basic and fundamental research in the area of EMM fulfilling the requirements of micromachining objectives.     

Sensitivity of point- and line-source laser-generated acoustic wave to surface flaws

Laser generation and air-coupled detection were combined as a hybrid ultrasonic technique for the inspection of surface flaws in rails. Narrowband acoustic signals were generated using a formed laser source by focusing the laser light to a point and to a line on the surface of the rail. The pulse energy, and therefore the intensity of the laser source, varied such that the generated signal transitioned from the weak thermoelastic to the strong ablative regime. The detection of flaws using a laser-generated surface acoustic wave, in the presence of surface flaws, was compared between both point and line laser sources operating under different pulse energy levels. The line source was found to be more sensitive to the presence of surface flaws than a point source. The sensitivity of the laser-generated acoustic signal appeared to be independent of the severity of the flaw and, within the ablative regime, independent of the laser-pulse energy. Theoretical analysis is provided to explain the underlying cause that influences the interaction of a formed laser-generated surface acoustic wave to surface flaws and how this sensitivity may vary between the thermoelastic and ablative regimes.     

An unprecedented bonding mode for potassium within a PCP-pincer palladium hydride–K-Selectride complex

The reaction of (PCP)^i-PrPdCl and the commonly-used reductant K-Selectride^® solution [K(sec-Bu₃BH) in THF] does not yield a simple (PCP)^i-PrPdH species, but rather an adduct of the Pd–H that contains bound K(sec-Bu₃BH). This adduct has been characterized by X-ray crystallography and shown to be a centrosymmetric dimer in the solid state. The most unique feature of the structure is that the tri-coordinate K⁺ ion bonds only to the terminal palladium hydride and the two bridging boron hydrides. Despite being prepared in THF, no other donor ligands are bound to K⁺. This [H₃K]⁺ bonding mode for K⁺ ions has not been previously reported.     

Optimization of pH value and aluminium sulphate quantity in the chemical treatment of molasses

The aim of this investigation was to find the optimal working conditions for the chemical treatment of molasses that guarantee coagulation and precipitation of undesired macromolecules. Twenty experiments were performed, within the limits: 3.5pH8.5 and 0.1 mol Al/lc0.5 mol Al/l, on samples of molasses treated with Al₂(SO₄)₃ as a precipitant. The efficiency of the treatment was controlled through measuring both the zeta potential and solution absorbance at 560 nm. By analysing the experimental results, it was concluded that the optimum lies within reduced limits of: 4pH7 and 0.2 mol Al/lc0.4 mol Al/l, which covers nine experimental points. Based on these measurements, a mathematical model of absorbance changes was defined, in terms of pH and Al₂(SO₄)₃ quantity. The model was taken as the objective function, and the optimal calculated values were obtained: pH=5.3 and c=0.34 mol Al/l. They guarantee a minimal absorbance value of: 0.124 at 560 nm.     

Application of an ultrasound field in chemical cleaning of ceramic tubular membrane fouled with whey proteins

Chemical cleaning of a severe in-pore-fouling may be improved by applying an ultrasound (US) field in a cleaning-in-place (CIP) system, under both the batch and flow conditions. This study is concerned with the cleaning of a 200-nm ceramic membrane, fouled with whey proteins, in an US field of relatively low frequency of 35 kHz, without applying a transmembrane pressure (TMP) and cross-flow velocity. Two types of cleaning agent solutions of different concentrations were applied: alkali (NaOH) and a mixture of commercial detergents (P3-Ultrasil 67 and 69) at a sonication time of 30 min. It was found that the application of US was less effective in the combination with sodium hydroxide than with the mixture of commercial detergents. Using US in a mixture of 0.25% w/w P3-Ultrasil 67 and 0.4% w/w P3-Ultrasil 69 resulted in the highest flux recovery of 86.5 ± 2.9%, after 30 min of sonication, and produced an overall efficiency of 96.3 ± 0.4%, after the second sonication. It was concluded that the application of the US field in a batch mode, combined with the mentioned chemical agents, can significantly improve the cleaning efficiency.     

The effects of groups' variety and disparity on groups' cognitive complexity.

This study examined the influence of group diversity conceptualized as disparity and as variety on group cognitive complexity. Data on individual cognitive complexity and group cognitive complexity were collected in 44 groups using a conceptual mapping technique. Also data on the quality of teamwork processes and satisfaction were collected using an individual questionnaire. The results indicate that (a) gender variety has a positive impact on group cognitive complexity, (b) cognitive disparity has a negative impact on group cognitive complexity, and (c) groups with a high average individual cognitive complexity have the highest cognitive complexity as a group only if the quality of their interactions is high. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

On the complex electrical conductivity of poly(2,5-furandiylvinylene)

Summary The presented paper deals with the ac-conductivity of undoped and doped poly(2,5-furandiylvinylene) (PFV). It is shown that the electrical conductivity as a complex physical quantity has to be splitted into a real and an imaginary part. Both parts depend on frequency, temperature, type and concentration of doping agents, and external pressure applied to the test specimens.