Effect of complexation of oxidised corn starch with mineral elements on physicochemical properties

The objective of this study was to determine the effect of complexation of oxidised starch with mineral elements on its physicochemical properties. Corn starch was oxidised with sodium hypochlorite and, afterwards, modified with ions of potassium, magnesium and iron. Thus, native and modified starches were analysed for: contents of mineral elements, colour parameters (L*a*b*), water binding capacity and solubility in water at temperature of 60 and 80 °C. Thermodynamic characteristics of gelatinisation by DSC, molecular weight distribution by GPC, intrinsic viscosity and pasting properties by RVA were studied. The efficiency of incorporation of metal ions into oxidised corn starch was about 30%, 20% and 20% for potassium, magnesium and iron ions, respectively. The complexation with potassium ions caused the greatest changes in the molecular weight distribution and the intrinsic viscosity of starches and viscosity of starch pastes. Only modification of starch with iron ions affected the colour parameters of the starch. Incorporation of metal ions into starch resulted also in changes in its water binding capacity and solubility in water.     

Inverse Analysis of Axisymmetrical Compression of HSLA Steel

The objective of the present work is to further explore the problem of selection of the flow stress function which will give the best agreement with experiments for a wide range of the Zener‐Hollomon parameter. Analysis of various flow stress functions was performed, with particular emphasis on the Zerilli‐Armstrong model. Inverse analysis was successfully applied to identify the flow stress model for microalloyed steels deformed in ferrite, two‐phase and austenite regions. Inverse method is applied to interpret the results of the axisymmetrical compression tests performed for HSLA steel samples on a Gleeble 3800 and Split Hopkinson Pressure Bar. Sensitivity analysis is performed based on local and global methods. The objective of the sensitivity analysis in the present study is the evaluation to what extent the selected coefficients in the rheological model influence the result of simulations. In the considered tests this result is represented by two dependent variables, the load and the shape of the sample (barrelling). It is confirmed that the Zerilli‐Armstrong equations should be applied at very high strain rates. Physical meaning is an advantage of this model. Difficulties with identification are the main disadvantage.     

Modelling of plastic flow, heat transfer and microstructural evolution during rolling of eutectoid steel rods

A study was undertaken in an attempt to quantitatively describe the rolling process of eutectoid steel rods. Finite element method was employed to model plastic flow and heat transfer in the deformed material, and heat transfer during cooling to ambient temperature. The numerical calculation gave an assessment of the strain, strain rate and temperature distributions in the work piece. This allowed the prediction of the austenite microstructure evolution during the process. Finally, the relationships describing the microstructure-mechanical properties were used to quantitatively characterize the influence of processing parameters on strength of rods after rolling.     

Oxidative dehydrogenation of ethane on Pt–Sn impregnated monoliths

The oxidative dehydrogenation of ethane was studied over Pt–Sn impregnated monoliths at 1 bar, 600–900 °C and with different contents of oxygen, hydrogen and steam in the feed gas. As expected a decrease in oxygen in the feed led to a decrease in the conversion of ethane due to lower temperatures in the reactor. Adding steam to the feed showed no effect on the ethane conversion or the ethene selectivity. When the hydrogen/ethane ratio in the feed was varied from 0 to 0.5 at 700 and 850 °C, it resulted in a significant increase in the selectivity to ethene while the ethane conversion remained relatively unchanged. At 700 °C the selectivity increased from about 50% to 93% (carbon basis) with only a small decrease in the conversion of ethane. The results clearly show that both Pt and Sn have a catalytic effect. Pt caused the ethane conversion to rise and addition of Sn resulted in much better ethene selectivity. However, even though Sn alone showed some catalytic effect at lower temperatures, it cannot explain the great difference between the Pt and Pt–Sn catalysts. A reasonable assumption is therefore that there exist interactions between Pt and Sn that gives the Pt–Sn catalysts excellent properties for oxidative dehydrogenation of ethane, in particular upon addition of hydrogen.     

Small-scale hydrogen production from propane

Partial oxidation and oxidative steam reforming of propane were investigated over 0.01 wt.% Rh/Al₂O₃ foam catalysts. High selectivity to hydrogen was obtained for both reactions, but addition of steam to the reactant mixture gave higher selectivity to hydrogen. Stability tests over 7 h revealed that the catalytic activity of Rh was quite stable under partial oxidation conditions. Higher loss in Rh activity was observed when steam was present in the reactant mixture. FE-SEM images showed that Rh particle size and distribution are modified under partial oxidation and oxidative steam reforming conditions. However, these changes were more distinct on the catalyst used for oxidative steam reforming.     

Synthesis of trimethylene carbonate/ϵ‐caprolactone copolymers initiated with zinc alkoxide: influence of copolymer chain microstructure on thermal and mechanical properties

Ethylzinc(II ) ethoxide is a highly active and efficient initiator for the bulk polymerization of 1,3‐trimethylene carbonate and its copolymerization with ? ‐caprolactone. This initiator allows one to obtain (co)polymers with high molar masses in quite a short time. Significant difference in co‐monomer reactivity and relatively low participation of intermolecular transesterification processes lead to the obtained copolymers being characterized by a gradient chain microstructure. In ¹³C NMR spectra, in all regions, we observed the presence of triads which were distinctly represented by four peaks for the carbonyl signal. Mechanical tests showed that copolymers containing 70% and more of ? ‐caprolactone presented a relatively high Young's modulus and a very high maximum elongation factor; therefore these materials are promising in many biomedical applications. Due to the high reaction rate, we also made an attempt at copolymerization using reactive extrusion which gave promising results. © 2017 Society of Chemical Industry     

Fluorine-Containing Drug Administration in Rats Results in Fluorination of Selected Proteins in Liver and Brain Tissue

In many pharmaceuticals, a hydrogen atom or hydroxyl group is replaced by a fluorine to increase bioavailability and biostability. The fate of fluorine released from fluorine-containing drugs is not well investigated. The aim of this study was to examine possible fluorination of proteins in rat liver and brain after administration of the fluorinated drug cinacalcet. We assigned 18 Wistar rats to a control group (n = 6) and a group treated with cinacalcet (2 mg kg⁻¹/body weight, 5 days/week), divided into 7 day (n = 6) and 21 day (n = 6) treatment subgroups. Fluorinated proteins were identified using a free proteomics approach; chromatographic separation and analysis by high-resolution mass spectrometry; peptide/protein identification using the Mascot search algorithm; manual verification of an experimentally generated MS/MS spectrum with the theoretical MS/MS spectrum of identified fluorinated peptides. Three fluorinated proteins (spectrin beta chain; carbamoyl-phosphate synthase [ammonia], mitochondrial; 6-phosphofructo-2-kinase/fructose-2, 6-bisphosphatase 1) were identified in the liver and four (spectrin beta chain, dihydropyrimidinase-related protein 4, prominin-2, dihydropyrimidinase-related protein 4) in the brain tissue after 21 days of cinacalcet treatment, but not in the control group. Introduction of fluorine into an organism by administration of fluorinated drugs results in tissue-specific fluorination of proteins.     

Influence of nonlinear coupling of pulses on spatio-temporal compression

Abstract

Properties of a novel configuration of an optical (spatio-temporal) pulse compressor, that is based on a Kerr-type planar waveguide into which two pulses are simultaneously launched, are studied. It is assumed that the pulse which is the subject of the compression propagates in the anomalous dispersion regime, while the auxiliary pulse is in normal dispersion. The best parameters of the proposed compressor are obtained when duration of the auxiliary pulse is so large that this dispersion can be neglected, while energy of the second pulse is above the threshold of first-order soliton generation. It is observed that in such a configuration the compression occurs simultaneously with the generation of a soliton-like solution. It is argued that the proposed configuration with two simultaneously propagating pulses has advantages over the configuration with a single pulse, namely the maximal compression factor and the optimal length of the compressor is, respectively, more than 3 times larger and, at least, 10 times greater than the corresponding values of the compressor with a single pulse. It is also demonstrated that such a compressor can be considered as a universal device, since its operation depends only slightly on the initial parameters of the pulse subject to the compression.     

Electrostrictive properties of ceramics obtained on the basis of ferroelectrk relaxors

We present the results for search of the best ceramic materials for electrostrictive transducers. We performed the following investigations: (1) investigation of different types of ferroelectric, antiferroelectric and non-polar complex oxides with perovskite (OPS) and tetragonal tungsten bronze (TBS) structures; (2) the investigations of the OPS with different degrees of the cations ordering; (3) the measurements of the electrostrictive coefficient Q, Curie-Weiss constant C_W, coefficient of linear thermal expansion λ, polarization P and dielectric permittivity ^σ_r; (4) the X-ray analysis of the structure. The electrostrictive deformation may be very high and the relative strain can be of the order 10^-3 in such materials.