Two-step sinter-crystallization of K2O–CaO–P2O5–SiO2 (45S5-K) bioactive glass

Bioactive glasses and glass-ceramics (GCs) effectively regenerate bone tissue, however most GCs show improved mechanical properties. In this work, we developed and tested a rarely studied bioactive glass composition (24.4K₂O-26.9CaO-46.1SiO₂-2.6P₂O₅ mol%, identified as 45S5-K) with different particle sizes and heating rates to obtain a sintered GC that combines good fracture strength, low elastic modulus, and bioactivity. We analyzed the influence of the sintering processing conditions in the elastic modulus, Vickers microhardness, density, and crystal phase formation in the GC. The best GC shows improved properties compared with its parent glass. This glass achieves a good densification degree with a two-step viscous flow sintering approach and the resulting GC shows as high bioactivity as that of the standard 45S5 Bioglass®. Furthermore, the GC elastic modulus (56 GPa) is relatively low, minimizing stress shielding. Therefore, we unveiled the glass sintering behavior with concurrent crystallization of this complex bioactive glass composition and developed a potential GC for bone regeneration.     

Increasing the photocatalytic and fungicide activities of Ag3PO4 microcrystals under visible-light irradiation

The present study reports for the first time the performance of silver phosphate (Ag₃PO₄) microcrystals as photocatalyst (degradation of Rodamine B-RhB) and antifungal agent (against Candida albicans–C. albicans) under visible-light irradiation (455 nm). Ag₃PO₄ microcrystals were synthesized by a simple co-precipitation (CP) method at room temperature. The structural and electronic properties of the as-synthetized Ag₃PO₄ have been investigated before and after 4 cycles of RhB degradation under visible light using X-ray diffraction (XRD), micro-Raman spectroscopy, UV–Vis spectrophotometer and field emission scanning electron microscopy (FE-SEM) images. The antifungal activity was analyzed in planktonic cells and 48h-biofilm of C. albicans by colony forming units (CFU) counting, confocal laser and FE-SE microscopies. Statistical analysis was carried out using SPSS software. Morphological and structural modifications of Ag₃PO₄ were observed upon recycling. After 4 recycles, the material maintained its photodegradation property; an eightfold increase in the efficiency of Ag₃PO₄ was observed in planktonic cells and a two fold increase in biofilm when irradiated under visible light. Thus, higher antifungal effectiveness against C. albicans was obtained when associated with visible-light irradiation.     

A self-adaptive synthetic over-sampling technique for imbalanced classification

Traditionally, in supervised machine learning, (a significant) part of the available data (usually 50%-80%) is used for training and the rest—for validation. In many problems, however, the data are highly imbalanced in regard to different classes or does not have good coverage of the feasible data space which, in turn, creates problems in validation and usage phase. In this paper, we propose a technique for synthesizing feasible and likely data to help balance the classes as well as to boost the performance in terms of confusion matrix as well as overall. The idea, in a nutshell, is to synthesize data samples in close vicinity to the actual data samples specifically for the less represented (minority) classes. This has also implications to the so-called fairness of machine learning. In this paper, we propose a specific method for synthesizing data in a way to balance the classes and boost the performance, especially of the minority classes. It is generic and can be applied to different base algorithms, for example, support vector machines, k-nearest neighbour classifiers deep neural, rule-based classifiers, decision trees, and so forth. The results demonstrated that (a) a significantly more balanced (and fair) classification results can be achieved and (b) that the overall performance as well as the performance per class measured by confusion matrix can be boosted. In addition, this approach can be very valuable for the cases when the number of actual available labelled data is small which itself is one of the problems of the contemporary machine learning.     

High‐intensity sweeteners in espresso coffee: ideal and equivalent sweetness and time–intensity analysis

The efficient substitution of sucrose by a sweetener in beverages requires the application of some sensory techniques. First, one must determine the concentrations of the sweeteners under study, equivalent in sweetness to the ideal sucrose concentration. In addition, it is fundamental to determine which is most similar to sucrose. The objectives of this study were to determine the ideal sweetness for espresso coffee and the equivalent concentrations in sweetness of different sweeteners, as well as characterise the time–intensity profile of each sweetener in relation to sweetness. The sweeteners evaluated were sucralose, aspartame, neotame, a cyclamate/saccharin mixture (2:1) and stevia. The sucrose concentration considered ideal by consumers was 12.5% (w/v), and the equivalent concentrations of the sweeteners were 0.0159% for sucralose, 0.0549% for aspartame, 0.0016% for neotame, 0.0359% for the cyclamate/saccharin mixture and 0.0998% for stevia. The time–intensity analysis indicated that possibly the sweeteners neotame, aspartame and sucralose would be the best substitutes for sucrose.     

Development and evaluation of antimicrobial natamycin‐incorporated film in gorgonzola cheese conservation

Conservation of food products depends on product quality and packaging suitability. The objective of this work was to develop and evaluate the antimicrobial efficiency of natamycin‐incorporated film in the production process of Gorgonzola cheese. It aims to optimize the production process and increase shelf‐life and food safety for the consumer. Films with different concentrations of natamycin were produced and tested in Gorgonzola cheeses to evaluate its efficiency against Penicillium roqueforti on the cheese surface. Films with 2 and 4% natamycin presented satisfactory results for fungus inhibition and the amount of natamycin released to the cheese was below that allowed by the legislation. Copyright © 2006 John Wiley & Sons, Ltd.     

Expression of INK4 inhibitors of cyclin D-dependent kinases during mouse brain development

In situ hybridization of mouse embryo sections demonstrated expression of mRNAs encoding two polypeptide inhibitors (p18INK4c and p19INK4d) of cyclin D-dependent kinase (CDK) 4 and CDK6 in the central nervous system. No expression of two other INK4 members, p16INK4a and p15INK4b, was observed. The p19INK4d and p18INK4c proteins formed complexes with either CDK4 or CDK6 in a temporal pattern consistent with the results of in situ hybridization. Expression of INK4c was observed at embryonic day 13.5 in neuroepithelial zones of the developing brain, being restricted to dividing neuroblasts but absent from differentiating postmitotic neurons. In the neocortex, p18INK4c was expressed precisely at those developmental stages when neuroblasts switch from a symmetric to an asymmetric pattern of cell division with concomitant increases in their G1 interval. INK4d RNA was detected from embryonic day 11.5 onward, at higher levels than INK4c and with a distinctly different spatial and temporal pattern. Marked INK4d expression was seen in dorsal root ganglia, spinal cord, and focally throughout the brain, but primarily in postmitotic neurons. Neural expression of INK4d continued postnatally into adulthood in postmitotic cells of the dentate gyrus, the pyramidal layer of the hippocampus, and in discrete regions of the cerebral cortex, cerebellum, thalamus, and brainstem. Downregulation of p19INK4d in the dentate gyrus after kainic acid-induced seizures indicated that its expression could also be modified in nondividing cells by excitotoxic stress. Therefore, p19INK4d may contribute to maintaining the quiescent state, acting as a buffer to prevent reactivation of cyclin D-dependent kinases in terminally differentiated cells.     

A novel metal-insulator-metal structure for field-programmabledevices

A metal-insulator-metal (MIM) capacitor structure has been developed for use in field-programmable gate arrays (FPGAs) as a voltage-programmable link (VPL). The structure relies on a combination of a refractory metal and aluminum as the lower electrode, and either a similar combination or aluminum alone as the top electrode. The insulator is prepared by means of plasma-enhanced chemical vapor deposition (PECVD). It comprises a sandwich of nearly stoichiometric silicon dioxide interposed between two like layers of silicon-rich silicon nitride. The structure has displayed characteristics desirable for use in emerging FPGA technology, including high density, low on-resistance, reduced capacitance, and low programming voltage